Sort by:
Salvimar Ares Nightmare - Speargun for Freediving and Spearfishing
Salvimar Ares Nightmare is a speargun designed for spearfishing and freediving, featuring a barrel with a polygonal elliptical cross-section. The angles of this cross-section are engineered to create strategic wall thicknesses that increase the overall rigidity of the speargun, ensuring a solid structure during tracking and shooting.
Structure and Materials
Strength is further enhanced by the integrated open-track shaft guide, extending from the handle to the muzzle, allowing smooth and precise shaft guidance. The symmetrical handle is made of nylon reinforced with 30% fiberglass, providing a balance between lightness and mechanical strength. The release mechanism is self-centering and made entirely of stainless steel using MIM technology, ensuring long-lasting reliability and durability.
Muzzle and Shooting System
The innovative muzzle features two separate holes that reduce band friction, thereby increasing power at the moment of the shot. A distinctive technical detail is the step built into the tip, specifically designed to support the shaft flopper without the need for an O-ring, optimizing shaft stability upon release.
Components and Configuration
- BOLT 7.0 mm shaft with a calibrated length for efficient power transfer
- Double Primeline band supplied, 14 mm diameter, balanced to deliver responsiveness and power
- Nylon aiming segment on the rear of the cassette that improves sightline visibility
- Compatible with all Salvimar reels, for a customizable and practical setup in the water
Available Versions
The speargun is available in 4 different lengths: 75 cm, 85 cm, 95 cm, and 105 cm, to suit different freediving conditions and spearfishing styles.
Arrow Carbon Speargun - Cetma Composites
The Arrow speargun by Cetma Composites is a monocoque carbon band speargun with extreme lines, designed for inshore spearfishing. The shape of the barrel recalls an arrow: a radically minimal design, with no muzzle, providing a perfect sight line with full view of the shaft in all conditions.
Monocoque Design and Maneuverability
The monocoque carbon structure is shaped with side grooves that bring the bands closer to the shaft, minimizing the speargun’s cross-section. Thanks to the recessed band geometry and the ultra-thin profile, the Arrow is extremely maneuverable and easy to swing, both horizontally and vertically — essential for moving nimbly among rocks and inshore crevices.
Reel Integrated into the Barrel
The reel is integrated directly into the barrel, available in two line-capacity versions: 50 meters or 90 meters. This construction solution eliminates external protrusions, making the speargun even sleeker and better balanced without sacrificing line capacity. A design choice that translates into real maneuverability while hunting.
AISI 316L Stainless Steel Release Mechanism
The release mechanism is made entirely from AISI 316L stainless steel by EDM machining, ensuring maximum dimensional precision, resistance to marine corrosion, and long-term reliability. The system used is the double-roll mechanism with integrated line release, with the option to position the line release on the right or left side according to the spearfisher’s preference.
Bands and Shaft Setup
- Bands: Black Progressive CETMA Composites Bands
- Double-band configuration: two pairs with 14 mm diameter
- Single-band configuration: 17.5 mm diameter
- Shaft: 6.5 mm diameter × 115 cm length
- Shaft with single flopper and double loading tabs
- Recommended band: Progressive Black
Availability and Lengths
The Arrow carbon speargun is available in multiple lengths to suit different hunting needs and seabed profiles. The Standard version offers an optimal balance of power, accuracy, and maneuverability for inshore spearfishing and rocky environments.
Cetma Composites Technology
Cetma Composites designs and manufactures its spearguns using a proprietary production process called Zero-Defects Technology, which makes it possible to obtain fully monolithic carbon fiber structures with zero internal voids. The result is maximum stiffness, unchanged over time, and superior build quality — to the point that Cetma products are not painted, leaving the carbon exposed as a guarantee of manufacturing excellence.
Rob Allen Caranx Railgun Freediving Speargun
The Rob Allen Caranx Railgun is a speargun designed to deliver durability and strength, even with frequent use on boats or in rocky environments. Its construction is engineered to provide solidity and impact protection, ensuring long-term reliability.
Main technical features
- Barrel made from aircraft-grade aluminum with an integrated shaft rail, increasing structural rigidity and eliminating flex during the shot.
- Shaft rail aligned with the profile of the trigger mechanism and muzzle, ensuring accuracy and easy tracking.
- Handle in glass-fiber-reinforced nylon (Vecta Handle Blue), providing comfort and optimal control during use.
- Mechanism made from solid, corrosion-resistant stainless steel for greater long-term reliability.
- Shaft 6.6 mm Impact tricut tip, ideal for penetration and accuracy on fish.
- Band single circular 18.0 mm Blue Rubber, optimized for effective balance of shooting power.
- Head Vecta Low Profile Muzzle, designed to minimize hydrodynamic drag and improve smooth movement through the water.
- Rigging with 2.0 mm Black Mono nylon line for strength and long-lasting durability.
- Equipped with a shock absorber and Shark Clip, useful accessories for safety and practicality in the water.
Available versions
The Caranx Railgun is available in three lengths: 70 cm, 80 cm and 90 cm, covering a wide range of spearfishing applications for small to medium-sized fish.
Functionality and use in spearfishing
The Caranx Railgun’s easy loading and resetting make it especially efficient during spearfishing sessions, allowing you to get back into action quickly after the shot. The combination of materials and design provides high rigidity and accuracy, essential features for spearfishing.
Dark Side Salvimar Pneumatic Speargun with Vacuum System
The Dark Side Salvimar is a pneumatic speargun designed with a Vacuum system to optimize power transmission and improve shaft exit speed. The cylindrical tank is made from high-modulus Pre-Peg TW-K03 carbon fiber, a material that delivers an ideal combination of lightness, mechanical strength, and stiffness, ensuring easy loading and precise balance during dives.
The ergonomic glass-filled nylon handle provides a comfortable, secure grip, reducing fatigue during spearfishing sessions and allowing smooth, controlled tracking.
Main technical features:
- High-modulus Pre-Peg TW-K03 carbon fiber tank for excellent stiffness and lightness
- Vacuum system to maximize shaft exit speed
- Ergonomic glass-filled nylon Handle
- Integrated power regulator to adjust thrust according to different fishing conditions
- Race Kit included as standard equipment
- Tahitian Shaft supplied as standard
- Available in four lengths: 75 cm, 85 cm, 99.9 cm, and 115 cm
The Dark Side Salvimar is intended for spearfishers who require a balanced, precise, and highly responsive pneumatic speargun, with selected materials designed to ensure reliability and performance in underwater environments.
H. Dessault Eagle Speargun
Eagle is a speargun designed for spearfishing, featuring a minimalist, rugged, and modern design engineered to maximize accuracy and efficiency in the water.
