All Spearfishing Products

Vacuum Muzzle Installation for Pneumatic Speargun

The vacuum muzzle installation service allows you to receive your pneumatic speargun with the muzzle already installed, ready for use in spearfishing. This service includes only the professional labor for installing the muzzle, leaving the freediver with only the task of getting ready for spearfishing.

Important note: the vacuum muzzle is not included in the service and must be purchased separately. Please make sure you have added the muzzle to your cart together with the installation service.

Slip-Tip Innerlock with Spectra Cable for Spearfishing

The Slip-Tip Innerlock is a breakaway tip designed specifically for bluewater spearfishing, where maximum efficiency and reliability are required against powerful, fast-moving fish.

The tip features a tri-cut 17-4 PH stainless steel construction, 9 mm diameter, heat-treated to ensure high mechanical strength and long-lasting durability. The Trigger Mechanism allows the controlled release of the front section of the tip upon impact with the fish, reducing the risk of shaft tear-out or breakage during the fight.

The connection cable is made from Spectra, an ultra-high breaking-strength fiber (320 kg), ensuring maximum reliability and safety when retrieving the catch. This feature helps maintain balanced trim and optimal force transfer between the shaft and tip.

Main Technical Features

• Detachable tri-cut tip in 17-4 PH stainless steel, 9.0 mm diameter
• High-strength Spectra cable with 320 kg breaking load
• Compatible with 7.5 mm shafts with M6 thread
• Secure Trigger Mechanism to prevent shaft damage and allow the tip to position crosswise

Benefits and Uses

Thanks to its construction and selected materials, the Slip-Tip Innerlock delivers efficient power transfer and precise trim, essential for effective and safe bluewater spearfishing. The breakaway design protects both the shaft and the catch, improving fish control without compromising the strength of the equipment.

Uragano 115 - Cetma Composites

The Uragano 115 is the flagship full carbon speargun by CETMA COMPOSITES: a spearfishing gun with a clean, elegant shape, fully profiled with a cuttlefish-bone geometry, engineered to deliver maximum performance on every dive. Supplied ready to fish, with all standard accessories already installed, it is the choice of the most demanding spearfishermen.

Design and Geometry

The barrel profile follows the distinctive cuttlefish-bone shape, extremely slim and tapered toward the muzzle, for optimal lateral tracking and smooth underwater maneuverability. The study of its geometries and volumes is not purely aesthetic: every detail is calculated for load balancing, maximized flexural stiffness, and reduced recoil. Along the entire lower section, the power unit — made up of the bands — is properly spaced from the barrel to eliminate any friction or vibration during the shot and make loading easier.

Dimensions

• Average thickness: 2.5 cm
• Muzzle width: 5.5 cm
• Maximum width: 10 cm

Construction: High-Modulus Carbon Monocoque

The barrel is a closed-structure high-modulus carbon monocoque, manufactured using CETMA COMPOSITES’ proprietary Zero-Defects Technology process. This completely innovative process makes it possible to produce a fully monolithic carbon fiber component with zero voids, maximizing structural performance and giving it the highest possible rigidity, unalterable over time.

The internal structure is made from a very low-density multifunctional polymer material with Aerospace-derived structural properties: a closed-cell polymer core with excellent vibration damping capability.

Finish

Anti-reflective matte, unpainted finish. CETMA COMPOSITES products are not painted: this is a sign of absolute quality, since low-quality carbon products often use paint to hide production defects.

VELA System: Performance Beyond All Expectations

The Uragano 115 is equipped with the proven VELA System, developed exclusively by CETMA COMPOSITES. Thanks to an innovative stopper positioned after the pulleys, the system provides a completely clear line of fire, allowing centimeter-accurate shots well beyond 7 meters with zero recoil. The pulleys are made of high-strength Derlin.

Standard Equipment (Ready to Fish)

• Tahitian Shaft 8.0 mm or 8.5 mm single-flopper CETMA COMPOSITES in ground PH steel, heat-treated to 49 HRC
• Double Roll trigger mechanism manufactured by high-performance ERMES solid-block EDM machining
• Reel mount and carbon reel: Real V50 with 50 m of Dyneema or Real V90 with 100 m of Dyneema
• Magnum Plus Band kit pre-installed with the VELA system, with stretch factors selectable by the customer according to hunting requirements
• Derlin pulleys
• All accessories in 316L stainless steel

Power and Penetration

The shaft’s penetration capacity can be adjusted according to the shaft type and selected band diameter. The recommended stretch factor for the bands is a maximum of 310%–315%, adjustable according to specific hunting requirements.

• Recommended Band: Magnum Plus Gold
• Guaranteed range: over 7 meters with centimeter-level accuracy

Shark Single Band Speargun - Cetma Composites

The Cetma Composites Shark single band speargun is a high-performance speargun 100% Made in Italy, designed to bring the advanced technology of Cetma carbon spearguns to a wider range of spearfishing enthusiasts. Born from the same DNA as the brand’s carbon models, the Shark single band combines an aerospace-grade aluminum oval-profile barrel with premium components to deliver shooting accuracy, maneuverability, and reliability on every outing.

Aerospace-grade aluminum oval barrel

The core of the Shark’s performance is its exclusive oval-profile barrel made from aerospace-grade aluminum. The oval shape maximizes structural rigidity, minimizing flex for pinpoint shooting accuracy. At the same time, it optimizes the speargun’s buoyancy, ensuring smooth, effortless handling that reduces fatigue during long spearfishing sessions. The improved profile also allows faster target acquisition, a key advantage in decisive moments underwater.

