All Spearfishing Products

Piercing Wishbone for spearfishing and freediving

The Piercing wishbone is an essential and robust component, the result of advanced construction technology specifically developed for spearfishing. Its bridge is made from raw AISI 316 stainless steel, cold-drawn to ensure high mechanical strength. The spheres are joined using TIG welding, ensuring durability and reliability in the water.

Technical features and benefits

This wishbone is designed to be extremely short and rigid, allowing the correct spacing between the bands and a clean, precise sight line. Unlike Dyneema wishbones, which are soft and cause the bands to overlap, making aiming references more difficult, the Piercing keeps the bands separated, improving shot accuracy.

The wishbone is compatible with both notched shafts and shafts with pins, without causing significant wear, ensuring longer equipment life.

Ballistic efficiency and friction reduction

• The spheres have a reduced diameter of 5 mm, significantly smaller than standard 8 mm or larger spheres.
• This design limits band bulging near the tying point.
• Reduced band deformation lowers friction during the shot.
• The low weight of the wishbone helps improve ballistic performance, optimizing accuracy and smooth shaft release.

Dimensions and compatibility

The Piercing wishbone is available in three sizes (L1, L2, L3) to properly fit different band diameters, ensuring easy loading:

• Piercing L3: width 30 mm, length 32 mm, recommended for 14, 16, and 18 mm bands.

The L1 version, which is extremely short, is intended for experienced users and can also be used with large-diameter bands. It has been tested with tensile loads up to 90 kg, showing minimal deformation.

Comfort in use and quiet operation

The almost negligible weight of the Piercing wishbone is comparable to that of Dyneema wishbones, making buoyancy management in the water easier without weighing down the shaft.

Thanks to the design of the band cones, the tying leaves only a minimal portion of raw wire exposed, greatly reducing noise during the shot and ensuring quieter performance while spearfishing.

Heavy Duty replacement single flopper for non-recessed shafts

High-strength 1.2 mm thick single flopper, specifically designed for speargun shafts with a non-recessed flopper. The kit includes a rivet for secure, long-lasting installation of the single flopper on your shaft.

This replacement flopper lets you easily replace the damaged part, ensuring consistent thrust transfer and maintaining ideal trim during freediving and spearfishing.

Technical features

• Flopper thickness: 1.2 mm for high mechanical strength
• Compatible with shafts from 7.0 to 8.5 mm in diameter
• Suitable exclusively for shafts with non-recessed flopper systems
• Rivet included for fastening

Available in four different sizes to perfectly fit different shaft dimensions. This spare part ensures reliability and durability without compromising force transmission efficiency, essential for speargun control during spearfishing actions.

Knife Eagle Titanium - Ermes

The Ermes Eagle Titanium Knife is a high-end spearfishing knife, machined from a 4 mm titanium plate using CNC (Computer Numerical Control) manufacturing. The blade design evokes the stylized outline of an eagle, a symbol of agility, precision, and power underwater. Weighing just 48 grams and with an overall length of 172 mm, it is an extremely compact and easy-to-handle knife.

Titanium Blade: Strength and Light Weight

The blade is made entirely of titanium, a material that provides exceptional corrosion resistance, no galvanic reactions, and superior lightness compared to stainless steel. It requires no special maintenance: titanium does not rust and maintains its characteristics unchanged over time, even in aggressive marine environments.

• Blade thickness: 4 mm
• Total weight: 48 g
• Overall length: 172 mm
• Material: titanium – corrosion-resistant, lightweight, free from galvanic reactions

Double Edge: Versatility in Any Situation

The double-edge geometry combines two distinct functions in a single blade:

• Plain Edge – for clean, precise cuts on lines, fish, and various materials
• Serrated edge – for more demanding tasks that require greater cutting power

Integrated Shaft Extractor

A practical shaft extractor is integrated directly into the blade, making the knife a complete, multifunctional tool for spearfishing. It eliminates the need to carry a separate tool, optimizing space and convenience during the dive.

POM Handle and Safety Sheath

The handle is made of POM (polyoxymethylene), a technical material that combines ergonomic comfort, secure grip, and resistance to the marine environment. Available in white or black to match each spearo’s aesthetic preferences.

The POM-C sheath is custom-designed for the knife and includes:

• Satin-finished stainless steel cover
• Double AISI 316 stainless steel ball locking system for secure automatic retention and quick extraction
• Hole for safety lanyard
• Can be attached to the belt or arm (straps not included)

CNC Machining: Precision in Every Detail

Every component of the Ermes Eagle Titanium Knife is manufactured using CNC (Computer Numerical Control) technology, ensuring extremely tight machining tolerances, maximum repeatability, and high build quality in every single piece. The result is a reliable, precise, and durable knife designed to withstand the most demanding conditions of the underwater environment.

