Blades for Freediving fins

Dive-R Innegra Red-R Blades

The Dive-R Innegra Red-R blades are made with sophisticated Spread Tow technology, using Innegra fiber combined with high-quality carbon fibers. This innovative blend allows greater deformation than traditional carbon blades, ensuring superior absorption of impacts and mechanical stress, with exclusive water-repellent characteristics.

Available in two stiffness levels, Soft and Medium, these blades provide an efficient response adapted to different freediving and spearfishing styles, offering an optimal balance between elasticity and stiffness for smooth, responsive thrust transmission.

Materials and Technology

• Blend of special resins applied with high-level artisanal techniques
• Aerospace-grade fabrics composed of special fiberglass, premium carbon, carbon-copper, carbon-kevlar, and carbon-Innegra fibers
• Water-repellent structure with high mechanical resistance to ensure durability and consistent performance

This combination of materials reduces effort during finning, increasing efficiency and fluidity of movement underwater—essential characteristics for freedivers and spearfishers.

Assembly Recommendations

To fully take advantage of the capabilities of DiveR blades, we recommend mounting them on lightweight, low-profile foot pockets that do not limit freedom of movement and blade responsiveness, such as:

• C4 Foot Pockets
• Mares X-Wing with short side rails
• Imersion Foot Pockets, thanks to their softness, which effectively follows the flex of the blade

A blade/foot pocket assembly service is available for professional, optimal mounting.

Experience and Performance

The design of DiveR blades, developed and tested for over 15 years together with freediving and spearfishing professionals, is recognized for maintaining consistent performance over time, with no loss of power even after extended use. This product stands out for its ability to improve finning efficiency and significantly reduce muscle fatigue.

Variants and Customization

The blades are available in multiple colors and designs, offering customized solutions for different aesthetic and functional needs. Upon request, DiveR blades can be mounted on any type of foot pocket, always ensuring an optimal technical pairing.

Dive-R Innegra Carbon Blades

The Dive-R Innegra Carbon blades are made with advanced Spread Tow technology, incorporating Innegra fibers together with carbon to create a composite capable of greater deformation than traditional carbon blades. This high-tech material provides excellent impact resistance and natural water repellency, improving durability in the water.

Available in two stiffness options, Soft and Medium, they are designed to adapt to different freediving and spearfishing styles, optimizing thrust transmission and reducing muscle fatigue.

Recommended pairing with foot pockets

• Lightweight foot pockets with short side rails, such as C4 Foot Pockets and the Mares X-Wing, to fully take advantage of the blades’ responsiveness and efficiency.
• Foot pockets with long side rails, such as Imersion Foot Pockets, featuring excellent softness to follow the movement without compromising energy transfer.

A blade/foot pocket assembly service is available for professional fin assembly.

Materials and construction technology

DiveR blades are developed with a combination of high-quality resins and aerospace-grade fabrics, including a mix of special fibers such as fiberglass, carbon, copper, Kevlar, and Innegra. This makes it possible to achieve:

• High responsiveness and thrust transmission thanks to a calibrated elastic response
• Reduced muscle effort even during extended breath-hold sessions
• Optimal mechanical strength maintained over time with no loss of power
• Water repellency to maintain stable performance in the water

Testing and reliability

DiveR has tested this design with freediving and spearfishing professionals and enthusiasts for over 15 years, confirming the product’s technical superiority. Despite numerous imitations, no competitor has replicated the consistency of the original performance, which remains stable even after years of continuous use.

Customization and availability

DiveR blades are offered in multiple stiffness options and in a wide range of colors and designs, customizable to meet the specific needs of freedivers and spearfishers.

Assembly of DiveR blades on any type of foot pocket is available upon request.

Dive-R Innegra Red Blades: Cutting-Edge Technology and Materials

The Dive-R Innegra Red blades are made with an advanced blend of carbon fiber and Innegra fiber, using Spread Tow technology developed by the industry-leading company. This combination provides greater deformation capacity than traditional carbon blades, ensuring powerful, smooth thrust transmission.

Innegra fiber is designed to effectively absorb impacts and deformation, offering exceptional mechanical strength and water repellency. These features give the blades excellent durability in the water and optimal efficiency during finning.

Variants and Compatibility

• Available in Soft and Medium stiffnesses to suit different freediving and spearfishing styles.
• Recommended for mounting on lightweight foot pockets such as C4 Foot Pockets or Mares X-Wing with short rails, to fully take advantage of the blades’ responsiveness.
• Alternatively, the Imersion Foot Pockets provide excellent elasticity and comfort, following the movement without limiting efficiency.

For convenience, a blade and foot pocket assembly service is available and can be easily added to the cart.

Tested Design and Innovative Materials

DiveR developed this blade design in collaboration with freedivers and spearfishers, carrying out testing over more than 15 years. The result is a product recognized for its balance of power, smoothness, and reduced muscular effort.

The blades combine special resins and high-quality aerospace fabrics, including:

• Special fiberglass
• Premium carbon fibers
• Technical blends such as carbon and copper, carbon and Kevlar, and carbon with Innegra fiber

These materials ensure high responsiveness during finning, transmitting energy efficiently and reducing muscle fatigue even for those getting into freediving or spearfishing.