Main Technical Features
- Hydrodynamic 2-hole Muzzle, designed to keep the bands organized and out of the line of sight, allowing parallel loading in relation to the shaft.
- High release propulsion and increased shaft exit speed thanks to the band positioning.
- Reversible stainless steel line release with beveled edges, specifically designed to prevent cutting during use.
- Anodized aluminum Barrel with 28x26 mm diameter, equipped with an integrated full-length shaft guide for optimal power transfer.
- Barrel-Handle connection via steel pin and double sealing O-ring, ensuring strength and reliability.
- Frictionless AISI 316 stainless steel Trigger Mechanism, with adjustable line release and rotary safety, for a smooth and precise release.
- Plastic plate on the trigger to improve ergonomics during use.
- Ergonomic Handle in reinforced Nylon, with integrated loading butt and bayonet-fit polypropylene grip, designed for comfort and control in the water.
- Reel mount rail with line spacers and setup for attaching roller lines, improving line management in the water.
- Supplied complete with a 6.5 mm stainless steel shaft with 3 shark fins for stability and accuracy, paired with Primeline Black 17.5 mm circular bands for consistent, reliable tension.
Availability
The Eagle speargun is available in four different lengths: 65, 75, 90, and 100 centimeters, to suit different spearfishing needs and techniques.
Rob Allen EX Carbon GT Speargun for Spearfishing
The EX Carbon GT is designed specifically for spearfishing, ideal for those looking for a powerful yet streamlined speargun with no unnecessary components. Its construction is engineered to ensure long-lasting durability and resistance to impacts and stress during dives.
Technical Features
- Extruded carbon Barrel: manufactured in-house at the Rob Allen facility, it ensures high stiffness and full control over quality. The integrated Shaft rail eliminates flex, improving accuracy and shot smoothness.
- Handle: made from fiberglass-reinforced nylon for an excellent balance of light weight and mechanical strength.
- Mechanism and line releases: made from stainless steel, ensuring durability and reliability even in the marine environment.
- 7.5 mm tri-cut Impact Shaft: provides optimal penetration on the most demanding spearfishing targets.
- Double 16.0 mm Blue Rubber band: twin circular Bands configuration for powerful, consistent propulsion in the kick cycle.
- Vecta Open Muzzle head: open design to support hydrodynamics and easy Shaft retrieval.
- Shock Absorber and Shark Clip: improve trim management and equipment safety during spearfishing action.
Use and Applications
The EX Carbon GT, available in 130, 140, and 150 cm lengths, is designed for bluewater hunting and is especially suited to targeting species such as tuna, amberjack, wahoo, billfish, and large marine predators. Its technical configuration allows fast, intuitive reloading, letting you get back into action within seconds even after the shot.
Configuration Specifications
- Available lengths: 130 cm, 140 cm, and 150 cm
- Handle: Vecta Handle Blue
- Line release: stainless steel
- Bands: double Blue Rubber 16.0 mm band
- Shaft: 7.5 mm tri-cut impact
- Barrel: carbon with full-length Shaft rail
- Muzzle: Vecta Open Muzzle (open)
- Rigging: Black Mono 2.0 mm nylon
- Additional accessories: Shock Absorber and Shark Clip
Origin
Designed and assembled in South Africa, with rigorous quality control that ensures precise standards for freedive spearfishing.
H. Dessault Fenix Speargun
Fenix is the first speargun in the line by H. Dessault, designed specifically for spearfishing. Its construction combines high-quality materials and advanced technical solutions, ensuring efficiency and accuracy in underwater use.
Technical Features
- 2-hole Muzzle: hydrodynamic design with two separate holes to keep the bands organized and away from the line of sight, allowing the bands to be loaded parallel to the shaft. This significantly improves propulsion and shaft exit speed.
- Reversible stainless steel line guide: beveled side to prevent accidental cutting, with an integrated adjustable line release that can be positioned on either the right or left side.
- Anodized aluminum Barrel: with an integrated full-length shaft guide, 30x28 mm dimensions, for perfect shaft seating and mechanical strength while keeping weight low.
- Auto-R Trigger Mechanism: made of AISI 316 stainless steel, with an anti-slip coating on the trigger for greater safety and release precision.
Handle and Comfort
- Handle in reinforced Nylon with an ergonomic polypropylene grip featuring soft, anti-slip TPR overmolding, designed to provide a secure and comfortable hold during the dive.
- Spacer adjustment to adapt the size of the grip and chest loading pad, improving ergonomics and load distribution.
- Dual reel attachment, compatible with both horizontal and vertical mounts, for optimal line management in different spearfishing setups.
Accessories and Versions
- The speargun is supplied complete with a high-strength 6.5 mm stainless steel shaft and Primeline Gray circular bands, ensuring long-term durability and reliability.
- Available in five distinct lengths: 65, 75, 85, 95 and 105 centimeters, to suit different fishing needs and diving styles.
Additional Details
- Handle compatibility with C4 anatomical grips, allowing advanced customization according to the freediver’s preferences.
- Rear-positioned Auto-R mechanism to improve balance and smooth tracking in the water.
With Fenix, the combination of materials such as anodized aluminum, AISI 316 stainless steel and reinforced Nylon, together with ergonomic and functional solutions, ensures an efficient, accurate and comfortable speargun for spearfishing and freediving.
Fenix Carbon Speargun for Spearfishing by H. Dessault
Fenix Carbon is a speargun made entirely from carbon fiber, designed for spearfishing. The barrel features a hydrodynamic profile with an integrated full-length shaft guide and a 30x27 mm diameter, delivering light weight, rigidity, and efficient power transmission.
Muzzle and Handle
- Muzzle with hydrodynamic design, available with 2 or 3 holes separated to keep the bands organized and out of the line of sight, supporting parallel band tension to maximize thrust on release and shaft speed.
- Ergonomic handle in reinforced nylon with an anatomical polypropylene grip overmolded in soft, non-slip TPR, for superior comfort and control during tracking.
- Adjustable shims to customize the size of the grip and chest loading pad, adapting to different body types.
- Compatible with C4 anatomical grips for additional customization.
Release Mechanism
The speargun is equipped with an AISI 316 stainless steel Auto-R mechanism, with an integrated line release that can be positioned on either the right or left side. The trigger features a non-slip plastic coating, improving release control.
Technical Features
- Reversible stainless steel line guide with rounded edges to prevent accidental cuts to the bands.
- Dual mounting points for both vertical and horizontal reels, increasing practicality in the water.