Technical Specifications

• Blade material: 4 mm titanium

Stopper Tube for AISI 316 Stainless Steel Roller Speargun

The Stopper Tube is a component specifically designed to be installed on Roller Speargun muzzles. Made from AISI 316 stainless steel, it ensures high mechanical strength and durability in the marine environment.

The tube is engineered to dampen the whiplash effect at the end of the wishbone’s travel, protecting the line from wear and breakage on impact. Its clean design and quality finish ensure smooth, reliable operation during spearfishing or freediving.

Technical Features

• Material: AISI 316 stainless steel, corrosion-resistant in underwater environments
• Outer diameter: 16 mm
• Inner diameter: 13 mm
• Two line guide teeth on the end for secure shaft locking at the speargun muzzle
• Lightened structure in several areas to reduce overall weight

Available Versions

• Length 110 mm
• Length 170 mm

Included

The product includes four self-tapping screws for direct mounting on the Roller Speargun muzzle, ensuring stability and easy installation.

Pair of Invert 37 Pulleys for Roller Spearguns

This pair of Invert 37 pulleys is specifically designed for Roller Speargun spearguns used in spearfishing. The outer component is made from black Derlin, machined from solid stock to ensure strength and long service life.

The pulleys are suitable for supporting lines with a diameter up to 3.0 mm, ensuring reliable operation during freediving sessions.

Technical Features

• Outer diameter: 37 mm
• Groove diameter: 31 mm
• Inner diameter (shaft): 6 mm
• Thickness: 6 mm

The internal bushing is made using high-tech materials and processes, ensuring optimal smoothness and high mechanical resistance during underwater use. This provides smooth line movement and improved shot efficiency.

Invert Wood 37 Muzzle Kit for Inverted-Propulsion Wooden Spearguns

Invert Wood 37 is a muzzle kit designed specifically for wooden spearguns with an inverted propulsion system and integrated stopper, suitable for models such as Demoltiplicati, Vela, Volcan, Invert Roller Speargun, and similar designs.

Construction and Materials

The kit frame is made of laser-cut stainless steel, reducing size and weight—key factors for improving the trim and tracking of the speargun while freediving.

The Invert 37 pulleys mounted on the frame are machined from Derlin and solid-turned PVC, materials selected to ensure maximum strength and long-lasting durability under the stresses of spearfishing.

Installation and Compatibility

The Invert Wood 37 muzzle kit is installed using the pulley through-shaft and the rear locking pin, both essential components for ensuring a stable and secure fit.

The kit is optimized for inverted-propulsion wooden spearguns, enhancing the functionality and precision typical of this type of spearfishing gun.

Naifu Knife for Freediving and Spearfishing

The Naifu knife features an ergonomic design engineered to be comfortably secured to the calf or belt, ensuring practicality and quick extraction during freediving and spearfishing.

Blade technical features

The 94 mm blade is made from AISI420B stainless steel, vacuum hardened at 1020°C and nitrogen cooled at 20 atm, a process that ensures high rigidity and mechanical strength. The blade incorporates a line cutter and extends internally along the full length of the handle, increasing stability and precision in use.

Handle and sheath

The handle and sheath are molded from POM acetal resin, a recyclable plastic material known for its high rigidity, low moisture absorption, and low-friction properties, essential for ensuring comfort, durability, and easy extraction in the underwater environment.

The sheath locking system features a central retention tooth that provides secure locking while remaining easy to release, allowing the knife to be quickly drawn even while wearing dive gear.

Dimensions and attachment

• Blade length: 94 mm
• Total knife length: 204 mm
• Handle and sheath color: black

The knife is supplied with two rubber straps equipped with stainless steel loops for secure attachment to the leg or arm. On the back of the sheath there is a hole for the optional addition of an elastic band, increasing anchoring versatility according to the preferences of the freediver or spearfisher.

Fast HD Carbon Fins - Camo Med by H. Dessault

The Fast HD fins are made from Japanese T700 carbon, a material known for its high elasticity and mechanical strength, ensuring optimal lightness and durability for spearfishing and freediving.

With a length of 86 cm, the blades provide a large thrust surface, ideal for ensuring efficient power transfer through every phase of the fin stroke. This feature delivers powerful, balanced propulsion, suited to a variety of spearfishing conditions.