Single band configuration: the balance between power and control

The single band version of the Shark is the ideal configuration for those entering the Cetma Composites world or looking for a speargun that is accurate, responsive, and easy to load. The single band offers an excellent balance between propulsion power and reload speed, making it especially suitable for hole hunting, shallow-water spearfishing, and medium-sized fish. The configuration is ready for future upgrades: a reel, Vela system, camera mount, or double band can be added later.

Ergonomic Handle with integrated line guide

The ergonomically designed Handle provides a firm, comfortable grip even during longer dives, reducing hand fatigue and improving control of the speargun. The integrated shooting line guide ensures a smooth, consistent release, directly contributing to shot accuracy and repeatability.

Premium materials: 316L stainless steel and Delrin

Every component of the Shark is selected to ensure durability and corrosion resistance in the marine environment. The anti-recoil trigger mechanism and metal parts are made from 316L stainless steel, while the structural components use Delrin, a technical material known for its strength and long-term reliability.

What’s included in the package

• Oval barrel in aerospace-grade aluminum
• Tahitian Shaft
• Anti-recoil trigger mechanism in stainless steel
• Single rubber band
• Ergonomic Handle with integrated line guide

Available Sizes

• 72 cm — ideal for tight spaces, holes, and rocky bottoms
• 85 cm — versatile, excellent for mixed use and medium range
• 95 cm — increased range, suitable for medium and large fish
• 105 cm — maximum range in open water and bluewater

Support, spare parts, and warranty

• 2-year warranty on the entire speargun
• All spare parts always available
• Complete instructions and video tutorials for assembly and maintenance
• 100% Made in Italy production — Italian craftsmanship and Cetma Composites precision engineering

Arrow Carbon Speargun - Cetma Composites

The Arrow speargun by Cetma Composites is a monocoque carbon band speargun with extreme lines, designed for inshore spearfishing. The shape of the barrel recalls an arrow: a radically minimal design, with no muzzle, providing a perfect sight line with full view of the shaft in all conditions.

Monocoque Design and Maneuverability

The monocoque carbon structure is shaped with side grooves that bring the bands closer to the shaft, minimizing the speargun’s cross-section. Thanks to the recessed band geometry and the ultra-thin profile, the Arrow is extremely maneuverable and easy to swing, both horizontally and vertically — essential for moving nimbly among rocks and inshore crevices.

Reel Integrated into the Barrel

The reel is integrated directly into the barrel, available in two line-capacity versions: 50 meters or 90 meters. This construction solution eliminates external protrusions, making the speargun even sleeker and better balanced without sacrificing line capacity. A design choice that translates into real maneuverability while hunting.

AISI 316L Stainless Steel Release Mechanism

The release mechanism is made entirely from AISI 316L stainless steel by EDM machining, ensuring maximum dimensional precision, resistance to marine corrosion, and long-term reliability. The system used is the double-roll mechanism with integrated line release, with the option to position the line release on the right or left side according to the spearfisher’s preference.

Bands and Shaft Setup

• Bands: Black Progressive CETMA Composites Bands
• Double-band configuration: two pairs with 14 mm diameter
• Single-band configuration: 17.5 mm diameter
• Shaft: 6.5 mm diameter × 115 cm length
• Shaft with single flopper and double loading tabs
• Recommended band: Progressive Black

Availability and Lengths

The Arrow carbon speargun is available in multiple lengths to suit different hunting needs and seabed profiles. The Standard version offers an optimal balance of power, accuracy, and maneuverability for inshore spearfishing and rocky environments.

Cetma Composites Technology

Cetma Composites designs and manufactures its spearguns using a proprietary production process called Zero-Defects Technology, which makes it possible to obtain fully monolithic carbon fiber structures with zero internal voids. The result is maximum stiffness, unchanged over time, and superior build quality — to the point that Cetma products are not painted, leaving the carbon exposed as a guarantee of manufacturing excellence.

C4 Carbon line release system

The C4 Carbon line release system is designed for carbon spearguns in the C4 range and controls the release of the line connected to the shaft during the shot. The component is engineered to ensure smooth movement, mechanical reliability, and resistance to marine corrosion during spearfishing use.

Construction and materials

The system is made from AISI 316 stainless steel, a material used to provide high resistance to:

• saltwater corrosion
• abrasion
• mechanical wear

Construction with CNC components ensures mechanical precision and consistent performance over time, even with intensive use in salt water.

Compatibility and operation

This model is compatible with C4 Auto-R trigger mechanisms and can be configured on either the right or left side according to the speargun setup.

The system holds the line during loading and automatically releases it at the moment of the shot, helping to:

• reduce friction
• improve reloading speed
• provide greater safety during loading
• prevent line snagging
• prevent premature releases
• limit line twisting

Use in spearfishing

The C4 line release system is suitable for single- or double-band spearguns and maintains a smooth, precise release even under high band load.

C4 Auto-R mechanisms are designed to provide long service life, resistance to oxidation, and consistent trigger sensitivity over time.

Made in Italy.

Beuchat Shark Black Bi-Lens Low-Volume Freediving Mask

The Beuchat Shark Black is a bi-lens Mask designed specifically for freediving and spearfishing, with an extremely low internal volume of just 99 cm³. This significantly reduces equalization maneuvers during descent, improving breathing efficiency and underwater comfort.