- Watertight seal ensured by O-rings and silicone plugs, providing reliability while freediving.
- Complete with stainless steel shaft and 14.0 mm Primeline Gray circular bands, specifically for spearfishing.
Variants and Length Specifications
- Available in 5 lengths: 75, 90, 100, 115, and 130 centimeters.
- The 75, 90, and 100 cm models are fitted with a 2-hole muzzle and a 6.5 mm diameter shaft.
- The 115 and 130 cm models feature a 3-hole muzzle and 7.0 mm diameter shafts.
H. Dessault Fenix Ocean Speargun
The Fenix Ocean is a speargun designed specifically for spearfishing, featuring a hydrodynamic and functional design.
Technical features of the muzzle
- Muzzle with 3 separate holes to keep the bands organized and away from the sight line
- Parallel band loading in relation to the shaft, optimized to increase release propulsion and shaft exit speed
- Reversible stainless steel line guide with beveled sides to prevent accidental cutting
Structure and materials
- 30x27 mm diameter anodized aluminum barrel, with integrated full-length shaft guide
- Anti-scratch camouflage finish in blue tones, applied through heat transfer, for abrasion resistance and camouflage in underwater environments
Trigger Mechanism
- Auto-R mechanism in AISI 316 stainless steel, positionable on the right or left side
- Built-in line release for safe, fast release
- Trigger with non-slip plastic coating to improve grip and control
Handle and comfort
- Handle in reinforced Nylon with ergonomic polypropylene grip overmolded in soft, non-slip TPR
- Adjustable spacers to customize grip size and chest loading pad, adapting to the freediver’s preferences
- Dual reel mount for both horizontal and vertical reels, increasing the versatility of the equipment
- Compatible with anatomical grips from the C4 brand
Equipment and variants
- Sold complete with 7.0 mm stainless steel shaft with tricuspid tip for penetration and accuracy
- 14.0 mm Primeline Gray Circular Bands, combined to maximize propulsion and release detection
- Available in 100, 110, 120 and 130 centimeter lengths, to suit different spearfishing needs
Mares Force Pneumatic Speargun
Force is a Mares pneumatic speargun with a 13 mm barrel and vacuum Muzzle, designed to provide lightness and hydrodynamic performance. The Dry Sistem, integrated into the muzzle, prevents water from entering the barrel, helping improve maneuverability and deliver a more stable shooting line.
Main Technical Features
- Vacuum Muzzle with Dry Sistem to block water entry and optimize the speargun’s smooth handling while freediving.
- 13 mm inner barrel, offset upward for a better shooting line and greater accuracy in spearfishing.
- Fiber optic sight positioned on the upper part of the barrel, for a clearer and more precise view even at greater depths.
- Power regulator that allows the speargun to be loaded gradually and fired at reduced power for close-range shots.
- Trigger and line release in stainless steel with high sensitivity for an exceptionally smooth shot.
Design and Ergonomics
- Handle with a soft, high-visibility yellow grip, designed to ensure comfort and control during use.
- Safety lever made in the same color for easy identification.
- Internal compartment in the grip for storing the loader, plus a stainless steel pin, useful for attaching cords or bungees.
Accessories and Availability
- Speargun supplied complete with a 7.0 mm Tahitian shaft.
- Includes a carry bag.
- Available in 5 lengths: 55 cm, 70 cm, 90 cm and 100 cm.
- Compatible with Strike reels equipped with a dedicated mount.
Salvimar Hero Open Muzzle Speargun
The Salvimar Hero is an open-muzzle speargun for spearfishing, featuring an extruded aluminum barrel that is fully sealed and balanced to ensure optimal trim in the water. The aluminum construction provides mechanical strength and lightness, essential for smooth handling during spearfishing.
Handle and control
The Salvimar Hero handle features exclusive characteristics that improve grip and full control of the speargun. This configuration promotes optimal recoil absorption, resulting in greater shot accuracy and increased power during the catch.
Versatility and intended use
Available in eight different lengths (65, 75, 85, 95, 105, 115, 125 and 135 cm), the Salvimar Hero adapts to a wide range of spearfishing scenarios:
- Shorter versions suitable for coastal hunting, targeting species such as white fish, seabass, and gilthead seabream.
- Mid-size models ideal for greater depths when targeting groupers, amberjack, and dentex.
- Longer lengths (125 and 135 cm) designed for bluewater hunting, with the capability to take on large pelagic species such as wahoo and tuna.
Technical configuration and materials
The speargun comes standard with double or triple 14 or 16 mm circular bands, selected according to model length, ensuring an optimal balance between band power and loading comfort.
- The wishbones are made from Dyneema and hand-tied to ensure durability and reliability.
- It is equipped with a Mini 50 or Maxi reel, selected according to speargun size, for efficient line management.
- The steel shaft is offered in 7.0 or 8.0 mm diameters depending on length, ensuring rigidity and precision when swinging and tracking the gun.
- The standard bands are intentionally soft to make the speargun easier to use, while the gun’s structure supports the installation of stronger and more powerful band setups.
Technical support and advice
You can take advantage of the technical service center for free advice and personalized support, to optimize the setup and maintenance of the speargun according to your specific spearfishing needs.
Hero Carbon Speargun for Spearfishing
The Hero Carbon Speargun is an advanced technical solution for spearfishing and freediving. Built with a cuttlefish-bone carbon barrel, it delivers an optimal combination of lightness and stiffness for greater efficiency during spearfishing.
Main Technical Features
- Cuttlefish-bone carbon barrel: lightweight, durable structure that promotes better streamlining and easier tracking underwater.
- Integrated shaft track: ensures precise shaft alignment, improving shot accuracy.
- Rear-positioned trigger mechanism by approximately 5 cm compared to the standard configuration, increasing shooting power by optimizing shaft release.
- HERO non-slip elastomer handle, designed to promote natural alignment between arm and speargun, improving comfort and control during spearfishing.
- Reversible line release, usable on either the right or left side depending on the freediver’s needs.
- Double-band muzzle with cellular structure, which reduces overall weight, improves buoyancy, and minimizes lateral movement while ensuring a balanced trim.
- Stainless steel line guide for greater mechanical strength and long-lasting durability.
Rigging Specifications and Variants
- 6.5 mm single-flopper shaft, suitable for excellent thrust transfer.
- 16.0 mm Megaton bands, designed to provide proper elasticity and power during loading.
- Integrated Shock Absorber to reduce shock and extend band life.
- Available in four different lengths: 75 cm, 90 cm, 100 cm, and 110 cm, to suit different hunting needs and underwater environments.