The Fast HD - Camo Med feature a camouflage finish that blends perfectly with Mediterranean seabeds, extending across the blade and Foot Pocket for a full camouflage effect.

Main technical features

• Blade material: T700 Superforce Carbon
• Foot Pocket: 350 H Dessault model in Camo Med version without side rails, to maximize the elasticity of the carbon and reduce the force required during finning
• Blade stiffness: Available in 25 Soft, 30 Medium, and 40 Hard to suit different energy transfer requirements
• Dimensions: 86 cm blade length for an effective thrust surface
• Weight: Starting from 700 grams, optimized for lightness without compromising strength
• Water rails: Made from Elastic-K10 black to improve hydrodynamics and fin-stroke fluidity

Available sizes

• 40/41
• 42/43
• 44/45
• 46/47

The Fast HD fins stand out for their combination of responsiveness and comfort, allowing smooth power transfer with reduced muscle fatigue. The Foot Pocket without side rails and the high-elasticity carbon reduce the effort required, improving control and precision during freediving and spearfishing dives.

H. Dessault 350 Black Foot Pocket for Freediving and Spearfishing Fins

The H. Dessault 350 Foot Pocket is designed with a pre-shaped fit and differentiated thicknesses to optimize energy transfer from the foot to the blade without increasing overall weight. This feature improves responsiveness and finning efficiency during freediving and spearfishing dives.

The thin sections provide a high level of comfort, allowing extended use of the fins without foot fatigue.

Technical Features

• Material: TPE 75 ShA and high-modulus TPA, selected to combine elasticity and mechanical strength
• Weight: 350 grams for size 41-42
• Third-type pre-shaped anatomy for an ergonomic fit and improved hold
• Variable thicknesses to balance comfort and thrust transmission
• Mechanical fastening with safety screw for quick, stable assembly
• Compatible with interchangeable blades, ideal for customizing your gear to specific needs
• Available in 6 sizes: 36-37, 38-39, 40-41, 42-43, 44-45, 46-47
• Color: black (Black)

Assembly and Compatibility

The screw fastening system ensures solid, simple assembly of the foot pocket onto the blade, improving smoothness and control during underwater finning. The ability to use interchangeable blades makes this foot pocket versatile for different freediving and spearfishing gear configurations.

Freediving and Spearfishing Belt Lead Weight

500 gram belt Lead Weight, ideal for buoyancy compensation during freediving and spearfishing.

Made from durable materials, it ensures balanced weight distribution to improve stability and control in the water. The compact shape makes it easy to attach to the belt, ensuring comfort and practicality during dives.

Pendulum HS Drop 4 kg

Pendulum is a weight specifically designed for variable-weight descents in freediving and spearfishing. With a weight of 4 kg, it allows the diver to quickly reach the bottom and keep buoys anchored to the seabed stable.

The structure is equipped with a dyneema handle covered with a rubber grip, designed to ensure a secure and comfortable hold. This feature allows the spearfisher to handle both the speargun and the weight with one hand at the same time, optimizing efficiency and practicality in the water.

The modular design of the Pendulum also allows multiple weights from the same series to be combined to achieve a higher total weight, adapting to the specific buoyancy and depth requirements of spearfishing.

Technical specifications

• Weight: 4 kg
• Handle material: dyneema with rubber coating
• Use: variable-weight descents, buoy anchoring
• Compatibility: can be combined with other Pendulum weights to increase weight

Square Rubber-Coated Salvimar Lead Weight

The square Salvimar lead weight measures 7.5x7.5 cm and is designed to fit perfectly into the pockets of the Salvimar back pack backplate, ensuring secure, balanced positioning during underwater activity.

Made with a rubber coating, it provides greater protection against impacts and corrosion, preserving the weight’s characteristics over time and improving the material’s durability in the marine environment.

The lead weight features 7 mm holes for attaching it to a line, allowing it to be used also as a marker weight to precisely anchor equipment during freediving or spearfishing.

Available variants

• Red - 500 grams
• Yellow - 750 grams
• Black - 1000 grams

Calibro Black Mask for Freediving and Spearfishing

The Calibro Black mask, made by Cressi in Italy, is crafted from high-quality hypoallergenic silicone, ensuring long-lasting comfort and a perfect seal on the face. Its compact, hydrodynamic structure, combined with a minimal distance between the eyes and lenses, optimizes visibility and reduces drag during dives.

