Freediving Gear

Shaft Ocean - Hunt Technology

The Ocean Shaft Hunt Technology is a top-of-the-line shaft for band spearguns and roller spearguns, made from 17-4 PH stainless steel, ground and certified by the steel mill. Computer numerical control (CNC) machining ensures straightness, precision, and excellent finishes, making it one of the most reliable and high-performance shafts on the spearfishing market.

Material and machining

Built from ground, certified, straight, and smooth 17-4 PH steel bars. CNC machining ensures minimal tolerances, maximum rigidity, and perfectly smooth surfaces for optimal hydrodynamic penetration. The material provides corrosion resistance, long-term durability, and consistent ballistic performance.

Shark-fin tabs and flopper system

The 4 finely offset shark-fin tabs are strategically positioned along the shaft — at 60 / 90 / 120 / 360 mm from the rear — for optimal in-flight stability and easy line routing. Their layout resembles the fins of a shark, directly contributing to ballistic performance. The floppers are recessed and partially disappear into the shaft profile, ensuring superior hydrodynamics.

• The floppers are welded directly onto the shaft to prevent deformation during use and ensure perfect penetration into the fish
• The single flopper features an innovative mounting system with a welded pin, positioned by default on the underside
• Available in Single Flopper (underside) and Double Flopper (opposing) configurations

Hole and line bridge configuration by diameter

The hole and line bridge configuration varies according to the shaft diameter, optimizing each size for its specific use:

6.25 and 6.50 mm diameter Shafts

• Rear hole (practical for hole shots)
• Hole on the preload shark-fin tab at 360 mm from the rear (convenient for ambush hunting and for roller spearguns)
• No line bridge

6.75 / 7.00 / 7.25 / 7.50 / 8.00 mm diameter Shafts

• Rear hole (convenient for hole shots)
• Line bridge at 375 mm from the rear, made from raw AISI 316 stainless steel
• Line passage height of 2.1 mm (length 8.00 mm): allows the use of large-diameter shooting lines or monofilament

Optional accessory: penetration cone

Available as an optional accessory, the CNC-machined brass penetration cone provides an optimal hydrodynamic profile, maximizing shaft performance during use.

Specifications and availability

• Available diameters: 6.25 — 6.50 — 6.75 — 7.00 — 7.25 — 7.50 — 8.00 mm
• Available lengths: from 75 to 190 cm
• Flopper configurations: Single Flopper (underside) / Double Flopper (opposing)
• Tip: Conical or Tri-Cut
• Compatibility: traditional band spearguns, roller spearguns, and enclosed-track spearguns (American style)
• Shark-fin tabs designed for: Dyneema wishbones and metal wishbones

Sigal Sub Marseillaise Belt for Freediving and Spearfishing

The Sigal Sub Marseillaise Belt is designed specifically to meet the needs of freedivers and spearfishers. Made from extremely elastic rubber, it ensures an excellent fit and comfort during dives.

It measures 140 centimeters in length and 4 millimeters in thickness, dimensions designed to provide proper balance and excellent pressure distribution on the body during use in the water.

The quick-release “Marseillaise” buckle is made entirely of stainless steel, ensuring high resistance to saltwater corrosion and long-lasting durability. This feature makes the belt practical and safe to use in marine environments.

Technical Features

• Material: elastic rubber
• Length: 140 cm
• Thickness: 4 mm
• Buckle: quick-release stainless steel (Marseillaise type)
• Available colors: Black, Red, White

Benefits for Freediving and Spearfishing

• High elasticity for an optimal fit as body volume changes during freediving descents.
• Mechanical and corrosion resistance thanks to the stainless steel buckle.
• Practicality when putting on and quickly releasing the belt while in the water.

Spillo-Stiletto 2006 Fish Stringer for Freediving and Spearfishing

The Spillo-Stiletto 2006 is a fish stringer designed specifically for spearfishing operators, valued for its practicality and proven functionality over more than a decade of use by HUNT.

Made with a Stainless Steel spike featuring an extremely sharp three-prong Tip, this tool allows you to both dispatch the fish quickly and precisely and securely pierce it for transport. This ensures greater efficiency and safety during the subsequent stages of the dive and return.

At the opposite end from the Tip, a Dyneema cord is attached, a material known for its high mechanical strength and light weight, serving as a retention system for the catch. The Line is adjustable via a practical button that allows you to:

• tension the cord during transport, preventing unwanted movement;
• extend the Line to make it easier to stow the fish during breaks out of the water.

The fish stringer fits into a belt Sheath with a secure locking mechanism, designed to prevent the spike from accidentally coming out during underwater movement.