Salvimar Hero Nightmare - Speargun for Spearfishing
Hero Nightmare is a speargun designed specifically for spearfishing, featuring a marine-grade aluminum alloy barrel with an asymmetrical elliptical cross-section that delivers an optimal combination of lightness and strength. The Teflon shaft guide ensures minimal friction, improving shot smoothness and accuracy while freediving.
Trigger and propulsion systems
The Heavy Metal 350 trigger mechanism, made entirely of stainless steel using MIM technology, is designed to withstand loads up to 350 kg, ensuring a reliable, long-lasting release of the bands. The speargun’s open muzzle allows versatile use with either a single band or dual 16 mm bands, making it easy to customize shot power according to the freediver’s needs.
Accessories and compatibility
- Equipped with a shaft and dual 16 mm Primeline Salvimar bands, optimized to maximize responsiveness and power transfer.
- Compatible with all Salvimar reels, for efficient line management and greater practicality in the water.
Available variants
The Hero Nightmare model is available in several lengths to suit different uses and spearfishing conditions: 75 cm, 85 cm, 95 cm, 105 cm, 115 cm and 125 cm.
Salvimar Hero Roller Speargun: balanced and high-performance speargun for freediving
The Salvimar Hero Roller Speargun is a speargun for freediving that combines a mid-range price point with advanced technical features, suitable for spearfishing from the nearshore shallows to deep bluewater.
Materials and construction
The barrel is made from sealed extruded aluminum, ensuring perfect balance that improves stability and control while freediving. The ergonomic handle provides a secure grip, while the recoil absorption system contributes to powerful, accurate shots, essential for spearfishing.
Muzzle and loading
The roller muzzle in nylon loaded with 30% fiberglass ensures light weight and long-lasting mechanical strength. It is equipped with high-smoothness pulleys, optimized to support bands up to 18 mm, making loading quick and intuitive even in demanding conditions.
Standard equipment
- 16 mm roller band with loading assist to make tensioning easier
- Hand-tied dyneema wishbones for maximum safety and durability
- Calibrated shafts from 7.0 to 8.0 mm selected to optimize accuracy and penetration
Versions and uses
The speargun is available in five different lengths (75, 85, 95, 105 and 115 cm) to suit different spearfishing techniques and freediving conditions.
Salvimar Hero Storm Speargun - Limited Edition
The Salvimar Hero Storm is a speargun designed for spearfishing, built to deliver an excellent balance of quality and price, comparable to higher-end models. It stands out for its limited-edition Storm graphics and carefully engineered technical design.
Technical Features
- Barrel made from extruded aluminum, fully watertight, ensuring mechanical strength and optimal balance in the water.
- Handle ergonomic with an exclusive design that ensures a secure grip and maximum control of the speargun, reducing recoil and improving accuracy and power in shots.
- Standard setup with twin 16 mm circular bands, selected to balance smooth loading and power. The speargun supports configurations with stiffer bands, customizable through consultation with the technical service center.
- Muzzle open multi-band design, optimized for multiple setups.
- Wishbones in hand-tied Dyneema, ensuring strength and reliability.
- Reel Vertical 70 included as standard, for efficient line management.
- Shafts with a diameter of 7.0 or 7.5 mm depending on the speargun length, calibrated to ensure accuracy and smooth tracking.
Available Variants
The Salvimar Hero Storm is available in four lengths to suit different spearfishing needs:
- 85 cm
- 95 cm
- 105 cm
- 115 cm
Technical Notes
This combination of materials and design delivers a balanced, easy-handling speargun, ideal for spearfishing. Attention to detail in recoil management and band selection contributes to greater effectiveness in power transfer during finning, with outstanding shot accuracy.
Mares Jet Pneumatic Speargun
The Jet pneumatic speargun by Mares combines reliability with a refreshed design in a technical configuration developed for spearfishing. The total black finish with orange details gives it a discreet, aggressive look, ideal for targeted dives.
Technical Features
- Threaded Shaft 8 mm for greater strength and shot accuracy
- Inner barrel 13 mm, optimized to ensure a good balance between power and smooth operation
- Outer barrel 40 mm, durable and compact for improved underwater trim
- Lightweight one-piece Muzzle, for easier tracking and handling
- Integrated side line release system, making line management easier during use
Available Versions
- Version without power regulator available in 42 cm, 58 cm, and 70 cm lengths
- Version with power regulator available in 58 cm and 70 cm lengths
Efficiency and Use
The Mares Jet is designed to offer a balance between light weight and strength, ensuring good shot accuracy and smooth tracking, both essential in spearfishing. The quality materials and precise construction ensure high durability and optimal handling in the water.
Pathos Laser Carbon Roller Freediving Speargun
The Laser Carbon Roller speargun is a compact and powerful underwater speargun, designed specifically for experienced freedivers who require a hydrodynamic and maneuverable tool for spearfishing.
Construction features
- Barrel made from pure carbon, 2.0 mm thick, with a glued shaft guide to ensure light weight and mechanical strength.
- Integrated cuttlefish-bone Float with dedicated band attachment, optimized for in-water trim.
- D'Angelo II anatomical Handle for right-handed users, with a long, flattened butt, coated in non-slip rubber for a secure grip during loading.
- Replaceable Handle with universal or left-handed version, adaptable to the specific needs of the spearfisher.
- Rear-positioned Trigger Mechanism, made entirely of stainless steel, with a 7 cm travel for a smooth yet powerful and precise release.
- Glass-reinforced Nylon Muzzle, combining the roller system with a Circular Band, delivering a long shot and immediate initial thrust.
Specific components and included equipment
- 7.0 mm Sandvik steel Shaft with a single lower flopper, equipped with shark fins and a tri-cut tip for accuracy and target-line stability.
- 16.0 mm red TNT Band for the roller system, ensuring consistent thrust during spearfishing.
- 14.0 mm red Circular Band (booster), improving the responsiveness of the initial thrust.
- Compatible with any Pathos reel for advanced line management.
Available sizes
The speargun is available in five different lengths to suit different spearfishing styles:
- 82 cm
- 90 cm
- 100 cm
- 110 cm
- 120 cm
The Laser Carbon Roller is designed for freedivers looking for a balanced, responsive speargun, with components engineered to optimize power transmission and handling at depth.
Laser Evo Carbon Speargun for Freediving and Spearfishing
The Laser Evo Carbon is a speargun designed for freediving and spearfishing, featuring a compact, lightweight body made from pure carbon fiber with a 2.0 mm thickness. This construction ensures high mechanical strength together with smooth tracking and excellent hydrodynamics, key features for efficiency underwater.