Technical Features

• Integrated dual-frame construction for greater strength and stability.
• 15% lens inclination for a wide field of view, including downward visibility, essential for inspecting the seabed while spearfishing.
• Patented Fog Stop system: a thin silicone membrane positioned around the nose that deflects the warm air released during equalization, significantly reducing lens fogging.
• Matte anti-reflective finish on the silicone skirt to avoid disturbing marine life and improve underwater camouflage.
• Adjustable, tilting silicone Strap thanks to buckles anchored to the frame, increasing the mask’s stability and comfort.

Materials and Comfort

The hypoallergenic silicone skirt provides elasticity and adaptability to different face shapes, delivering an airtight seal without excessive pressure. The matte-finish silicone processing helps minimize unwanted reflections, improving underwater visual efficiency and respect for the marine environment.

Available Variants

The Calibro Black mask is available in the following colors:

• Black
• Green
• Metal blue

Top Volare Spearfishing - Technical Bag/Backpack for Freediving and Spearfishing

Top Volare Spearfishing is a bag/backpack made from PVC Tarpaulin, a waterproof and tear-resistant material, ideal for carrying freediving and spearfishing gear.

Its generous dimensions (Length 121 cm, Width 33 cm, Depth 20 cm) make it suitable for carrying any fin model, including extra-long fins, along with a wetsuit, gloves, and socks, providing a compact and complete transport solution.

Technical Features

• PVC Tarpaulin material, waterproof and tear-resistant, for effective, long-lasting gear protection
• Main compartment with semi-perimeter double-slider zipper for easy access and organization
• Four dedicated side elastic attachments for secure transport of spearguns, optimizing gear management
• Internal neoprene pocket designed to protect the tips of carbon blades during transport, preserving their integrity and performance
• Dedicated external pocket for conveniently storing other accessories such as knives, mask, and snorkel
• Adjustable shoulder straps, improving comfort and practicality while on the move

Applications

This bag/backpack is designed specifically for freedivers and spearfishers who need a rugged, functional solution for carrying large fins and spearfishing gear. Its technical design and attention to materials ensure efficient, secure gear management on every trip to the water.

Best Divers Extendable Flag for Freediving and Spearfishing

The Best Divers extendable flag is specifically designed for use with buoys and atolls, but can also be used on its own on boats dedicated to spearfishing and recreational freediving.

Made with two segments of durable PVC, the shaft offers optimal strength and lightness. The extension mechanism integrates an internal band that ensures stability and makes assembly and disassembly easy in just a few seconds.

The PVC plastic flag ensures high visibility during dives, essential for safety and signaling in the water. Once extended, the shaft reaches a total length of 80 cm, an ideal size for quick, clear recognition.

Technical Features

• Extendable shaft made of 2 PVC segments
• Internal band for stability and quick assembly
• High-visibility PVC flag
• Extended length: 80 cm
• Simple and quick assembly and disassembly

Heavy Duty Black 8.0 mm Swivels for Spearfishing and Freediving Gear

The 8.0 mm Heavy Duty Swivels feature a black nickel-plated finish that provides corrosion resistance in marine environments, ideal for underwater applications such as spearfishing and freediving.

These accessories are the result of extensive research and targeted testing to ensure high mechanical performance under heavy load conditions. They are specifically designed to withstand breaking loads up to 260 kg, ensuring reliability during aiming and retrieval phases in deep Freediving.

Technical Specifications

• Swivel diameter: 8.0 mm
• Material: steel with black nickel-plated treatment for corrosion protection
• Breaking load: 260 kg
• Package: 2-piece blister pack

Applications

The swivels are suitable for connections and joins in spearfishing, enabling strong, secure force transfer between lines and terminal tackle, reducing torsional wear and increasing the overall service life of Freediving gear.

Sigalsub double-band Muzzle in glass-filled Nylon

The Sigalsub double-band muzzle is made from glass-filled Nylon, a material that provides high mechanical strength while maintaining a lightweight, compact structure. The design ensures excellent durability and secure fastening during spearfishing and freediving use.

This muzzle is equipped with:

• Stainless steel line guide, to ensure durability and corrosion resistance in the marine environment;
• Two O-rings that improve watertight sealing, optimizing band safety and stability;
• Locking pin that ensures a firm and precise fit on the bands.

The muzzle fits all barrels with a 26 mm diameter, allowing the installation of two circular bands for a double-band setup, essential for increasing shooting power in spearfishing.

Available in black, this muzzle is designed to deliver an important combination of lightness, functionality, and reliability in the water, essential for freedivers and spearfishers.