Durability and Consistent Performance

The Dive-R blades maintain their mechanical and thrust characteristics over time, with no loss of power after extended periods of use. This consistency is a crucial advantage in spearfishing and freediving, where equipment reliability is essential.

Customization and Mounting Options

The blades are available in different colors and designs, offering a wide range of aesthetic choices. Custom mounting is also available on any type of foot pocket with different profiles, made on request for a small surcharge. For more details, contact technical support.

To get the most out of the technical features of the DiveR Blades, we particularly recommend using them with the C4 400 Foot Pockets, featuring short rails and a lightweight design, ideal for maximizing thrust transmission efficiency.

Blades Dive-R Innegra Carbon

The Blades Dive-R Innegra Carbon are made with innovative Spread Tow technology using Innegra fiber, a composite material that combines carbon fibers and Innegra to give the fin greater flex deformation than traditional carbon blades.

This high-tech fiber is designed to absorb impacts and deformation to a greater extent than other materials, while also providing water-repellent properties that are essential in the underwater environment. The blades are available in two stiffnesses: Soft and Medium, allowing you to choose the rigidity best suited to your spearfishing or freediving style.

Materials and construction

• Blend of resins and aerospace-grade fabrics specifically combined to maximize responsiveness and lightness
• Special fiber composition: premium carbon, high-performance fiberglass, carbon and copper combinations, carbon and Kevlar, and carbon with Innegra
• Optimized thrust transmission and reduced muscle effort during finning

Compatibility and recommended assembly

To take full advantage of the blades’ responsiveness and precision, installation on lightweight foot pockets with short rails is recommended, such as Foot Pockets C4 or Mares X-Wing. Alternatively, the Foot Pockets Imersion are also suitable, as their high flexibility follows the movement of the blades without limiting hydrodynamic efficiency.

A professional blade-to-foot-pocket assembly service is available through the following Blades / Foot Pockets assembly link.

Performance and reliability

The Dive-R blade design, developed and tested for over 15 years in collaboration with freediving and spearfishing professionals, ensures consistent power transfer with no loss of effectiveness over time. The combination of high-performance materials provides smooth finning and efficient thrust transmission, reducing fatigue and improving underwater control.

Compared to other similar products, Dive-R blades maintain their stiffness and responsiveness after extended use, with no weakening or decline in mechanical performance. Available in multiple color and design variants, they combine functionality and customization for an optimal underwater experience.

Additional information

Note: Dive-R blades can be mounted on any type of foot pocket upon request.

Blades Pathos Carbon Pro Ultimate

The Pro Ultimate are blades made entirely from carbon fiber, designed to provide high mechanical strength and perfect reactivity during finning in freediving and spearfishing.

Construction and Materials

The blade features a double carbon weave with specific characteristics:

• Outer layer in 285-T4 4x4 weave, which fully absorbs the protective resin, increasing breakage resistance.
• Inner layer in 285-T2 2x2 twill weave, which increases the reactivity of the blade, improving thrust transmission during finning.

Design and Hydrodynamic Efficiency

• Glossy blade surface with low, consistent water rails to reduce drag in the water and optimize fluidity.
• The tip with a convex flap increases power in the final phase of the fin stroke, reducing leg load and helping conserve energy underwater.
• 28º blade angle designed for an ideal balance between power and control in underwater movement.

Stiffness Variants

Available in three stiffness levels to adapt to different elasticity and thrust requirements during spearfishing:

• Soft
• Medium
• Hard

Dive-R Innegra Red Blades - Short: advanced structure and materials for freediving and spearfishing

The Dive-R Innegra Red Blades - Short are made with cutting-edge Innegra fiber technology, an innovative blend of carbon fiber and Innegra. This composition allows the blades to achieve greater controlled deformation than traditional carbon fins, increasing mechanical strength and impact absorption without compromising thrust transmission in the water. Innegra fiber, naturally water-repellent, improves durability and reliability during dives.

Composite materials and proven design

The blades are built with an expert mix of specific resins and aerospace-grade fabrics, including special fiberglass, premium carbon, copper, kevlar, and Innegra. These materials give the blades:

• High responsiveness and efficient fin-stroke power transfer
• Minimized muscular effort thanks to mechanical optimization
• Consistent performance over time without degradation

Optimized for different freediving and spearfishing styles

Available in different stiffness options (Soft and Medium), the Dive-R blades adapt to various diving styles and personal preferences. Choosing the right foot pocket is essential to fully exploit the dynamic characteristics of these blades. We recommend mounting them on lightweight foot pockets with short rails, such as C4 Foot Pockets or Mares X-Wing, which ensure freedom of movement and smooth power transfer. Alternatively, the particularly soft Imersion Foot Pockets effectively follow the flex of the blades without limiting efficiency.

Additional services and customization

A professional blade-mounting service is available for any foot pocket through the dedicated assembly option, ensuring an optimal technical and ergonomic fit. Custom rails can be installed on request to further tailor the hydrodynamic behavior of the blades according to the specific needs of the freediver or spearfisher.

Dive-R Innegra V2 Blades for Freediving and Spearfishing

The Dive-R Innegra V2 Blades are made with advanced Spread Tow technology, integrating carbon and Innegra fibers, a high-performance, water-repellent material. This blend allows greater deformation than traditional carbon fins, offering improved impact absorption and superior durability, ideal for freediving and spearfishing use.