Materials and Construction
- Carbon fiber Barrel with integrated shaft track made from the same material to ensure lightness and rigidity.
- Trigger Mechanism made entirely of stainless steel to ensure long-lasting durability and reliability.
- Open Muzzle with dual holes that keeps the bands parallel to the barrel, increasing shot accuracy and power.
Handle and Mechanism
The anatomical handle D'Angelo II (2023 edition) features a long, flattened butt with an extended loading pad covered in non-slip rubber, improving grip and comfort during loading. The trigger mechanism includes a side line release and an inverted trigger, designed to maximize practicality and trigger precision.
Components and Setup
- Double 14 mm circular bands in TNT GREY for balanced, consistent pulling force.
- 6.75 mm Sandvik steel Shaft, single flopper, equipped with shark fins and a tri-cut tip to improve penetration.
- Available in four lengths: 90 cm, 100 cm, 110 cm, and 120 cm, to suit different hunting styles and underwater conditions.
- Some models are designed for mounting the Evo 40 or Evo 50 reel, optimizing shaft retrieval on longer spearguns.
Performance and Applications
The Laser Evo Carbon is intended both for experienced freedivers who require a high-performance, accurate speargun and for beginners who need a tool that is easy to handle. The combination of advanced materials, ergonomic design, and reliable mechanics ensures effective, comfortable use during freediving and spearfishing.
Apnea Laser Evo Pro Speargun
The Laser Evo Pro speargun is the evolution of the well-known Laser Open band speargun, designed to deliver compactness, light weight, and power. It is engineered to provide ideal ergonomics and optimal maneuverability, making it suitable for both entry-level spearfishers and experienced spearfishing professionals.
Technical Features of the Barrel
The barrel is made from 1.25 mm anodized aluminum with an open integrated shaft guide. The surface treatment provides superior rigidity and a “shark skin” texture that improves tracking by reducing friction during the shot, optimizing smoothness and shooting accuracy.
Handle and Trigger Mechanism
The speargun is equipped with the D’Angelo 2 anatomical handle, 2023 version, featuring a side line release and an inverted trigger mechanism. This handle, designed for optimal comfort and effective ergonomics, can be replaced with universal versions or left-handed-specific options.
Each handle includes a loading butt covered with non-slip rubber to improve grip during loading.
The rear-positioned Trigger Mechanism, made entirely from stainless steel, delivers a smooth yet powerful release, enhanced by an increased stroke of 7 cm, allowing efficient power transfer without loss.
Muzzle and Loading System
The single-hole open muzzle not only provides a wide field of view for improved aiming, but also allows quick shaft replacement after each shot. This system allows the use of shafts of various lengths without compromising shot power, increasing versatility for different spearfishing techniques.
Included Components
- Double 14 mm TNT Grey circular bands for effective elastic energy storage.
- 6.75 mm Sandvik steel shaft with shark fins and single flopper to improve stability and trajectory.
- Tricuspid tip to ensure effective penetration without deformation.
Available Length Options
The speargun is available in six lengths to suit different spearfishing styles and conditions:
- 50 cm
- 60 cm
- 75 cm
- 82 cm
- 90 cm
- 100 cm
Additional Details
- Compatible with any Pathos reel for efficient line management during the catch.
- Trigger Mechanism and handles designed to increase corrosion resistance and operational lifespan in marine environments.
Laser Open Speargun for Freediving and Spearfishing
The Laser Open is a speargun designed for spearfishing, featuring a compact design, light weight, and high power. Suitable for both beginners and more experienced spearfishers, it stands out for its easy tracking and shooting accuracy.
Technical Features of the Barrel
The barrel is made from 1.25 mm anodized aluminum with an integrated open-slot shaft guide. The surface treatment provides superior rigidity and a sharkskin texture, improving grip during tracking and reducing friction during the shot.
Handle and Trigger Mechanism
- Fitted with the anatomical D'Angelo II handle, designed for right-handed users and featuring a long, flattened butt, replaceable with universal or left-handed versions.
- Each handle includes a loading pad covered in non-slip rubber to improve grip during loading.
- Rear-positioned Trigger Mechanism made of stainless steel, with a 7 cm travel, providing a smooth yet powerful release.
Muzzle and Shaft
The single-hole open muzzle offers a wide sight picture for aiming and allows quick, practical shaft replacement. This configuration also allows the use of shafts of different lengths without affecting shot power.
The speargun comes with a 6.5 mm Sandvik steel shaft equipped with shark fins and a tri-cut tip, ideal for reliability and accuracy in the water.
Accessories and Versions
- Single 19 mm Circular Band for balanced, reliable propulsion.
- Compatible with all Pathos reels, ensuring greater versatility.
- Available in five different lengths: 50 cm, 60 cm, 75 cm, 82 cm, and 90 cm, to suit different spearfishing needs.
Laser Open Carbon Speargun for Freediving and Spearfishing
Laser Open Carbon is a speargun designed for experienced freedivers who require a balance of lightness, power, and underwater maneuverability. Its body is made from 2.0 mm thick pure carbon, including the shaft guide, to ensure excellent mechanical strength while maintaining a compact, hydrodynamic profile.
Construction and Materials
- High-quality full carbon barrel for exceptional lightness and rigidity
- Carbon shaft guide for efficient power transfer and excellent durability
- D’Angelo II anatomical handle specifically for right-handed users, with a long, contoured butt, also available in universal or left-handed versions
- Loading butt pad covered in non-slip rubber for a secure grip during loading
Release Mechanism
The speargun features a rear-positioned release mechanism trigger made entirely of stainless steel, with an extended 7 cm travel. This system ensures a smooth yet powerful release, essential for precise and reliable line release while freediving.
Open Muzzle and Shaft
- Open Muzzle designed to provide a wide field of view for aiming
- Allows quick shaft changes immediately after the shot and the use of different lengths without altering shot power
- 7.0 mm Sandvik steel single-flopper shaft with shark fins and tri-cut tip, selected to ensure accuracy and optimal penetration
Bands and Accessories
- Supplied with twin 17.5 mm circular bands for balanced power delivery
- Compatible with any Pathos reel for efficient line management
Available Sizes
The Laser Open Carbon is available in four different lengths to suit freediving and spearfishing needs:
- 90 cm
- 100 cm
- 110 cm
- 120 cm
These features make the Laser Open Carbon an ideal speargun for freediving and spearfishing, with an excellent balance of responsiveness, accuracy, and underwater comfort.