Galvanized Threaded Shaft for Salvimar Pneumatic Speargun

The galvanized threaded shaft for Salvimar pneumatic spearguns is made from heat-treated stainless steel, ensuring high mechanical strength and durability in the underwater environment.

The standard M7 thread ensures perfect compatibility with most pneumatic spearguns, helping maintain accuracy and power during spearfishing.

Each shaft is supplied complete with line slider, washer, and tailpiece, essential components for the assembly and optimal functionality of the pneumatic speargun.

Technical features

• Material: heat-treated stainless steel
• Thread: standard M7
• Available diameters: 7.0 mm and 8.0 mm
• Available lengths: from 35 cm to 110 cm
• Included: line slider, washer, and tailpiece

Stainless Steel Threaded Shaft for Salvimar Pneumatic Speargun

The stainless steel threaded Shaft for Salvimar pneumatic spearguns is made from heat-treated material to ensure mechanical strength and long-lasting durability even in the marine environment. The use of stainless steel provides corrosion protection, essential for spearfishing and freediving.

The standard M7 thread ensures perfect compatibility with pneumatic spearguns, optimizing power transfer and improving accuracy and shot power when spearfishing.

Technical features

• Available diameters: 7.0 mm and 8.0 mm
• Available lengths: from 35 cm to 110 cm
• Standard thread: M7
• Material: heat-treated stainless steel
• Complete with: line slide, washer, and tailpiece

Application and benefits

Specifically designed for pneumatic spearguns intended for spearfishing, this shaft ensures reliability and easy installation thanks to the included accessories. The combination of different diameters and variable lengths allows precise customization based on the speargun model and the freediver’s specific needs.

Rob Allen Snapper Railgun Speargun

The Rob Allen Snapper Railgun is a speargun designed to deliver durability and resistance to the impacts typical of spearfishing, both from a boat and around rocky environments. Its essential, rugged construction is ideal for those looking for a powerful speargun without unnecessary components, focusing functionality exclusively on the technical features required for spearfishing.

Construction and Materials

The barrel is made from aircraft-grade aluminum, offering excellent lightness and rigidity, with the shaft guide integrated into the barrel profile itself to eliminate flex and improve shot accuracy. The handle is made from glass-fiber-reinforced nylon to ensure excellent comfort and durability, while the trigger mechanism is built from solid stainless steel, providing reliability and corrosion resistance in the marine environment.

Performance and Technical Configuration

• Bands: twin 14.0 mm Green Rubber circular bands, selected for an optimal balance between power and release speed.
• Shafts: tri-cut Impact shafts, with variable diameters: 6.6 mm for versions up to 90 cm, 7.0 mm for longer models, to maximize rigidity and precision in power transfer.
• Muzzle: Vecta Open Muzzle, designed to provide improved hydrodynamics and smooth tracking.

Available Versions and Sizes

The Snapper Railgun is available in six lengths: 70, 80, 90, 100, 110, and 120 cm, allowing you to choose the right tool for different types of spearfishing. The shorter versions are suitable for medium-sized catches, while the longer ones also make it possible to target occasionally larger prey.

Use and Maintenance

Reloading and rearming after the shot is simple and fast, allowing you to quickly get back to spearfishing. The integrated shaft guide and barrel design provides excellent efficiency and accuracy, minimizing vibrations and flex that could compromise the shot. The setup also includes:

• Black Mono 2.0 mm nylon shooting line
• Shock Absorber to reduce vibrations
• Shark Clip for added safety when managing the shaft

Technical Features

1. Aircraft-grade aluminum barrel with integrated shaft guide
2. Vecta Handle Green handle in glass-reinforced nylon
3. Green Rubber twin 14.0 mm circular bands
4. Tri-cut Impact shafts, 6.6 mm (up to 90 cm) or 7.0 mm (over 90 cm)
5. Vecta Open Muzzle
6. Accessories: Black Mono 2.0 mm, shock absorber, and Shark Clip
7. Made in South Africa

Horizontal 40 - Horizontal Reel for Spearfishing

Horizontal 40 is a horizontal reel made from glass-filled nylon with a central steel core that ensures strength and mechanical resistance. The main body features a cage-style design for effective line retention, providing optimal balance during use underwater.

The reel is equipped with a small nylon cylinder that keeps the line in place, ensuring smooth, orderly handling during payout and retrieval in the water. This system improves practicality and helps prevent tangles, making power transfer easier when spearfishing.