Optimized Field of View and Materials

Despite its compact volume, the Ultra-Clear HD glass lens layout ensures a wide field of view and superior optical quality, with excellent color rendering and defined contrast—essential elements for visibility underwater.

Skirt Ergonomics and Comfort

The ergonomic silicone Skirt fits the contours of the face perfectly, ensuring a comfortable and secure seal. The rough anti-reflective surface prevents the mask from slipping between your fingers when putting it on or during equalization maneuvers, improving practicality in the water.

Flexible Design and Hydrodynamics

The mask features independent lenses not connected by any rigid structure or frame, allowing the Shark to deform in line with the shape of the face under pressure during descent. This design minimizes the need for frequent equalization and improves comfort.

In addition, the structure is optimized to provide minimal hydrodynamic drag, promoting a smooth, unrestricted descent.

Adjustment System and Fit

• Strap with wide rear band for greater stability
• Micro-adjustment system for a customized fit
• Materials engineered to ensure strength and lightness

Color: Black

C4 Carbon 300 Foot Pockets for Freediving and Spearfishing

The 300 Foot Pockets represent an innovation in Freediving and spearfishing equipment by C4 Carbon. Their name comes from their low weight, just over 300 grams, which helps significantly reduce fatigue during underwater finning.

Technical Features and Materials

Made with an innovative material that provides mechanical strength seven times higher than traditional materials, these foot pockets combine lightness and toughness without compromising durability. The internal volume has been optimized to ensure high ergonomics, minimizing thickness in contact with the foot, improving comfort and adaptability during the dive.

Anatomy and Comfort

The anatomy of the 300 Foot Pockets provides a unique fit, achieved by overlapping the shapes of the anatomical Mustang shoes, with a third-degree pre-forming that increases their effectiveness. Energy transfer is distributed evenly across the entire contact surface, preventing irritation points or stiffness. This allows for better blade stability during the kick, with reduced pain and greater propulsion efficiency.

Hydrodynamics and Design

The design of the 300 Foot Pockets is aimed at minimizing hydrodynamic drag: the lines are fluid and continuous, with no steps or interruptions, to facilitate water flow. The glossy surface further contributes to smooth glide, optimizing fluid movement in the water and reducing fatigue for the spearfisher.

Technical Specifications

• Weight: approximately 315 grams in size 40-41
• Reduced internal volume for lower energy expenditure during finning
• High mechanical-strength material
• Snug anatomical fit with 3° pre-forming
  
• Available colors: Black, White, and Silver

Use and Compatibility

The foot pockets are designed for use with blades from the C4 line, but can also be adapted to other blades using the dedicated kit, to improve thrust transfer and finning efficiency.

Attention: The 300 Foot Pockets are sold as a single piece.

Gear Bag Extreme 105L - H Dessault

The H Dessault Extreme 105L Gear Bag is a professional gear bag for transporting freediving and spearfishing equipment, made from high-frequency welded 500D PVC-Tarpaulin: a construction that ensures total waterproofing, high mechanical resistance, and long-lasting durability even in extreme marine and outdoor environments.

Construction and Materials

• Body material: 500D PVC-Tarpaulin, resistant to water, impacts, and abrasion
• High-frequency welding on all seams: eliminates water ingress points and ensures superior structural sealing compared to traditional stitching
• 600D Polyester straps for carrying: sturdy, wear-resistant, and moisture-resistant

Technical Specifications

• Capacity: 105 liters
• Dimensions: 85 × 46 × 36 cm
• Available colors: Orange, Green

Ideal Use

Designed for freediving, spearfishing, diving, and outdoor activities in wet or marine environments. The 105-liter capacity easily accommodates wetsuits, fins, masks, tanks, and accessories, keeping everything protected from water and the elements.

Extreme 105L Gear Bag - H Dessault

The Extreme 105L Gear Bag by H Dessault is a professional gear bag for transporting underwater equipment, made from high-frequency welded 500D PVC-Tarpaulin: a construction that ensures complete waterproof protection, high mechanical resistance, and long-lasting durability even in demanding marine and outdoor environments.

Construction and Materials

• Body material: 500D PVC-Tarpaulin, resistant to water, impact, and abrasion
• High-frequency welding on all seams: eliminates water ingress points and ensures superior structural sealing compared to traditional stitching
• 600D Polyester straps for carrying: durable, wear-resistant, and moisture-resistant

Technical Specifications

• Capacity: 105 liters
• Dimensions: 85 × 46 × 36 cm
• Available colors: Orange, Green

Ideal Use

Designed for freediving, spearfishing, and underwater activities as well as outdoor use in wet or marine environments. The 105-liter capacity easily accommodates wetsuits, fins, masks, cylinders, and accessories, keeping everything protected from water and the elements.

Carbon Pro Maximum Fins - Pathos

The Pathos Carbon Pro Maximum Fins are the ideal choice for spearfishing in shallow and medium-shallow water, where reaction speed, lightness, and immediate thrust make the difference. Designed as an evolution of the Fireblade and included in the Pathos carbon range alongside the Ultimate and Supreme, the Maximum stand out for their specific flex curve, more compact longitudinal dimensions, and a blade-to-foot pocket angle engineered to deliver excellent performance even for users without an extreme training background.

Carbon Fiber Fabric

The Carbon Pro Maximum blades are made from pure 285-T4 and 285-T2 carbon fiber, a combination that ensures high strength and instant response. The selected carbon fibers, paired with top-quality epoxy resin, provide stiffness, reliability, and long service life. The outer 285-T4 4×4 weave eliminates roughness, cracking, and blade distortion by ensuring complete resin impregnation, while the inner 285-T2 2×2 weave ensures a fast blade return.