Laser Open Pro - Pathos
The Pathos Laser Open Pro is a band speargun designed for experienced spearfishers looking for maximum performance in a compact, lightweight weapon. Its Open Muzzle design makes it extremely hydrodynamic and easy to handle, while also providing a superior sight picture compared to traditional closed-muzzle spearguns.
Handle and Trigger Mechanism
The low-profile anatomical D'Angelo II Handle, in high-visibility white, is the result of studies derived from precision target pistols. The new stainless steel reverse trigger mechanism ensures a smooth, precise, friction-free Shaft release, adding 7 cm of extra loading length compared to traditional systems. Thanks to the open muzzle, with the same overall length, the Laser Open Pro delivers power equivalent to a speargun 10–14 cm longer.
- Shaped Handle in high-visibility white underwater
- Available in right-handed, left-handed, or universal versions
- Reverse trigger mechanism in stainless steel for maximum reliability
- +7 cm loading length compared to conventional systems
Barrel and Muzzle
The Barrel is made of fully anodized aluminum with a Ø 1.25 mm wall thickness. The surface is treated with a sharkskin coating integrated into the shaft guide, minimizing Shaft friction during the shot and improving grip during underwater tracking. The single-slot Open Muzzle allows two circular Bands to be mounted, with a recessed line release for a clean, hydrodynamic profile.
- Anodized aluminum Barrel Ø 1.25 mm with high rigidity
- Integrated shaft guide with anti-friction sharkskin coating
- Single-slot Open Muzzle for double circular Bands
- Recessed line release for an optimal hydrodynamic profile
- Integrated reel base
Standard Equipment
- Sandvik Shaft Ø 6.75 mm with shark fins, single barb, and tri-cut tip
- 2 black over amber circular Bands Ø 16.0 mm with Dyneema wishbone for exceptional power
- Starting from 120 cm length, the supplied Bands are XP type for even higher performance
- Standard loading pad
Technical Features
- Type: Open Muzzle band speargun
- Barrel: Anodized aluminum Ø 1.25 mm with sharkskin treatment
- Handle: Low-profile D'Angelo II – right-handed / left-handed / universal
- Mechanism: Reverse trigger in stainless steel
- Shaft: Sandvik Ø 6.75 mm, shark fins, tri-cut tip, single barb
- Bands: 2x Ø 16.0 mm black over amber with Dyneema wishbone (XP from 120 cm and up)
- Recommended use: Spearfishing – coastal and bluewater, for experienced spearfishers
Salvimar Metal Speargun for Freediving and Spearfishing
The Salvimar Metal is a band speargun designed to deliver agility and fast handling for spearfishing. The cylindrical barrel is made from aluminum alloy, a material that provides light weight and mechanical strength, while the integrated shaft guide increases the gun’s rigidity, improving accuracy and stability during tracking.
The trigger mechanism is made entirely of stainless steel, ensuring long-lasting durability and reliability in the underwater conditions typical of freediving.
Technical Features
- Double 14 mm circular bands for effective, adjustable power delivery
- Open Muzzle for easier band loading
- Dyneema Wishbones, hand-tied and known for its high strength and flexibility
- Reel included without line, for greater practicality in the water
- Standard Shaft calibrated to ensure accuracy and smooth shot release
- Available in seven lengths: 60, 75, 85, 95, 105, 115, and 125 cm, to suit different freediving and spearfishing needs
The balanced design and materials used promote efficient power transfer and high responsiveness, key factors for effective underwater performance.
Freediving Speargun Salvimar Metal Krypsis
Metal Krypsis is a speargun designed for spearfishing, featuring a cylindrical barrel made from aerospace-grade aluminum alloy, ensuring low weight and high mechanical strength. The integrated shaft guide increases structural rigidity, optimizing accuracy and maneuverability during aiming.
The camouflage finish on the barrel, applied through permanent sublimation, uses brown tones to ensure effective underwater concealment while spearfishing.
The anatomical handle is coated with acid green non-slip rubber, specifically designed to improve grip and make the product immediately recognizable among Salvimar equipment.
Release system and muzzle
The speargun is equipped with a metal release system featuring an adjustable Sensitive trigger, allowing the travel to be adjusted via a screw positioned on the handle, increasing control and practical customization of the trigger pull.
The open, reinforced enclosed track muzzle allows one or more bands to be installed, offering versatility in configuring shot power according to spearfishing needs.
Additional technical features
- 6.5 mm shaft with laser-welded shark fins to ensure durability and stability in power transfer
- Double 14 mm bands with Dyneema wishbones included as standard, ensuring an optimal balance between power and efficiency
- Available in 75 cm, 85 cm, 95 cm, 105 cm, and 115 cm lengths, to suit different spearfishing styles and personal preferences
Salvimar Metal Roller Roller Speargun
The Salvimar Metal Roller is a roller speargun with a cylindrical barrel made from aluminum alloy, designed to deliver maximum rigidity thanks to the full-length shaft guide. This structure helps improve stability and accuracy during tracking.
The release mechanism is made entirely from stainless steel, ensuring high mechanical strength and reliability even in marine environments.
Technical Features
- Double 16 mm circular band for powerful, controlled thrust
- Roller speargun muzzle for smooth, easy loading
- Hand-tied Dyneema wishbones for effective, long-lasting power transfer
- Standard shaft included, designed to optimize shooting accuracy
- Helper band with loading tool included to simplify loading the roller bands
Available Sizes
- 75 cm
- 85 cm
- 95 cm
- 105 cm
- 115 cm
Thanks to its agile, responsive design, the Salvimar Metal Roller is ideal for spearfishers looking for a rugged, accurate speargun capable of delivering high efficiency underwater.
Cressi Moicano – Speargun for Spearfishing
The Cressi Moicano is a speargun designed for spearfishing, combining a streamlined design with excellent maneuverability, making it suitable for quick, precise shots. Its construction is engineered to optimize smooth movement and practicality in the water.
Technical Features
- Barrel: made from anticorodal aluminum with a 26 mm diameter, offering strength and lightness—essential for easy tracking.
- Shaft guide: integrated and low-friction; the shaft rests only on the outer edges of the guide, reducing friction and improving shot accuracy.
- Muzzle: fully rounded with an integrated stainless steel line guide, allowing easy shaft repositioning and a clear sight line for intuitive aiming.
- Butt and handle: the butt is paired with a non-slip thermoplastic handle that improves grip in the water and ensures stability when lining up the shot.
- Loading pad: made from soft rubber and minimized to increase band efficiency and release speed.
- Color and camouflage: brown camu finish, specifically designed to blend effectively into Mediterranean and Atlantic environments, improving visual stealth.
- Length: available in the latest 85 cm version, ideal for a balance between maneuverability and propulsion power.