The blades are available in two stiffness options, Soft and Medium, to suit different diving styles and ensure effective thrust transfer during the kick cycle.

Materials and Construction

• Premium carbon fibers combined with innovative materials such as Innegra fibers, Kevlar and copper
• Aerospace-grade resins expertly applied for a strong, lightweight structure
• Special fabrics with high capacity to absorb saturation and mechanical loads

These technical features ensure a blade with a shape and structure that remain stable over time, without losing power even after long periods of use, ensuring smoothness and efficiency in the water.

Mounting Recommendations

To take full advantage of the technical characteristics of the Dive-R Innegra V2 Blades, mounting them on lightweight foot pockets with short side rails is recommended, such as:

• C4 Foot Pockets
• Mares X-Wing

Alternatively, for those using long side rails, Imersion Foot Pockets are recommended, thanks to their softness, which follows the movement of the blade without limiting its efficiency.

Assembly Service

A dedicated Blade / Foot Pocket Assembly service is available for professional, optimized mounting.

Performance and Durability

DiveR, supported by testing with freediving and spearfishing professionals, has developed these blades to ensure reduced muscle effort and greater efficiency in thrust transfer. The combination of materials and design increases mechanical performance without sacrificing comfort and mechanical strength, key elements for freediving.

DiveR Blades are recognized on the market for their reliability, long-term durability, and variety of designs and colors, making them a distinctive, highly specialized product for freediving and spearfishing enthusiasts.

Custom mounting: on request, DiveR Blades can be mounted on any foot pocket model.

Dive-R Ultra Carbon Blades for Freediving and Spearfishing

The Dive-R Blades in Ultra Carbon are an Australian-made product manufactured with rigorous construction techniques, designed to deliver quality, precision, and durability for freediving and spearfishing.

These fins are used internationally by spearfishers and freedivers with high technical standards, capable of withstanding significant mechanical stress underwater while maintaining consistently high performance over time.

Materials and Construction Technologies

The DiveR carbon blades are made with premium-grade carbon fibers combined with selected resins to ensure superior elastic rebound and efficient power transfer. The special Spread Tow weave—a “wide weave”—helps minimize energy loss, optimizing every fin stroke.

They are available in two distinct stiffness levels, Soft and Medium, to suit different finning styles and effort levels.

Compatibility and Assembly

To fully exploit the qualities of the DiveR blades, mounting them on lightweight foot pockets with short rails is recommended, such as C4 Foot Pockets or the Mares X-Wing.

Alternatively, the Imersion Foot Pockets provide excellent softness, following the movement of the fin without limiting thrust-delivery efficiency.

A dedicated blade/foot pocket assembly service is also available for an optimal, customized setup.

Innovation and Composite Materials

DiveR developed this model by combining aerospace materials and advanced composites such as carbon and copper blends, carbon and Kevlar, or carbon and Innegra fibers. These technical solutions improve mechanical strength, lightness, and finning fluidity with greatly reduced muscular effort.

The result is an extremely precise and responsive blade, capable of maintaining performance over time without any loss of effectiveness, even after prolonged use while freediving.

Customization and Durability

• Wide range of colors and designs to customize the setup according to technical and aesthetic preferences.
• Original power and stiffness retention guaranteed for over 8 years of production, with no reported structural degradation.
• Suitable for both experienced freedivers and those looking for a high-quality technical product for spearfishing.
• Assembly available on any foot pocket model upon request, to maximize compatibility and comfort.

Single Blade Umberto Pelizzari - Ghost

The Ghost single blade, by Umberto Pelizzari, is designed specifically for freediving and spearfishing. Available in Medium - 30 stiffness, it provides an optimal balance between flexibility and rigidity for an efficient, responsive fin stroke.

This blade delivers balanced thrust transmission, ensuring smooth movement that reduces fatigue during extended dives. The design is engineered to maximize hydrodynamics, improving control and precision during underwater propulsion.

Blade Gara Impulse - Blue Metal

The Impulse Blue Metal Blade is designed to deliver high performance in finning during freediving and spearfishing. Ideal for freedivers of all experience levels, it features a thin, lightweight blade with a swallowtail design, optimized to improve directionality in the water and thrust transmission.

The blade is equipped with non-slip side rails that reduce lateral water spill, thereby increasing propulsive efficiency. The 29-degree flex angle ensures an optimal balance between maximum performance and minimal energy expenditure. The structure is engineered to provide high impact resistance, helping prevent accidental breakage during use.

Technical Features

• Blade material: plastic polymer
• Swallowtail design to improve directionality and thrust
• Non-slip side rails to reduce lateral water loss
• Flex angle: 29° for propulsive efficiency
• High mechanical impact resistance
• Self-adjusting Gara Modular Foot Pockets in thermorubber
• 2 cm Self-Adjusting elastic band for an ergonomic fit
• Available in two colors: Black and Blue Metal
  

Gara Impulse Blade - Black

The Impulse Black Blade is designed to deliver high performance during finning for freediving and spearfishing. Ideal for freedivers of all experience levels, it features a thin, lightweight blade with a swallowtail design, optimized to improve directional control in the water and thrust transmission.

The blade is equipped with non-slip side rails that reduce lateral water spill, increasing propulsive efficiency. The 29-degree flex angle ensures an optimal balance between maximum output and minimal energy expenditure. The structure is engineered to provide high impact resistance, preventing accidental breakage during use.