Production Process

Each pair is heat-treated for 36 hours at 8 tons of pressure for 24 hours. This process gives the Maximum carbon blades a glossy surface that minimizes friction with the water and delivers more responsive performance. The manufacturing process also minimizes carbon fabric and epoxy resin waste.

C-Curve Technology

The Maximum blades distribute the power generated by the diver’s movement along their entire length. The special internal design, based on the arrangement of the carbon fabric, allows the blades to take on a full curved C shape under pressure, ensuring the best flexibility, efficiency, and functionality. Blade return is instantaneous.

Flap-Shaped Edge

After hundreds of hours of testing different edge shapes, the Maximum flap-shaped edge not only reduces the diver’s effort, but also adds extra thrust in the final phase of the leg movement. This feature allows less power to be used compared to previous models.

Water Rails

The Maximum carbon blades are equipped with side water rails that act as elastic guides, creating a water channel that prevents the fins from drifting sideways, preserving the diver’s energy. The water rails, with a constant height of 16 mm, are positioned along the blades for a total of 27 cm and are intentionally compact so they do not interfere with the flex of the carbon fiber, keep weight down, and avoid making the kick heavier.

24° Angle and Blade Geometry

The angle between the foot pocket and the blade is 24°, a medium value that delivers good performance and makes the fin accessible without requiring extreme training. The Maximum blades measure 62 cm down the center (from the curve under the foot pocket to the tip) and 54 cm along the side, with a maximum width of 18.8 cm inside the water rails. Blade thickness ranges from 0.66 mm at the flap tip, to 0.88 mm at mid-length, up to 1.25 mm in the area in front of the foot pocket, confirming a stiffness progression that optimizes both thrust and return.

The blade tip has a convex profile for improved thrust during the final phase of the kick.

Performance

The Maximum perform exceptionally well both on the surface, where they allow fast progress without tiring the legs, and at depth, with a quick push-off from the bottom and consistent thrust. They are designed for very fast spearfishing in shallow and medium-shallow water, where immediate responsiveness and energy saving are key factors.

Available Sizes

• Sizes: 38/40, 40/42, 42/44, 44/46, 46/48, 48/50
  

Cressi Gara Turbo Impulse Fins - Blue Metal

The Gara Turbo Impulse Fins by Cressi are an advanced technical solution specifically designed for deep freediving, engineered to optimize finning efficiency with minimal effort.

Technical Features of the Blade

The Blade is made from a thin, lightweight polymer, with a wavy profile designed to store elastic energy during the thrust phase, which is then released during the return phase to ensure smooth, powerful thrust transmission. The swallowtail design improves tracking, while the anti-slip side rails reduce lateral water spill, increasing hydrodynamic efficiency.

The 29-degree flex angle is calibrated to maximize finning performance while ensuring low energy expenditure. The structure is robust and impact-resistant, minimizing the risk of accidental breakage during use.

Gara Turbo Foot Pockets

• Short side rail designed to enhance the undulating movement of the Blade 
• Material: durable and comfortable thermorubber
• Structure: removable, with two self-adjusting components
• Instep: equipped with a 2 cm wide Self-Adjusting elastic band for a perfect anatomical fit
• Optimized force transmission from the foot to the Blade

Sizes and Color

The fins are available in 6 Sizes: 36/37, 38/39, 40/41, 42/43, 44/45, and 46/47, and come in blue metal, suitable for both experienced freedivers and beginners looking to improve their performance in the water.

Efficiency and Use

The Cressi Gara Turbo Impulse Fins combine lightness, responsiveness, and mechanical strength, ensuring effective, less tiring finning during freediving sessions. The innovative design and materials provide high propulsion, greater comfort, and fluid underwater movement, making them a reliable choice for spearfishing and freediving.

Blade Gara Impulse - Blue Metal

The Impulse Blue Metal Blade is designed to deliver high performance in finning during freediving and spearfishing. Ideal for freedivers of all experience levels, it features a thin, lightweight blade with a swallowtail design, optimized to improve directionality in the water and thrust transmission.

The blade is equipped with non-slip side rails that reduce lateral water spill, thereby increasing propulsive efficiency. The 29-degree flex angle ensures an optimal balance between maximum performance and minimal energy expenditure. The structure is engineered to provide high impact resistance, helping prevent accidental breakage during use.

Technical Features

• Blade material: plastic polymer
• Swallowtail design to improve directionality and thrust
• Non-slip side rails to reduce lateral water loss
• Flex angle: 29° for propulsive efficiency
• High mechanical impact resistance
• Self-adjusting Gara Modular Foot Pockets in thermorubber
• 2 cm Self-Adjusting elastic band for an ergonomic fit
• Available in two colors: Black and Blue Metal
  

X-Wing Blade - Mares

The Mares X-Wing blade is a high-level technical solution for freedivers looking for the perfect balance of agility, power, and control in the water. Made from high-quality elastomer, this blade is designed to deliver a smooth, stable, and high-performance fin stroke, adapting to the needs of those practicing freediving and spearfishing at every level.

Tapered Design and Variable Thickness

The tapered profile of the blade helps reduce water resistance during the fin stroke, promoting more agile and efficient movement. The variable thickness is one of the key elements of this design: it optimizes flex along the full length of the blade, delivering high propulsive performance without sacrificing maneuverability. The result is a blade that responds precisely and naturally to every leg kick.