Easy Release Safety System

Like all Pathos reels, the Horizontal 40 incorporates the Easy Release safety system, based on an adjustable drag with a steel spring. This technology allows the line to pay out automatically, which is essential for handling large fish on deep dives, allowing the spearfisher to ascend without restrictions or braking.

Construction Details and Compatibility

The drag control knob is positioned on the lower part of the reel and, although it does not fold horizontally for compactness reasons, it rotates on an arm that increases its effective rotation diameter. This feature makes it easier to retrieve the line even under load.

Horizontal 40 is compatible with all Pathos spearguns and installs easily thanks to the base screwed to the speargun barrel. Mounting is carried out by sliding it onto the rail, ensuring stability and quick attachment.

Technical Specifications

• Glass-filled nylon body with steel core for central reinforcement
• Easy Release safety system with adjustable drag and steel spring
• Capacity: 40 meters of 1.5 mm diameter line
• Compatible with all Pathos spearguns
• Mounting via screw-on base and slide-on rail system

Pathos Saragos Speargun for Freediving and Spearfishing

The Pathos Saragos is a compact, hydrodynamic speargun designed to deliver an optimal balance of power, accuracy, and practicality during spearfishing and freediving.

Construction and Materials

The barrel is made from 1.25 mm thick anodized aluminum, with an integrated Shaft guide that provides excellent rigidity and long-lasting resistance against marine corrosion. The design reduces hydrodynamic drag and promotes smooth movement through the water.

Handle and Trigger Mechanism

• D’Angelo II Handle anatomical right-handed design, with a long, flattened butt, optimized to improve control during loading.
• Non-slip rubber coating on the loading butt to ensure effective grip even with wet hands.
• Recessed Trigger Mechanism made from stainless steel, with a 7 cm longer stroke for a smooth yet powerful Release, ideal for precise Shaft release.
• Available also in universal or left-handed versions, ensuring adaptability to different Handle styles.

Muzzle and Technical Features

• Open Muzzle with a single band hole, designed to provide an excellent sight picture and allow the installation of two circular bands.
• Supplied with a single 17.5 mm circular band for a good balance between power and smooth loading.
• Shaft in 6.25 mm Sandvik steel, single-flopper, with shark fins and tri-cut tip, optimized to ensure accuracy and stability during the shot.
• Compatible with any Pathos reel for maximum customization.

Available Sizes

The Saragos is available in five sizes to suit the specific needs of the freediver or spearfisher:

1. 60 cm
2. 75 cm
3. 82 cm
4. 90 cm
5. 100 cm

Technical Conclusions

The Saragos speargun combines durable materials such as anodized aluminum and stainless steel with ergonomic solutions like the D’Angelo II handle. These features ensure high accuracy, efficient power transfer, and optimal ergonomics during spearfishing and freediving. The compact structure and Open Muzzle improve visibility and aiming speed, making the Saragos a reliable technical choice for the experienced freediver seeking control and power in a speargun.

Microsub Race 2 - Belt or Arm Knife for Spearfishing

The Microsub Race 2, made by Mac Coltellerie, is a compact, easy-to-handle knife, ideal for freediving fishing and spearfishing. Its small size makes it practical and quick to manage during underwater activity.

Technical Features

• Blade: black Teflon-coated stainless steel, sharp and resistant to the corrosion typical of the marine environment.
• Blade design: one plain edge for clean, precise cuts, one serrated edge for greater versatility during underwater tasks.
• Length: 6 cm blade with an overall knife length of 14.5 cm, balanced to ensure easy handling and control.
• Sheath: made of rigid hydrodynamic plastic, it ensures secure attachment with a click-lock system, making it easy to draw and reinsert even underwater.
• Attachment: designed for mounting on either a belt or arm, thanks to two included elastic straps, ensuring adaptability and comfort during underwater activity.

Applications and Benefits

Specifically designed for spearfishing, the Microsub Race 2 provides a practical solution for cutting and emergency tasks underwater. Its compact profile and easy attachment allow quick, unobstructed access, while the Teflon-coated stainless steel construction ensures durability and resistance to marine corrosion.

The hydrodynamic sheath helps reduce drag in the water while swimming, improving efficiency and fluidity of movement during freediving.

Condor C4 Mask - AntiFog for Freediving, Spearfishing, and Freediving

The Condor C4 - AntiFog mask is designed to deliver high performance in underwater disciplines such as freediving, spearfishing, snorkeling, and scuba diving. It features a highly hydrodynamic frameless design that minimizes internal volume, optimizing the balance between volume and visibility for a wide, unobstructed field of view.