Benefits
The Cressi Moicano offers a combination of comfort and responsiveness thanks to carefully selected materials and its functional design. The ergonomic handle and non-slip butt ensure secure control even during dynamic dives, while the low-friction shaft guide supports smooth, precise power transmission.
These features make the Moicano particularly suitable for spearfishing in marine environments with variable visibility, where shot speed and accuracy are essential.
Mr. Carbon 2.0 C4 Speargun in High-Modulus Carbon Fiber
Mr. Carbon 2.0 is a monocoque speargun made entirely from high-modulus carbon fiber, designed to deliver light weight and excellent hydrodynamics. The design uses a cuttlefish-bone profile tapered toward the tip, with shapes and volumes engineered to provide perfect balance in the water and maximize maneuverability during spearfishing.
Technical Features and Design
- Compact Muzzle designed to reduce drag, improve accuracy, and optimize shaft trajectory control.
- Equipped with two line guides in AISI 316 stainless steel, one reversible for single- or double-band setups, ensuring pull parallel to the shaft for greater exit speed.
- Integrated shaft guide along the full length of the barrel to ensure stability and accuracy when tracking.
- “Auto-R” Trigger Mechanism in AISI 316 stainless steel with integrated line release, positionable on either side of the speargun to suit the user’s preference.
- CNC-machined stainless steel Trigger for reliability and long service life.
Comfort and Ergonomics
- Dual anatomical polypropylene handle, adjustable to adapt to different hand shapes and improve underwater grip.
- Butt pad with a soft plastic support, designed to increase comfort during extended dives.
- Dedicated mount for Hercules reels or the new C4 Vertical reels, attachable via threaded holes on the barrel, optimizing line management and making retrieval easier.
Equipment and Availability
- The speargun comes complete with a Tahitian shaft and C4 Grey Bull Primeline circular bands, selected to ensure efficient propulsion and mechanical resistance.
- Reels are sold separately to allow customization according to the spearfisher’s needs.
- Available in five lengths: 65 cm, 75 cm, 85 cm, 95 cm, and 105 cm.
- Compatible with shafts from 6.0 to 6.75 mm in diameter.
Technical Advantages
The high-modulus carbon fiber monocoque structure gives the Mr. Carbon 2.0 an exceptional combination of light weight and rigidity, improving finning responsiveness and fluid movement while freediving. The band configuration parallel to the shaft significantly increases shaft exit speed, improving penetration power when spearfishing. The dual adjustable handle and customizable Trigger Mechanism optimize control of the speargun both when aiming and during release.
Nemesis HT Roller-Inverter Speargun Sigalsub
The Nemesis HT is a Roller-Inverter speargun made by Sigalsub, a technical evolution of the Nemesis model. The barrel is made from Anticorodal aluminum alloy with a variable diameter from 28 to 26 mm, featuring an integrated shaft guide to ensure smooth travel and shooting accuracy.
Construction and materials
The muzzle is made from glass-filled nylon, a choice that combines lightness with mechanical strength. The compact design improves the overall balance of the speargun. To optimize line routing and smooth power transmission, the muzzle is equipped with two self-lubricating POM rollers rotating on stainless steel axles.
The release mechanism components and line release are made from stainless steel to ensure durability and reliability in the underwater environment.
Roller-Inverter propulsion system
The speargun uses a propulsion system with two or three pairs of Inverter bands, depending on barrel length:
- 76 cm and 82 cm spearguns use two pairs of bands.
- The 92 cm, 104 cm, and 116 cm sizes use three pairs of bands.
One pair of bands pre-tensions the line, ensuring reduced effort during loading. The bands are attached to two specially designed blocks made by SigalSub, consisting of metal plates, steel axles, and pulleys, which help distribute power evenly and contribute to reduced recoil.
Handle and components
The handle, derived from the Nemesis model, features an ergonomic structure with a non-slip thermorubber butt pad, ensuring comfort and control even with wet hands during spearfishing. The speargun is sold complete with SigalSub’s best components, including a 6.5 mm diameter HRC shaft and 16 mm Extreme bands, hand-tied for maximum reliability.
Technical specifications
- Barrel material: Anticorodal aluminum alloy
- Barrel diameter: 28/26 mm
- Muzzle: glass-filled nylon with self-lubricating POM rollers
- Release mechanism: stainless steel
- Bands: pairs of Inverter bands, 16 mm diameter
- Shaft: HRC, 6.5 mm diameter
- Available lengths: 76 cm, 82 cm, 92 cm, 104 cm, 116 cm
- Ergonomic handle with non-slip thermorubber butt pad
Sigalsub Nemesis HT Carbon
The Sigalsub Nemesis HT is an inverter speargun designed for spearfishing, featuring a high-power, long-range pulley reduction system, a compact structure, and precise load management thanks to components developed specifically by Sigalsub.
Inverter propulsion system
The propulsion system uses three pairs of 16 mm Sigalsub Extreme bands. Two pairs of straight bands are connected to the lower part of the handle, designed by Sigalsub from the outset with future evolution toward Roller Speargun and Inverter configurations in mind.
A third pair of bands is fixed laterally to the Barrel via two small supports perfectly integrated into the Nemesis profile. The three pairs of bands are connected to:
- two side pulleys
- two lines running toward the rollers in the Muzzle
- final fork closure
This configuration provides effective thrust management and greater range compared to traditional systems.
Compact Sigalsub Muzzle
The new compact Sigalsub Muzzle is made from glass-filled Nylon and is designed to keep weight low and dimensions extremely compact.
The structure features reinforced areas in the upper section and at the line passage points, increasing mechanical strength. The 8 mm steel central axle provides high transverse rigidity, while the thinner sections of the Muzzle reduce weight while maintaining good structural elasticity.
Self-lubricating POM rollers
The rollers are made from polyoxymethylene (POM), an engineering material used for precision components thanks to:
- high rigidity
- low friction
- excellent dimensional stability
The central spacer between axle and roller is also made from POM and is designed with increased clearance to keep the roller always free to rotate without friction against the side walls of the Muzzle.
Made in Italy pulleys
The Sigalsub pulleys are made in Italy and developed specifically for the Nemesis HT. They consist of:
- two steel plates
- steel axles removable via Allen screw
- POM roller for line running
Correct pulley positioning keeps alignment parallel to the Barrel, preventing rubbing and protecting the carbon from wear and scratches.
Carbon Barrel with integrated shaft track
The high-strength carbon Barrel integrates the shaft track to improve stability and accuracy during the shot. The structure is designed to manage the high stresses generated by the inverter system while maintaining good overall balance.