V-Shaped Tip for Greater Stability

The distinctive V-shaped tip is specifically designed to ensure a more stable and directional fin stroke. This geometry reduces lateral water slippage, improving propulsive efficiency and movement precision—essential in hunting situations or during deep freedives.

Technical Features

• Material: high-quality elastomer
• Blade length: 713 mm
• Blade width: 190 mm
• Thickness: variable along the entire blade
• Tip: V-shaped design to prevent lateral slippage
• Flexibility: 30% softer than the Razor Pro model

Blades PULSE - Cetma Composites

The PULSE carbon blades by Cetma Composites are a true revolution in the world of spearfishing and water training. Designed and manufactured 100% Made in Italy, the PULSE introduce the Hyperbolic Curve: an exclusive geometry that delivers maximum thrust with minimal effort, redefining the concept of responsiveness for high-performance carbon blades.

Technology and Materials

The PULSE blades are built with a selection of aerospace-derived composite materials, chosen to ensure maximum hydrodynamic efficiency and the highest structural reliability in all conditions of use.

• 100% HM (High Modulus) and HR (High Resistance) Carbon: the optimal combination of stiffness and toughness for a blade that is responsive, reactive, and virtually indestructible.
• Hot Melt Pre-preg: the composite material is impregnated with hot-melt systems using high-performance resin, ensuring a consistent and optimal fiber/resin ratio across the entire blade surface.
• OOT Technology – Out-of-Autoclave Technology: an exclusive Cetma Composites production process that achieves the same quality standards as the aerospace industry without the use of an autoclave, optimizing control over the composite curing process.

ZDF Excellence – Zero Defects

The PULSE blades are produced with Cetma Composites’ proprietary ZDF (Zero Defects) technology. This aerospace-derived production standard ensures a component with 0% internal voids, free from structural defects and with a perfectly consistent fiber/resin ratio throughout the blade. The result is a blade that maintains its original mechanical characteristics over time, with no performance degradation.

FEM-Optimized Design

The geometry of the PULSE blades is the result of advanced design using finite element analysis (FEM – Finite Element Method). The structural simulation software used by Cetma Composites ensures optimal stiffness distribution, in order to reproduce a blade deformation profile that maximizes hydrodynamic efficiency during finning, both vertically and horizontally.

The Hyperbolic Revolution

The defining feature of the PULSE blades is the Hyperbolic Curve: a patented geometry that sets these blades apart from any other product currently on the market. Thanks to this shape, the blade delivers a unique biomechanical response, with instant responsiveness and powerful thrust from the very first kick. Ideal for spearfishing and intensive training sessions, the PULSE are designed for those seeking maximum performance without compromise.

Main Features

• Exclusive Hyperbolic Curve: maximum thrust with minimal effort
• 100% HM + HR Carbon: high elastic modulus and high mechanical strength
• Hot Melt Pre-preg: hot-melt impregnation for superior composite quality
• OOT Technology (Out-of-Autoclave): exclusive Cetma Composites aerospace production process
• ZDF Excellence – Zero Defects: 0% voids, defects, and structural discontinuities
• FEM Design: advanced finite element design for optimal hydrodynamic efficiency
• 100% Made in Italy
• Ideal for spearfishing and training

Minimal HD Blade - H Dessault

The Minimal HD blade by H Dessault combines compact dimensions with T300 carbon, offering an ideal technical solution for those starting to use carbon fins for freediving and spearfishing.

Technical Features

• Material: fine twill-weave T300 carbon, providing an excellent balance between lightness and mechanical strength
• Blade dimensions: 780 x 190 mm, optimized for effective thrust transmission
• Blade Stiffness: single stiffness (30 - Medium), for balanced responsiveness and efficient kicking
• Water rails: Elastic-K10 black, for improved hydrodynamics and water-flow stability
• Weight: 650 grams, ensuring comfort and ease of use even during extended sessions

Applications and Benefits

The Minimal HD blades are designed to offer a simple, lightweight, and effective product, especially suited to anyone looking for a first step into carbon fins. Ideal for freediving and spearfishing sessions, they ensure good power transmission and a solid balance between comfort and control.

Cetma Lotus Plastic Blades

The Cetma Lotus blades are designed for freediving, spearfishing, and pool training, offering an ideal balance of durability, responsiveness, and versatility. Made from a fiber-reinforced polymer composite, the blades provide elastic rebound similar to fiber blades, ensuring effective, smooth thrust throughout the fin stroke.

Technical Features

• Blades made from reinforced polymer composite for greater mechanical resistance to impacts and wear
• Excellent elastic rebound similar to fiber blades for efficient thrust transmission
• Blade dimensions: 650 x 185 mm

Applications

Lotus fins are suitable for freediving, spearfishing, and pool training sessions, thanks to their ability to combine durability and smooth finning even under intensive use conditions.

Prana Blades - Cetma Composites

The Prana Blades are an advanced model specifically designed for freedivers and spearfishers who demand uncompromising equipment in terms of quality and materials.

Materials and Construction

The blades are made of 75% carbon and 25% S-Glass, a high-strength fiberglass derived from the aerospace industry. Production involves an exclusive high-pressure, high-temperature vacuum process, with hot-melt impregnation using tetra-functional resin. This method ensures a defect-free component with a consistent fiber/resin ratio along the entire blade, delivering strength and lightness.

Engineered Design for Efficient Finning

The calibrated distribution of stiffness and mass along the blade promotes resonance within a range of natural frequencies that match the typical finning frequency. This configuration optimizes thrust transmission, reducing fatigue and increasing the fluidity of movement underwater.