Technical Features and Materials

• Soft silicone skirt, hypoallergenic, matte, and anti-reflective, which adapts perfectly to different face shapes, ensuring a comfortable seal and excellent ergonomics.
• Preformed nose pocket with a variable-stiffness system and differentiated thicknesses to make equalization easier during freediving descents.
• Tempered glass lenses positioned according to different interpupillary distances to increase visual accuracy and sharpness.
• Anti-fog finish on the lenses that eliminates the need for frequent treatments and ensures consistent visibility throughout the dive.
• Adjustable strap in soft silicone with angled MPS (Morphological Pivoting System) attachments to improve the seal and ensure comfort even during extended dives.
• Snorkel keeper loop integrated into the rear strap, equipped with a micrometric adjustment buckle and anti-entanglement system for practical and safe gear management.

Benefits for Freediving and Spearfishing

The Condor C4 - AntiFog mask, thanks to its carefully designed skirt and the use of high-quality materials, ensures a perfect fit to the face and long-lasting comfort. The wide field of view and reduced internal volume increase breathing efficiency and finning fluidity, essential elements for extending breath-hold times and improving concentration while spearfishing.

In addition, the preformed nose pocket with ergonomic design enables quick, precise equalization, reducing energy expenditure underwater. The anti-fog finish on the lenses provides a significant practical advantage in underwater environments, allowing uninterrupted, consistent visibility.

Product Specifications

• Color: Silver - White
• Design: Frameless, hydrodynamic profile
• Materials: Soft hypoallergenic silicone, tempered glass with AntiFog
• Attachment system: Morphological Pivoting System (MPS) for angled strap
• Adjustment: Rear strap with micrometric buckle and snorkel keeper loop

H-TYPE Rob Allen 1 kg Belt Lead Weight

The H-TYPE belt lead weight by Rob Allen is designed to provide balanced weight distribution during spearfishing and freediving. With a weight of 1 kg, it is a classic lead weight intended to optimize underwater trim and make diving easier without compromising freedom of movement.

Its shape and design are engineered to ensure stable and secure attachment to the belt, preventing unwanted shifting that could affect comfort and diving technique. Compatibility with standard belts makes this lead weight an essential component for precise weight adjustment during dives.

Main technical features

• Material: durable, long-lasting classic lead
• Weight: 1 kg, ideal for balanced load adjustments
• Design: ergonomic shape for a perfect fit on the belt
• Compatibility: suitable for standard freediving belts for spearfishing and freediving
• Functionality: optimizes underwater trim, improving stability and control during dives

Thanks to its simplicity and reliability, the H-TYPE Rob Allen lead weight is a practical and functional solution for spearfishers who need precise ballast control during dives.

Master Double-Chamber Spherical Signal Buoy

The Master signal buoy features a double-chamber construction that ensures strength and reliability in the water. The inner chamber is made of PVC, a durable and waterproof material, while the outer protective chamber is made of Nylon 300D, known for its high mechanical strength and durability.

Technical Features

• Double chamber with PVC inner chamber and Nylon 300D outer chamber for greater protection and durability
• 4 D-rings for secure, versatile attachment of accessories
• Nylon Carabiner included for quick attachment of the line
• Signal flag with push-fit mount, optimized for surface visibility
• Floating line integrated for transport and handling during freediving or spearfishing

Use and Functionality

The spherical design and double-chamber construction provide good stability in the water, while the floating line makes it easier to transport and position the buoy during freediving or spearfishing. The D-rings and carabiner allow you to customize the attachment of gear or signals in a practical and secure way.

Saplast Black Thermorubber-Coated Lead Weight

The Saplast Lead Weight is specifically designed for freediving and spearfishing enthusiasts, ensuring optimal balance during dives.

Made from high-density metal material, the Lead Weight is coated in black thermorubber to provide greater mechanical resistance and protection against impacts and wear during underwater use.

Technical Features

• Weight: 2 Kg, ideal for proper buoyancy control while diving.
• Color: black, to reduce reflections and ensure a low-profile appearance underwater.
• Anatomical shape: designed to fit ergonomically against the body, improving comfort and stability during descent and ascent.
• Thermorubber coating: improves grip on the wetsuit and reduces noise caused by rubbing against other materials.

This Lead Weight helps achieve balanced weight distribution, contributing to greater smoothness during finning phases and better buoyancy management while diving.