Technical Features

• Blade material: plastic polymer
• Swallowtail design to improve directional control and thrust
• Non-slip side rails to reduce lateral water loss
• Flex angle: 29° for propulsive efficiency
• High mechanical impact resistance
• Gara Modular self-adjusting Foot Pockets in thermoplastic rubber
• 2 cm Self-Adjusting elastic band for ergonomic fit
• Available in two colors: Black and Metallic Blue
  

Cetma Mantra Blades - Carbon 

The Mantra blades are the flagship model from Cetma Composites, specifically designed for freedivers and spearfishers who demand high-level technical equipment. Made entirely from 100% Pre-preg carbon, the blades are built using an exclusive hot-melt impregnation technology with tetra-functional resin, applied under high pressure, high temperature, and vacuum conditions. This process ensures a defect-free blade, with a consistent fiber/resin ratio across the entire surface.

Design and Technical Features

The engineered distribution of stiffness and mass in the blade allows its natural frequency to be tuned to the finning frequency range, leveraging resonance to optimize thrust transfer and responsiveness. This advanced design improves the fluidity and efficiency of the fin stroke during freediving and spearfishing.

Constant-section water rails with a height of 10 mm, designed to improve hydrodynamic grip and stability in the water.

Available Variants

• Stiffnesses: 20 super soft, 25 soft, 30 medium, allowing a calibrated choice based on finning style and the required stiffness level.
  
• Blade dimensions: 742 x 195 mm, sized to ensure an effective balance between thrust and maneuverability.
• Available graphics: gold, white, magenta.

Prana Blades - Cetma Composites

The Prana Blades are an advanced model specifically designed for freedivers and spearfishers who demand uncompromising equipment in terms of quality and materials.

Materials and Construction

The blades are made of 75% carbon and 25% S-Glass, a high-strength fiberglass derived from the aerospace industry. Manufacturing involves an exclusive high-pressure, high-temperature vacuum process, with hot-melt impregnation using tetra-functional resin. This method ensures a defect-free component with a consistent fiber/resin ratio along the entire blade, providing strength and lightness.

Engineered Design for Efficient Kicking

The calibrated distribution of stiffness and mass along the blade promotes resonance within a range of natural frequencies that match the typical kicking frequency. This configuration optimizes thrust transmission, reducing fatigue and increasing the fluidity of movement underwater.

Water rails: constant-profile structure with a height of 10 mm, designed for optimal stability and trim control.

Blade dimensions: 667 x 185 mm, balanced to ensure efficient propulsion.

Variants

• Stiffness options: 25 soft and 30 medium to suit different thrust and kicking requirements.
  
• Logo and stringer colors:  red, orange, and yellow.

Applications

The Prana blades are specifically designed to improve reactivity and hydrodynamic efficiency during spearfishing and freediving, making the kick smoother and less tiring even during extended sessions.

Cetma Mantra Blades - Carbon 

The Mantra blades are the flagship model from Cetma Composites, specifically designed for freedivers and spearfishers who demand high-level technical equipment. Made entirely from 100% Pre-preg carbon, the blades are manufactured using an exclusive hot-melt impregnation technology with tetra-functional resin, applied under high pressure, high temperature, and vacuum conditions. This process ensures a defect-free blade with a consistent fiber/resin ratio across the entire surface.

Design and Technical Features

The engineered distribution of stiffness and mass in the blade allows its natural frequency to be tuned to the finning frequency range, leveraging resonance to optimize thrust transmission and responsiveness. This advanced design improves the smoothness and efficiency of the fin stroke during freediving and spearfishing.

Constant-section water rails with a height of 10 mm, designed to improve hydrodynamic grip and stability in the water.

Available Variants

• Stiffnesses: 20 super soft, 25 soft, 30 medium, allowing a calibrated choice based on finning style and the required stiffness level.
  
• Blade dimensions: 742 x 195 mm, sized to ensure an effective balance between thrust and maneuverability.
• Available graphics: gold, white, magenta.

Prana Blades - Cetma Composites

The Prana Blades are an advanced model specifically designed for freedivers and spearfishers who demand uncompromising equipment in terms of quality and materials.

Materials and Construction

The blades are made of 75% carbon and 25% S-Glass, a high-strength fiberglass derived from the aerospace industry. Manufacturing involves an exclusive high-pressure, high-temperature, vacuum process, with hot-melt impregnation using tetra-functional resin. This method ensures a defect-free component with a consistent fiber/resin ratio along the entire blade, delivering strength and lightness.

Engineered Design for Efficient Finning

The calibrated distribution of stiffness and mass along the blade promotes resonance within a range of natural frequencies that match the typical finning frequency. This configuration optimizes thrust transmission, reducing fatigue and increasing the fluidity of underwater movement.

Water rails: constant-profile structure with a height of 10 mm, designed for optimal stability and control of trim.

Blade size: 667 x 185 mm, balanced to ensure efficient propulsion.

Variants

• Stiffness options: 25 soft and 30 medium to suit different thrust and finning requirements.
  
• Logo and stringer colors:  red, orange, and yellow.

Applications

The Prana blades are specifically designed to improve responsiveness and hydrodynamic efficiency during spearfishing and freediving, making finning smoother and less tiring even during extended sessions.