Water rails: constant-profile structure with a height of 10 mm, designed for optimal stability and trim control.

Blade size: 667 x 185 mm, balanced to ensure efficient propulsion.

Variants

• Stiffness levels: 25 soft and 30 medium to suit different thrust and finning requirements.
  
• Logo and stringer colors:  red, orange, and yellow.

Applications

Prana blades are specifically designed to improve reactivity and hydrodynamic efficiency during spearfishing and freediving, making finning smoother and less tiring even during extended sessions.

Prana Blades - Cetma Composites

The Prana Blades are an advanced model specifically designed for freedivers and spearfishers who demand uncompromising equipment in terms of quality and materials.

Materials and Construction

The blades are made of 75% carbon and 25% S-Glass, a high-strength fiberglass derived from the aerospace industry. Manufacturing involves an exclusive high-pressure, high-temperature vacuum process, with hot-melt impregnation using tetra-functional resin. This method ensures a defect-free component with a consistent fiber/resin ratio along the entire blade, providing strength and lightness.

Engineered Design for Efficient Kicking

The calibrated distribution of stiffness and mass along the blade promotes resonance within a range of natural frequencies that match the typical kicking frequency. This configuration optimizes thrust transmission, reducing fatigue and increasing the fluidity of movement underwater.

Water rails: constant-profile structure with a height of 10 mm, designed for optimal stability and trim control.

Blade dimensions: 667 x 185 mm, balanced to ensure efficient propulsion.

Variants

• Stiffness options: 25 soft and 30 medium to suit different thrust and kicking requirements.
  
• Logo and stringer colors:  red, orange, and yellow.

Applications

The Prana blades are specifically designed to improve reactivity and hydrodynamic efficiency during spearfishing and freediving, making the kick smoother and less tiring even during extended sessions.

Prana Blades - Cetma Composites

The Prana Blades are an advanced model specifically designed for freedivers and spearfishers who demand uncompromising equipment in terms of quality and materials.

Materials and Construction

The blades are made of 75% carbon and 25% S-Glass, a high-strength fiberglass derived from the aerospace industry. Manufacturing involves an exclusive high-pressure, high-temperature, vacuum process, with hot-melt impregnation using tetra-functional resin. This method ensures a defect-free component with a consistent fiber/resin ratio along the entire blade, delivering strength and lightness.

Engineered Design for Efficient Finning

The calibrated distribution of stiffness and mass along the blade promotes resonance within a range of natural frequencies that match the typical finning frequency. This configuration optimizes thrust transmission, reducing fatigue and increasing the fluidity of underwater movement.

Water rails: constant-profile structure with a height of 10 mm, designed for optimal stability and control of trim.

Blade size: 667 x 185 mm, balanced to ensure efficient propulsion.

Variants

• Stiffness options: 25 soft and 30 medium to suit different thrust and finning requirements.
  
• Logo and stringer colors:  red, orange, and yellow.

Applications

The Prana blades are specifically designed to improve responsiveness and hydrodynamic efficiency during spearfishing and freediving, making finning smoother and less tiring even during extended sessions.

Cetma Mantra Blades - Carbon

The Mantra blades are the flagship model from Cetma Composites, specifically designed for freedivers and spearfishers who demand high-level technical equipment. Made entirely from 100% pre-preg carbon, the blades are built using an exclusive hot-melt impregnation technology with tetra-functional resin, applied under high pressure, high temperature, and vacuum conditions. This process ensures a defect-free blade, with a consistent fiber/resin ratio across the entire surface.

Design and Technical Features

The engineered distribution of stiffness and mass in the blade allows its natural frequency to be tuned to the finning frequency range, leveraging resonance to optimize thrust transmission and responsiveness. This advanced design improves the smoothness and efficiency of the kick during freediving and spearfishing.

Constant-section water rails with a height of 10 mm, designed to improve hydrodynamic tracking and stability in the water.

Available Variants

• Stiffness options: 20 super soft, 25 soft, 30 medium, allowing a calibrated choice based on kick style and required stiffness level.
  
• Blade dimensions: 742 x 195 mm, sized to provide an effective balance between thrust and maneuverability.
• Available graphics: gold, white, magenta.

Cetma Mantra Blades - Carbon 

The Mantra blades are the flagship model from Cetma Composites, specifically designed for freedivers and spearfishers who demand high-level technical equipment. Made entirely from 100% Pre-preg carbon, the blades are built using an exclusive hot-melt impregnation technology with tetra-functional resin, applied under high pressure, high temperature, and vacuum conditions. This process ensures a defect-free blade, with a consistent fiber/resin ratio across the entire surface.

Design and Technical Features

The engineered distribution of stiffness and mass in the blade allows its natural frequency to be tuned to the finning frequency range, leveraging resonance to optimize thrust transfer and responsiveness. This advanced design improves the fluidity and efficiency of the fin stroke during freediving and spearfishing.

Constant-section water rails with a height of 10 mm, designed to improve hydrodynamic grip and stability in the water.

Available Variants

• Stiffnesses: 20 super soft, 25 soft, 30 medium, allowing a calibrated choice based on finning style and the required stiffness level.
  
• Blade dimensions: 742 x 195 mm, sized to ensure an effective balance between thrust and maneuverability.
• Available graphics: gold, white, magenta.

Prana Fins - Cetma Composites

The Prana fins are an advanced model specifically designed for freedivers and spearfishers who demand uncompromising equipment in terms of quality and materials.