Spider Double-lined Neoprene Gloves for Freediving and Spearfishing

The Spider Gloves by Omer are made from double-lined neoprene, featuring an extremely elastic and durable material. The new cut and heat-welded joints, with no stitching and seam-taped construction, ensure a perfect watertight seal that helps keep the hand warm, even on the coldest dives.

Main technical features

• Available in two thicknesses: 3.0 mm and 5.0 mm, suited to different thermal protection needs.
• Four sizes available: S, M, L, and XL, for an optimal fit.
• Heat-welded joints for a fully watertight seal, preventing water ingress that would reduce thermal comfort.
• Large rubber reinforcements positioned in the highest-wear areas to increase the lifespan and mechanical resistance of the glove.

Benefits for freediving and spearfishing

The watertight design of the Spider Gloves helps retain body heat, promoting better blood circulation and preventing hands from getting cold during extended dives. Their elasticity allows excellent freedom of movement without compromising the sensitivity and comfort essential for spearfishing.

Usage tips

1. In colder periods, it is recommended to choose a size slightly larger than your usual one to improve circulation and increase thermal capacity.
2. Wear the gloves under the wetsuit wrist seals to ensure a complete seal and prevent water ingress.
3. Thanks to the rubber reinforcements and seamless construction, they are ideal for anyone looking for a glove with high mechanical resistance and durability, even under frequent stress conditions.

Smooth Skin Socks in Neoprene 3 mm

The Smooth Skin Socks are made from 3.0 mm thick neoprene, with a smooth outer surface and lined interior to provide proper insulation and thermal comfort during freediving and spearfishing.

The preformed design of the socks ensures an ergonomic fit that keeps the foot warm and reduces the risk of blisters, making movement in the water easier.

Technical Features

• Thickness: 3.0 mm for an optimal balance between thermal insulation and elasticity
• Smooth exterior (smooth skin): improves glide through the water and helps limit water absorption
• Lined interior: increases comfort and reduces friction against the skin
• Double-lined sole with external reinforcement: provides greater mechanical resistance and durability, protecting the sole of the foot from abrasive surfaces
• Preformed cut: ensures an anatomical fit that supports freedom of movement while freediving

Available Sizes

• Small (S)
• Medium (M)
• Large (L)
• Extra Large (XL)

Cressi Corsica Black Snorkel for Freediving and Spearfishing

The Corsica Black snorkel by Cressi is specifically designed for freediving and spearfishing. It offers a technical solution suited to the comfort and functional needs required by these disciplines.

Materials and Design

The tube is made from ultra-flexible polyurethane, a material that provides excellent adaptability and mechanical strength without compromising lightness. This feature promotes better hydrodynamics during underwater breathing and reduces bulk in the water.

The mouthpiece is made from hypoallergenic silicone, designed to ensure high comfort and a secure grip without irritation, essential during freediving dives or extended spearfishing sessions.

Cressi Camou Tracina 3.0 mm Socks for Freediving and Spearfishing

The Camou Tracina Socks are made from lined/open-cell neoprene with a total thickness of 3.0 mm, designed specifically to provide comfort and functionality during finning in freediving and spearfishing. The shape is designed to prevent folds and tension over the instep, improving fit and freedom of movement.

Materials and Construction

• 100% Ultraspan exterior: a highly elastic and hydrodynamic material that dries quickly and optimizes thrust transmission during underwater action.
• Open-cell interior with Blacklite coating: microporous and highly thermally insulating, it provides better protection from the cold and easy donning without the need for soapy water.
• Non-slip nylon sole: increases safety on wet surfaces, ensuring stability and mechanical durability.

Technical Features and Benefits

• High elasticity of Ultraspan neoprene for a perfect fit around the foot and freedom of movement.
• Improved thermal comfort thanks to the Blacklite coating, which helps retain body heat.
• Ergonomic design developed to prevent folds and tension, reducing foot fatigue during dives.
• Durable non-slip sole for abrasion resistance and increased safety in the water and on board.

Available Sizes

The Camou Tracina Socks are available in sizes S, M, L and XL, to best fit different foot shapes.

Elastic Pro Belt with Nylon Buckles for Freediving and Spearfishing

The Salvimar Pro elastic belt is specifically designed for freediving and spearfishing, ensuring optimal safety during dives.

Made from molded rubber and not cut from standard sheets, the belt features a dedicated contoured shape with beveled edges, making it easier to slide on lead weights and improving weight management and comfort during underwater activity.

The nylon buckle provides high mechanical strength and long-lasting durability, ensuring a reliable, secure closure during freediving and spearfishing.