Loading procedure
Loading the Nemesis HT follows a specific procedure typical of inverter systems.
- The two pairs of lower bands are initially unhooked from the handle.
- The loop connected to the wishbone is pulled along the shaft until it hooks onto the desired shark fin tab.
- Next, the pairs of bands are progressively hooked under the handle.
- In the final configuration, the last pair uses the white line positioned above the reel.
The system is designed to simplify loading compared to traditional inverter configurations.
Available in lengths: 76 cm – 82 cm – 92 cm – 104 cm – 116 cm.
Sigalsub Nemesis Carbon One
The Sigalsub Nemesis Carbon One is a carbon speargun designed for spearfishing, featuring a compact structure, balanced trim, and a configuration engineered to ensure accuracy and smooth tracking.
Carbon Barrel with integrated shaft track
The barrel is made from glossy twill carbon fiber with a 28 mm outer diameter and 2 mm thick walls. The high-strength structure integrates the shaft track, improving shaft stability and smooth travel during the shot.
The setup includes:
- 17.5 mm Extreme single rubber band
- 6.5 mm Hole shaft or 6.75 mm Evolution, depending on barrel length
Available lengths: 64 - 72 - 76 - 82 - 92 - 104 - 116 cm.
Anatomical Handle and balance
The Sigalsub Nemesis Handle features a symmetrical anatomical design made from glass-filled Nylon. The non-slip Santoprene TPV coating improves grip even when used in the water and makes the Handle more visible on the seabed thanks to its white finish.
The configuration is designed for mounting Sigalsub reels in a rearward position, a solution that helps improve balance and tracking. The Nemesis Carbon One is also available with the Edy Carbon reel.
AISI 316 stainless steel Trigger Mechanism
The Trigger Mechanism is built entirely from AISI 316 stainless steel, including the housing and trigger. The rear-set system increases usable band stretch for the same speargun length.
The trigger also integrates a dual nylon cover with two different thicknesses to fit different hand sizes.
Compact Muzzle
The open Muzzle with single pass-through for a circular rubber band is made from glass-filled Nylon and designed with extremely compact, lightweight dimensions to promote practicality and maneuverability during spearfishing action.
Nemesis PRO Black - Modular Band-Powered Speargun
Nemesis PRO Black by Sigal Sub is a speargun designed for spearfishing, featuring a three-piece modular structure for easy handling in the water and during transport.
Technical Features
- Anticorodal aluminum alloy Barrel with variable 28/26 mm diameter, equipped with an integrated shaft guide for precise and consistent smoothness.
- Trigger Mechanism and line release made of stainless steel to ensure mechanical strength and long-term reliability.
- Open Muzzle compatible with single- or double-Band setups, allowing shooting power customization.
- Adjustable Trigger with extra-soft release system for precise control and a smooth Shaft release.
- Ergonomic Handle equipped with a white non-slip thermoplastic rubber butt pad, designed to ensure comfort and safety during aiming and tracking.
- Pre-configured for Roller Speargun systems both at the Reel mount and at the handle-barrel connection, making it easy to switch quickly between traditional propulsion with circular bands and a Roller Speargun system with no further modifications beyond changing the muzzle.
Components and Setup
The speargun is sold ready to fish with high-quality Sigal Sub components, including:
- Evolution Tahitian Shaft with 6.5 mm diameter for optimal thrust transfer.
- Double 14.5 mm Reactive rubber band, handmade and hand-tied to maximize responsiveness and efficiency.
- Reel positioned farther back to ensure smoother tracking and faster target alignment.
Variants and Construction Details
- Available in seven different lengths: 76 cm, 82 cm, 92 cm, 104 cm, 116 cm, 126 cm and 136 cm, to suit different spearfishing needs.
- Color: matte black to reduce visibility in the water.
Specific Benefits for Freediving and Spearfishing
The combination of durable materials such as Anticorodal aluminum and stainless steel, together with ergonomic and functional solutions such as the adjustable trigger and non-slip butt pad, ensures a balanced and reliable speargun. The option to mount Roller Speargun systems increases versatility, allowing the propulsion system to be adapted quickly according to the freediver’s preferences and fishing conditions.
Nemesis PRO Carbon - Modular Carbon Speargun for Spearfishing
Nemesis PRO Carbon is a band-powered Speargun, specifically designed for spearfishing. Made of three easily disassembled sections, this speargun stands out for its precise sight line and the lightness provided by the high-modulus carbon tube, which makes it easier to swing and improves efficiency in the water.
Construction and Materials
- High-modulus carbon Barrel with 30/26 mm diameter, delivering excellent mechanical properties and low weight.
- Integrated shaft guide to ensure a stable and precise shaft trajectory during propulsion.
- Trigger Mechanism and line release made of stainless steel, for strength and long-lasting durability in the marine environment.
Muzzle and Propulsion System
The open muzzle is designed to allow both single- and double-band configurations, adapting to different power and depth requirements.
The adjustable trigger with extra-soft release improves control sensitivity, promoting a smooth release and precise control during activation.
Handle and Versatility
- Ergonomic Handle with non-slip white thermorubber grip, ensuring comfort and stability during use.
- Provision for Roller Speargun systems at the reel mount and handle-barrel joint, allowing quick conversion from traditional band propulsion to Roller Speargun without additional modifications, except for replacing the muzzle.
Configuration and Components
The speargun comes ready for fishing, complete with high-quality Sigal Sub components:
- Tahitian Shaft in high-hardness, precision HRC steel.
- Double Extreme bands, 14.5/16.0 mm in diameter, hand-tied to ensure consistency and strength.
Available Sizes
Nemesis PRO Carbon is available in eight sizes to suit different spearfishing needs:
- 64 cm
- 76 cm
- 82 cm
- 92 cm
- 104 cm
- 116 cm
- 126 cm
- 136 cm
Main Technical Features
- Lightness and responsiveness provided by the carbon tube.
- Precision and aiming stability thanks to the integrated shaft guide and refined Trigger Mechanism.
- Non-slip thermorubber comfort for a better grip while freediving.
- High versatility with the option to easily switch from traditional band propulsion to a Roller Speargun system.
Freediving and Spearfishing Equipment
Explore the complete Deep Blue selection dedicated to freediving and spearfishing. On this page you’ll find the main products in our catalog: wetsuits, fins, masks, spearguns, knives, accessories, spare parts, and technical equipment for every experience level.
Every item is carefully selected to deliver reliability, comfort, and real performance in the water, from shallow-water spearfishing to more technical outings. An essential collection to quickly find what you need and complete your setup without getting lost among countless unnecessary products.