Materials and Construction

The blades are made of 75% carbon and 25% S-Glass, a high-strength fiberglass derived from the aerospace industry. The manufacturing process involves an exclusive high-pressure, high-temperature, vacuum process, with hot-melt impregnation using tetra-functional resin. This method ensures a flawless component with a consistent fiber/resin ratio along the entire blade, delivering strength and lightness.

Engineering Design for Efficient Finning

The calibrated distribution of stiffness and mass along the blade promotes resonance within a range of natural frequencies that match the typical finning frequency. This configuration optimizes thrust transmission, reducing fatigue and increasing the fluidity of movement underwater.

Design and Components

• Foot Pockets: S-Wing model without side rails, ensuring comfort and security when worn.
• Water rails: constant-profile structure with a height of 10 mm, designed for optimal stability and trim control.
• Blade dimensions: 667 x 185 mm, balanced to ensure efficient propulsion.

Available Variants and Sizes

• Stiffnesses: 25 soft and 30 medium to suit different thrust and comfort needs.
• Sizes: 39/40, 41/42, 43/44, 45/46 for a precise fit.
• Logo and side rail colors:  red, orange, and yellow.

Applications

The Prana fins are specifically designed to improve responsiveness and hydrodynamic efficiency during spearfishing and freediving, making finning smoother and less tiring even during extended sessions.

Prana Fins - Cetma Composites

The Prana fins are an advanced model specifically designed for freedivers and spearfishers who demand uncompromising equipment in terms of quality and materials.

Materials and Construction

The blades are made of 75% carbon and 25% S-Glass, a high-strength fiberglass derived from the aerospace industry. The manufacturing process uses an exclusive high-pressure, high-temperature vacuum process, with hot melt impregnation using tetra-functional resin. This method ensures a defect-free component with a consistent fiber/resin ratio along the entire blade, delivering strength and lightness.

Engineered Design for Efficient Finning

The calibrated distribution of stiffness and mass along the blade promotes resonance within a range of natural frequencies that match the typical finning frequency. This configuration optimizes thrust transmission, reducing fatigue and increasing fluidity of movement underwater.

Design and Components

• Foot Pockets: S-Wing model without side rails, ensuring comfort and a secure fit.
• Water rails: constant-profile structure with a height of 10 mm, designed for optimal stability and trim control.
• Blade dimensions: 667 x 185 mm, balanced to ensure efficient propulsion.

Available Variants and Sizes

• Stiffness options: 25 soft and 30 medium to suit different thrust and comfort requirements.
• Sizes: 39/40, 41/42, 43/44, 45/46 for a precise fit.
• Logo and side rail colors:  red, orange, and yellow.

Applications

The Prana fins are specifically designed to improve responsiveness and hydrodynamic efficiency during spearfishing and freediving, making the fin stroke smoother and less tiring even during extended sessions.

Mantra Fins in 100% Pre-preg Carbon for Freediving and Spearfishing

The Mantra fins are the flagship model from Cetma Composites, specifically designed for freedivers and spearfishers who demand high-level technical equipment. Made entirely from 100% Pre-preg carbon, the blades are built with an exclusive hot-melt impregnation technology using tetra-functional resin, applied under high pressure, high temperature, and vacuum conditions. This process ensures a defect-free blade, with a consistent fiber/resin ratio across the entire surface.

Design and Technical Features

The engineered distribution of stiffness and mass in the blade allows its natural frequency to be tuned to the fin-kicking frequency range, leveraging the phenomenon of resonance to optimize thrust transmission and responsiveness. This advanced design improves the fluidity and efficiency of the fin stroke during freediving and spearfishing.

Components and Comfort

• Assembly with S-Wing foot pockets without side rails, to increase comfort and freedom of movement.
• Constant-section water rails with a height of 10 mm, designed to improve hydrodynamic hold and stability in the water.

Available Variants

• Stiffnesses: 20 super soft, 25 soft, 30 medium, allowing a calibrated choice based on finning style and the required stiffness level.
• Sizes: 39/40, 41/42, 43/44, 45/46, to fit different foot sizes perfectly.
• Blade dimensions: 742 x 195 mm, sized to ensure an effective balance between thrust and maneuverability.
• Available graphics: gold, white, magenta.

Salvimar Noah Antifog Mask for Freediving and Spearfishing

The dual-lens Salvimar Noah Antifog Mask is specifically designed for freediving and spearfishing, ensuring comfort and optimal visibility during dives. This version features Lenses with a hydrophobic and anti-fog treatment, significantly improving the duration of clear vision underwater.

Main technical features

• Extremely low internal volume for easier equalization and reduced bulk while diving
• Wide field of view for excellent awareness of the surrounding environment
• High-visibility tempered glass Lenses, designed to activate the Antifog system on contact with water
• Hypoallergenic silicone structure molded around a Nylon frame, made with innovative fusion technology for greater strength and durability
• Ergonomic Strap with micrometric adjustment for a precise fit without pressure on the ears
• Color: Shining Blue

Materials and comfort

The fit is ensured by hypoallergenic, flexible, and comfortable silicone, which creates a watertight seal against the face without compromising comfort. The Nylon frame, integrated into the structure through fusion, increases the Mask’s mechanical strength, ensuring durability even under frequent use.

The ergonomic Strap, precisely adjustable, allows the Mask to be positioned optimally while maintaining freedom of movement and avoiding discomfort around the ears, a key factor for extended freediving sessions.