Cetma Mantra Blades - Carbon

The Mantra blades are the flagship model from Cetma Composites, specifically designed for freedivers and spearfishers who demand high-level technical equipment. Made entirely from 100% pre-preg carbon, the blades are built using an exclusive hot-melt impregnation technology with tetra-functional resin, applied under high pressure, high temperature, and vacuum conditions. This process ensures a defect-free blade, with a consistent fiber/resin ratio across the entire surface.

Design and Technical Features

The engineered distribution of stiffness and mass in the blade allows its natural frequency to be tuned to the finning frequency range, leveraging resonance to optimize thrust transmission and responsiveness. This advanced design improves the smoothness and efficiency of the kick during freediving and spearfishing.

Constant-section water rails with a height of 10 mm, designed to improve hydrodynamic tracking and stability in the water.

Available Variants

• Stiffness options: 20 super soft, 25 soft, 30 medium, allowing a calibrated choice based on kick style and required stiffness level.
  
• Blade dimensions: 742 x 195 mm, sized to provide an effective balance between thrust and maneuverability.
• Available graphics: gold, white, magenta.

Prana Blades - Cetma Composites

The Prana Blades are an advanced model specifically designed for freedivers and spearfishers who demand uncompromising equipment in terms of quality and materials.

Materials and Construction

The blades are made of 75% carbon and 25% S-Glass, a high-strength fiberglass derived from the aerospace industry. Production involves an exclusive high-pressure, high-temperature vacuum process, with hot-melt impregnation using tetra-functional resin. This method ensures a defect-free component with a consistent fiber/resin ratio along the entire blade, delivering strength and lightness.

Engineered Design for Efficient Finning

The calibrated distribution of stiffness and mass along the blade promotes resonance within a range of natural frequencies that match the typical finning frequency. This configuration optimizes thrust transmission, reducing fatigue and increasing the fluidity of movement underwater.

Water rails: constant-profile structure with a height of 10 mm, designed for optimal stability and trim control.

Blade size: 667 x 185 mm, balanced to ensure efficient propulsion.

Variants

• Stiffness levels: 25 soft and 30 medium to suit different thrust and finning requirements.
  
• Logo and stringer colors:  red, orange, and yellow.

Applications

Prana blades are specifically designed to improve reactivity and hydrodynamic efficiency during spearfishing and freediving, making finning smoother and less tiring even during extended sessions.

Cetma Lotus Plastic Blades

The Cetma Lotus blades are designed for freediving, spearfishing, and pool training, offering an ideal balance of durability, responsiveness, and versatility. Made from a fiber-reinforced polymer composite, the blades provide elastic rebound similar to fiber blades, ensuring effective, smooth thrust throughout the fin stroke.

Technical Features

• Blades made from reinforced polymer composite for greater mechanical resistance to impacts and wear
• Excellent elastic rebound similar to fiber blades for efficient thrust transmission
• Blade dimensions: 650 x 185 mm

Applications

Lotus fins are suitable for freediving, spearfishing, and pool training sessions, thanks to their ability to combine durability and smooth finning even under intensive use conditions.

Fast HD Carbon Blade

The H. Dessault Fast HD is a lightweight and durable carbon blade, designed to deliver efficiency and comfort in all types of spearfishing. Made with Japanese T700 Superforce carbon, it ensures high elasticity and superior mechanical strength—essential features for a smooth, effective fin stroke.

Technical Features

• Blade length: 86 cm, providing a larger thrust surface and optimal power transfer during freediving
• Stiffness available in three options: 25 Soft, 30 Medium, and 40 Hard, to suit different needs
  
• Elastic-K10 black water rails to improve tracking and stability in the water
• Weight starting from 700 grams, ensuring lightness and agility
  

Benefits for Spearfishing

The combination of T700 carbon with the rail-free foot pocket and Elastic-K10 water rail structure gives the Fast HD outstanding hydrodynamic efficiency and lightness, improving the fluidity and precision of the fin stroke. This reduces the effort required and allows the spearfisher to maintain a more natural posture and greater bottom time.

Applications

The Fast HD fins are suitable for spearfishing and freediving, offering an optimal balance of power and comfort. The range of available stiffnesses lets you choose the most suitable blade based on the spearfisher’s profile and the intensity of the fin stroke required.

Minimal HD Blade - H Dessault

The Minimal HD blade by H Dessault combines compact dimensions with T300 carbon, offering an ideal technical solution for those starting to use carbon fins for freediving and spearfishing.

Technical Features

• Material: fine twill-weave T300 carbon, providing an excellent balance between lightness and mechanical strength
• Blade dimensions: 780 x 190 mm, optimized for effective thrust transmission
• Blade Stiffness: single stiffness (30 - Medium), for balanced responsiveness and efficient kicking
• Water rails: Elastic-K10 black, for improved hydrodynamics and water-flow stability
• Weight: 650 grams, ensuring comfort and ease of use even during extended sessions

Applications and Benefits

The Minimal HD blades are designed to offer a simple, lightweight, and effective product, especially suited to anyone looking for a first step into carbon fins. Ideal for freediving and spearfishing sessions, they ensure good power transmission and a solid balance between comfort and control.