Benefits for freediving and spearfishing

• The low volume makes equalization easier during descent, helping with pressure control
• The wide field of view combined with the anti-fog Lenses maintains clear, stable visibility throughout the dive
• The hydrophobic and anti-fog treatment on the Lenses prevents condensation from forming, essential for an effective and safe dive

Salvimar Spearfishing Wetsuit for Spearfishing

The Spearfishing wetsuit is a two-piece wetsuit, ideal for freedive spearfishing and spearfishing. Made with Yamamoto 39 Open Cell split neoprene on the inside, it provides optimal stretch and fit. The outer surface is lined with ultra-stretch Spandex to improve freedom of movement and long-term durability.

Construction features and materials

• Assembled with double internal blind stitching and GBS (Glued Blind Stitching) system, for a watertight seal and reduced water infiltration
• Central two-component bonding to increase mechanical strength and ensure greater durability
• Sternal Reinforcements and localized anti-abrasion protection on the knees and seat for improved wear resistance
• Sealing finishes in RSS (Round Seal System) on wrists, ankles, face, and waist, helping retain body heat and improve thermal protection during dives

Design and comfort

• Composed of a hooded jacket and separate pants, sold individually or as a set
• Jacket closure with double-button beavertail for easier donning and a stable, secure closure

Technical specifications

• Available in three thicknesses: 3.5mm, 5.0mm, and 7.0mm, to suit different diving needs and water temperatures
• Six sizes available: S, M, L, XL, XXL, and XXXL, ensuring a calibrated fit

Drybackpack FH Salvimar: Waterproof Backpack for Freediving and Spearfishing

Drybackpack FH Salvimar is a waterproof backpack with a watertight roll-top closure, designed to provide maximum gear protection during freediving dives and spearfishing sessions.

Made with highly water-resistant materials, it ensures all contents stay dry, even in prolonged wet conditions. The 60-liter capacity lets you comfortably carry all essential gear, including fins, spearguns, and other key accessories for underwater activities.

Technical Features and Ergonomic Comfort

• Padded, adjustable, and removable shoulder straps to perfectly fit the freediver’s body shape and ensure comfort during transport.
• Safety straps: front, waist, and chest straps, for balanced weight distribution and improved stability while moving on land.
• Front waterproof pocket with zip closure, ideal for storing sensitive items such as keys and documents, ensuring practicality and security.
• Roll-top closure to ensure a watertight seal without compromising quick access to the contents.

Specifications

• Capacity: 60 liters
• Color: Black

The Drybackpack FH Salvimar combines durability, lightness, and waterproof performance, making it an efficient and practical solution for underwater activities such as freediving and spearfishing.

Salvimar Marina Gloves for Freediving and Spearfishing

The Marina gloves by Salvimar are designed with a pre-shaped anatomical design to ensure comfort and mobility during freediving and spearfishing activities. Their soft, stretchy construction makes them suitable for different thermal conditions, providing adequate thermal protection without sacrificing sensitivity.

Materials and Construction

Made from high-quality Jako neoprene, the gloves feature an outer Lycra lining for improved wear resistance and an inner Acquastretch fabric lining, promoting an optimal balance of comfort, thermal protection, and long-lasting durability.

Technical Features

• Reinforced seams to increase mechanical resistance and durability while diving
• Palm with anti-slip protection for a secure, stable grip on underwater objects or tools, without compromising tactile sensitivity
• Available in two technical thicknesses: 3.0 mm and 5.0 mm, to provide suitable thermal protection based on water temperature
• Six sizes available (XS, S, M, L, XL, XXL) for a precise fit, essential for maintaining dexterity and preventing water entry

Applications

The Marina gloves are ideal for freediving and spearfishing practitioners who need gear that delivers thermal comfort, excellent grip, and sensitivity during dives, while also ensuring durability and resistance to continuous exposure to saltwater.

Salvimar Neo Antifog Mask for Freediving and Spearfishing

The Salvimar Neo Antifog single-lens Mask is specifically designed for freediving and spearfishing, offering an effective combination of advanced functionality and comfort. Its tempered glass lenses with hydrophobic and anti-fog treatment ensure clear, condensation-free vision throughout the dive.

The extremely low internal volume makes pressure equalization easier during descent, while the wide field of view provides excellent awareness of the surrounding environment. The Antifog system, activated on contact with water, keeps vision consistently clear, improving precision and safety during freediving sessions.

To ensure a custom fit, the silicone Strap is micro-adjustable, allowing perfect adaptability even during longer sessions. The Skirt is made from hypoallergenic silicone, ensuring comfort, watertight seal, and elasticity—essential for preventing water ingress and making equalization easier.

• Single-lens Mask with high-visibility tempered glass lenses
• Hydrophobic treatment and Antifog system activated on contact with water to reduce fogging
• Low internal volume for improved pressure equalization
• Wide field of view for enhanced underwater environmental awareness
• Micro-adjustable silicone Strap for a precise fit
• Hypoallergenic silicone Skirt for comfort and sealing performance
• Color: Military Green

Single Blade C4 MB001 CAMOSKIN MED

The single blade C4 MB001 CAMOSKIN MED is available in two different stiffnesses, allowing a personalized choice based on spearfishing or freediving needs. Made with specific materials to ensure an optimal balance between
responsiveness and thrust transfer, this blade delivers an efficient, fluid kick.

The CAMOSKIN surface promotes better hydrodynamic control, reducing drag during the thrust phase and improving fluidity in underwater movement.