T300 Carbon Tank HD Blade for Spearfishing

The Tank HD blade is specifically designed for spearfishing, combining lightness, strength, and maneuverability in a highly technical product. Made from 100% T300 carbon fiber, it integrates the new O.P.S system developed by C4 Technology, which allows the thermorubber to be directly overmolded onto the carbon surface, with no need for adhesives. This innovative process provides long-lasting protection and greater mechanical resistance at the tip of the Blade.

The rubber protection on the tip of the Blade is designed for use when spearfishing in whitewater, shallow water, or ambush hunting, significantly reducing the noise generated by the fin stroke and improving fluidity of movement in the water.

Technical Features

• Material: T300 carbon fiber
• Blade size: 700 x 190 mm
• Blade Stiffness: 30 medium, balanced for efficient thrust and control
• Water rails: continuous, to optimize stability and directional control
• Overall weight: 700 grams, ensuring excellent lightness
• Foot Pocket compatible: H Dessault model 350, also compatible with C4 250 foot pocket

Performance and Applications

The fins are designed to deliver an agile, responsive fin stroke, with compact dimensions that make quick direction changes easier, as required in spearfishing. Impact resistance, provided by the overmolded rubber protection, ensures durability even when used in shallow water or among rocks during ambush hunting.

The combination of T300 carbon and the O.P.S system contributes to an excellent stiffness-to-flexibility ratio, optimizing thrust transfer and reducing fatigue during spearfishing sessions.

Pershing HD Fins in T300 Carbon Fiber

The Pershing HD blade is designed specifically for spearfishing and freediving, combining lightness, mechanical strength, and easy handling. Made entirely from T300 carbon fiber, it ensures efficient power transfer and a smooth, responsive fin stroke, even during prolonged use.

Technical Features and Materials

• Material: 100% high-strength T300 carbon fiber
• Blade dimensions: 800x190 mm, optimized for a balance of power and agility
• Blade Stiffness available in two versions: 25 (soft) and 30 (medium)
• Constant-section water rails to improve hydrodynamic stability during the fin stroke
• Fin weight: 650 g, with balance engineered to reduce fatigue
• Compatible with C4 250 and HD 350 foot pockets

Innovation and User Comfort

The main distinctive feature of the Pershing HD is the O.P.S system developed by C4 Technology, which allows direct overmolding of thermorubber onto the carbon without the use of adhesives. This patented process provides robust protection for the blade tip, shielding it from impacts and improving the quietness of the fin stroke by reducing noise in the water — a key factor in spearfishing to avoid spooking marine life.

The blade configuration and choice of materials ensure excellent responsiveness during sudden changes of direction, making these fins ideal wherever agility and impact resistance are essential.

Applications

The Pershing HD blades are designed for freedivers and spearfishers who need reliable equipment with a strong balance between lightness and durability. The rubber tip protection and advanced construction system ensure long-lasting performance and comfort during extended sessions at sea.

HD Maxx Plastic Blade - H. Dessault

The HD Maxx blade is designed specifically for the needs of freedivers and spearfishers, combining advanced materials with a functional design to ensure efficiency and comfort in the water.

Materials and Construction

The blade is made from a soft hardness polymer compound, providing optimal flexibility combined with high elastic rebound, reducing effort during finning. This combination also delivers high breakage resistance, ensuring durability and reliability even during extended use.

Applications

The HD Maxx blades are ideal for both spearfishing and freediving, offering an effective balance between blade responsiveness, comfort, and mechanical strength. The blade’s light weight and elasticity optimize finning fluidity, making long sessions easier with less fatigue.

X-Wing Pro Blade - Mares

The X-Wing Pro Blade is designed for freedivers seeking the perfect balance of agility, power, and control. Made from high-quality elastomer, this tapered blade delivers a smooth, efficient kick, perfectly adapting to the needs of those practicing high-level freediving and spearfishing.

Design and Technology

The tapered profile of the blade is not just aesthetic: it is the result of a precise technical choice. The variable thickness allows flex to be optimally distributed along the entire blade, ensuring high finning performance without sacrificing maneuverability or effective length.

Technical Features

• Material: high-quality elastomer, durable and high-performance
• Tapered profile with variable thickness for maximum hydrodynamic efficiency
• V-tip for a more stable kick and to eliminate lateral water slippage
• Large load-bearing surface for powerful thrust with every fin stroke

Dimensional Specifications

• Blade width: 19.0 cm
• Blade length: 71.3 cm (713 mm)

Why Choose the X-Wing Pro

The X-Wing Pro elastomer blade is the ideal choice for those who want a responsive, stable, high-performance fin. The V-tip reduces lateral water dispersion, translating every movement into direct, precise thrust. Ideal for freediving and spearfishing sessions where agility and control make the difference.

X-Wing Blade - Mares

The Mares X-Wing blade is a high-level technical solution for freedivers looking for the perfect balance of agility, power, and control in the water. Made from high-quality elastomer, this blade is designed to deliver a smooth, stable, and high-performance fin stroke, adapting to the needs of those practicing freediving and spearfishing at every level.

Tapered Design and Variable Thickness

The tapered profile of the blade helps reduce water resistance during the fin stroke, promoting more agile and efficient movement. The variable thickness is one of the key elements of this design: it optimizes flex along the full length of the blade, delivering high propulsive performance without sacrificing maneuverability. The result is a blade that responds precisely and naturally to every leg kick.

V-Shaped Tip for Greater Stability

The distinctive V-shaped tip is specifically designed to ensure a more stable and directional fin stroke. This geometry reduces lateral water slippage, improving propulsive efficiency and movement precision—essential in hunting situations or during deep freedives.

Technical Features

• Material: high-quality elastomer
• Blade length: 713 mm
• Blade width: 190 mm
• Thickness: variable along the entire blade
• Tip: V-shaped design to prevent lateral slippage
• Flexibility: 30% softer than the Razor Pro model

Blades PULSE - Cetma Composites

The PULSE carbon blades by Cetma Composites are a true revolution in the world of spearfishing and water training. Designed and manufactured 100% Made in Italy, the PULSE introduce the Hyperbolic Curve: an exclusive geometry that delivers maximum thrust with minimal effort, redefining the concept of responsiveness for high-performance carbon blades.

Technology and Materials

The PULSE blades are built with a selection of aerospace-derived composite materials, chosen to ensure maximum hydrodynamic efficiency and the highest structural reliability in all conditions of use.

• 100% HM (High Modulus) and HR (High Resistance) Carbon: the optimal combination of stiffness and toughness for a blade that is responsive, reactive, and virtually indestructible.
• Hot Melt Pre-preg: the composite material is impregnated with hot-melt systems using high-performance resin, ensuring a consistent and optimal fiber/resin ratio across the entire blade surface.
• OOT Technology – Out-of-Autoclave Technology: an exclusive Cetma Composites production process that achieves the same quality standards as the aerospace industry without the use of an autoclave, optimizing control over the composite curing process.

ZDF Excellence – Zero Defects

The PULSE blades are produced with Cetma Composites’ proprietary ZDF (Zero Defects) technology. This aerospace-derived production standard ensures a component with 0% internal voids, free from structural defects and with a perfectly consistent fiber/resin ratio throughout the blade. The result is a blade that maintains its original mechanical characteristics over time, with no performance degradation.

FEM-Optimized Design

The geometry of the PULSE blades is the result of advanced design using finite element analysis (FEM – Finite Element Method). The structural simulation software used by Cetma Composites ensures optimal stiffness distribution, in order to reproduce a blade deformation profile that maximizes hydrodynamic efficiency during finning, both vertically and horizontally.

The Hyperbolic Revolution

The defining feature of the PULSE blades is the Hyperbolic Curve: a patented geometry that sets these blades apart from any other product currently on the market. Thanks to this shape, the blade delivers a unique biomechanical response, with instant responsiveness and powerful thrust from the very first kick. Ideal for spearfishing and intensive training sessions, the PULSE are designed for those seeking maximum performance without compromise.

Main Features

• Exclusive Hyperbolic Curve: maximum thrust with minimal effort
• 100% HM + HR Carbon: high elastic modulus and high mechanical strength
• Hot Melt Pre-preg: hot-melt impregnation for superior composite quality
• OOT Technology (Out-of-Autoclave): exclusive Cetma Composites aerospace production process
• ZDF Excellence – Zero Defects: 0% voids, defects, and structural discontinuities
• FEM Design: advanced finite element design for optimal hydrodynamic efficiency
• 100% Made in Italy
• Ideal for spearfishing and training

Sigalsub Tsunami Carbon Blades

The Sigalsub Tsunami are carbon blades designed for freediving and spearfishing, developed to deliver a smooth, progressive, and responsive fin stroke with a good balance between thrust and comfort.

Made from T700 12K Prepreg carbon fiber, they ensure consistent elastic response and efficient thrust transfer, helping reduce leg fatigue even during extended sessions.

The 23° blade-to-foot pocket angle promotes a more natural fin stroke and improves hydrodynamics during descent and ascent.

The reduced side rails allow the blade to work more freely and progressively, increasing flexibility and sensitivity while making the most of carbon’s elastic properties.

Sigalsub Tsunami blades are available in the following stiffnesses:

• Super Soft
• Soft
• Medium

This configuration lets you choose the blade response based on your finning technique and your freediving and spearfishing needs.

C4 MB002 Single Blade for Freediving and Spearfishing

The C4 MB002 single blade is designed specifically for freediving and spearfishing, delivering highly effective thrust transmission. Made with durable materials, it ensures long-lasting performance and mechanical strength even with frequent dives.

Thanks to its design, engineered to optimize fluid movement, the blade improves responsiveness and efficiency during finning, minimizing muscle fatigue. Advanced hydrodynamics provide smoother, more controlled thrust during descent and ascent phases.

The C4 MB002 blade combines lightness and strength, essential features for ensuring comfort and precision in underwater movements without compromising the power needed for freediving dives.

Dive-R Carbon Copper Blades for Freediving and Spearfishing

The Dive-R Blades in Carbon Copper are made with carbon fiber integrated with copper, offering approximately 15% greater lightness compared to traditional DiveR carbon blades. This advanced material delivers a snappier, more efficient kick, optimizing thrust transmission and reducing muscle fatigue during freediving and spearfishing.

Available in two different stiffnesses, Soft and Medium, the blades adapt to different freediving needs and spearfishing styles.

Assembly and Compatibility

To fully take advantage of the hydrodynamic qualities and responsiveness of the Dive-R blades, we recommend mounting them on lightweight foot pockets with short side rails, such as C4 Foot Pockets or Mares X-Wing. Alternatively, using the Imersion Foot Pockets, thanks to their high softness, allows for a smoother blade movement without compromising thrust transmission efficiency.

You can add the Blade / Foot Pocket Assembly service directly to your cart for a customized professional installation.

Innovative Materials and Construction

DiveR blades are the result of over 15 years of development together with freedivers and spearfishers, using combinations of advanced resins and aerospace fabrics. The composition includes special fiberglass, premium-grade carbon combined with copper, Kevlar, or Innegra fibers, ensuring an excellent balance between light weight and mechanical strength.

This composite structure ensures:

• High responsiveness and smoothness during the kick
• Reduced muscle effort while maintaining consistent power even after prolonged use
• Durability with no loss of performance over time

Technical Features and Benefits

• Carbon Copper material, exclusive and sophisticated
• Available in two stiffnesses to suit different freediving and spearfishing styles
• Customizable mounting on any foot pocket to optimize comfort and efficiency
• Wide range of colors and designs for technical and aesthetic customization

Dive-R Blades are recognized as one of the most effective products on the market for freediving and spearfishing, thanks to careful materials research and the technical balance between light weight, responsiveness, and mechanical strength—key elements for efficient and comfortable diving.

Dive-R Carbon Blades for Freediving and Spearfishing

The Dive-R Carbon Blades are made entirely in Australia using rigorous manufacturing techniques to ensure quality, precision, and reliability in every detail. These fins have been developed to meet the specific needs of the most experienced freedivers and spearfishers, delivering strength and durability in demanding underwater environments.

Materials and Structure

The blade construction uses top-grade carbon fibers combined with high-quality resins that ensure optimal elastic rebound. Advanced materials are used, such as:

• Special fiberglass
• Innovative blends of carbon and copper, carbon and Kevlar, carbon and Innegra fibers

This combination gives the blades excellent mechanical strength, light weight, and durability even under continuous stress, maintaining their characteristics unchanged over time.

Efficiency and Comfort in the Water

Dive-R blades reduce muscle effort thanks to superior elastic rebound and efficient thrust transmission, improving the smoothness and responsiveness of the fin stroke during freediving and spearfishing. Available in two stiffnesses, Soft and Medium, they allow you to adapt rigidity to different diving techniques.

Compatibility and Assembly

To fully benefit from the technical features of the Dive-R Blades, installation on lightweight foot pockets is recommended, such as the C4 Foot Pockets or the Mares X-Wing with short rails. The foot pocket design directly affects thrust transmission efficiency and comfort.

Alternatively, for those who prefer long rails, the Imersion Foot Pockets are recommended, as their softness smoothly supports the movement of the blades without compromising efficiency.

A dedicated blade and foot pocket assembly service is also available for optimal, professional installation.

Durability and Performance Guarantee

After more than 15 years of testing and continuous development, Dive-R Blades retain their performance characteristics without visible degradation after intensive use in freediving and spearfishing. Their design and innovative materials ensure consistent stiffness and responsiveness over time, setting them apart from other similar products on the market.

Customization and Options

Dive-R Blades are available in a wide range of colors and designs, allowing every freediver to choose the option best suited to their technical and aesthetic needs. The blades can be mounted on any type of foot pocket, further customizing the spearfishing and recreational freediving experience.

Pathos Pro Maximum Blades

The Pro Maximum Blades by Pathos are made with pure 285-T4 and 285-T2 carbon fiber, subjected to a 36-hour heat-treatment process and polymerized under 8 tons of pressure for 24 hours. This method ensures a completely smooth, drag-free surface, making the blades durable and delivering optimal reactive response.

Structure and Materials

• The outer weave is made of 285-T4 4X4 carbon, which eliminates wrinkles, cracks, and distortion while promoting complete resin absorption.
• The inner weave uses 285-T2 2X2 carbon, with a weave pattern designed to optimize power transfer and elastic rebound along the entire blade.

Design and Functionality

The blades feature a C-Curve profile achieved through the design of the internal fibers, providing maximum flexibility and instant blade return. They are equipped with consistent water rails to guide water displacement, while the flap-shaped edge increases power in the final phase of the fin stroke, improving efficiency and reducing the freediver’s effort.

Technical Specifications

• Dimensions: 750 x 190 millimeters
• Blade angle: 24º
• Available stiffnesses: Soft, Medium, Hard

Compatibility

The Pro Maximum Blades are recommended for use with Pathos Fireblade foot pockets, specifically designed to optimize comfort and power transmission during finning.

Single Blade L-1090 for Freediving

The single blade L-1090 is designed specifically for spearfishing and freediving, available in three different stiffness options to match the thrust and response needs of each freediver.

Materials and construction: Made with selected materials to ensure lightness and mechanical strength, the blade provides effective power transfer and good responsiveness during finning. The choice of stiffness allows you to fine-tune the balance between flexibility and power, optimizing efficiency in the water.

Comfort and hydrodynamics: The blade design is engineered to reduce water resistance while maintaining smooth, fluid movement, supporting balanced trim and improved ergonomics during freediving dives.

• Available in 3 stiffness options to customize responsiveness
• Lightweight materials with high mechanical strength
• Hydrodynamic design for efficient power transfer
• Suitable for spearfishing and freediving