Another technical aspect worth highlighting is the significant 350-gram weight of the spike, which helps balance the load on the belt, improving stability and comfort for the spearfisher while in the water.

Main technical features

• Material: Stainless Steel
• Tip: Sharp three-prong design for effective use on live fish
• Line: Dyneema with button adjustment system
• Sheath: Anti-slip-out safety locking fit, belt-mounted
• Spike length: 10 cm (short version)
• Weight: 350 grams, useful for belt balancing

The Spillo-Stiletto 2006 is ideal for spearfishers looking for a reliable, well-designed system for carrying caught fish, ensuring practicality, safety, and control in the underwater environment.

Foot Pockets Pathos Fireblade Soft - Black

The Fireblade Soft foot pockets by Pathos are designed to offer a balance of high comfort and the lightweight performance essential for spearfishing and freediving. Thanks to an exclusive blend of three types of vulcanized rubber, this foot pocket features a variable-stiffness combination to ensure specific function and comfort in the different areas of the foot.

Technical Features

• Soft toe and heel area: provides comfort and reduces fatigue during finning
• Medium-stiffness side rails: promote a smooth, natural blade movement while freediving
• Rigid metatarsal area: ensures stability and effective power transfer to the blade
• Thin side rails: designed to work effectively in the water without increasing resistance or fatiguing the leg
• Easy installation: blades can be secured with a few drops of cyanoacrylate glue for quick, practical maintenance
• Lightweight: low weight of 370 grams for greater freedom of movement underwater

Available Sizes and Color

• Sizes: 38/40, 40/42, 42/44, 44/46, 46/48, 48/50
• Color: black

Mares Training Buoy Flag Support

The support is designed to hold the Mares training buoy flag, an essential tool for freediving and spearfishing activities. This accessory ensures stable and functional attachment of the flag to the buoy, making identification and signaling in the water easier during training sessions.

The support is sold separately from the atoll (training buoy) and the flag, allowing you to easily replace or add the component without having to purchase the entire setup.

Technical Features

• Compatible with the specific Mares buoy flag
• Material resistant to corrosion and wear in marine environments
• Designed to keep the flag stable during freediving
• Easy to install and remove on the buoy

This support is an essential component for anyone using training buoys in freediving, as it ensures clear and safe visibility, improving efficiency and practicality during underwater training sessions.

MATC French-Style Prong Tip Trident Tip

The MATC Trident Tip prong tip is a patented model, especially appreciated for spearfishing sea bass, mullet, and other white fish. Specifically designed to increase effectiveness in murky water conditions, this trident tip ensures a higher success rate than a traditional Tahitian shaft.

Once even partially hit by the MATC trident tip, the fish has a reduced ability to escape, increasing the chances of success while spearfishing.

Technical Features

• Tips: three tips with a 6.0 mm diameter
• Center tip: threaded and interchangeable with M7 thread
• Barbs: movable stainless steel wire barbs, ensuring optimal hold on the prey and folding back to make extraction easier
• Available materials: stainless steel and titanium
• Sizes: Medium and Large

Specific Advantages

The patented system, thanks to its movable barbs, combines a solid hold with practical prey extraction, improving fish handling while freediving. The construction in strong, lightweight materials, such as titanium or stainless steel, ensures mechanical durability and lightness during spearfishing.

The M7 threaded version makes the trident tip compatible with standard threaded shafts, making tip replacement and maintenance easier while maintaining a balanced, stable setup for effective penetration in the water.

Magnum Arms for Textile Wishbones

The Magnum arms are designed for making textile wishbones intended for freediving and spearfishing. Made from work-hardened steel and subjected to heat treatment, they ensure high mechanical strength and long-lasting durability.

These arms, despite their simplicity, provide an effective technical solution for addressing the issues associated with using textile wishbones. Their design allows easy insertion into the bands, even those with small-diameter bores, ensuring a secure grip without compromising the integrity of the rubber.

Technical Features and Compatibility

• Compatible with traditional textile bridles, dyneema bridles, and Dynamic bridles
• Easy installation even on small-bore bands
• Can be used with bulk rubber for advanced customization
• Material: work-hardened steel with heat treatment to optimize strength and durability

The combination of materials and processing ensures an optimal balance between strength and light weight, important for maintaining hydrodynamic efficiency without weighing down the underwater setup. Their ease of use makes Magnum arms suitable for those looking for technical solutions to rig bands precisely and reliably for spearfishing.

Salvimar Pro Elastic Belt for Freediving and Spearfishing

The Salvimar Pro elastic belt is specifically designed to meet the needs of freedivers and spearfishers, ensuring comfort and functionality when carrying ballast weights.

Made from molded rubber using a dedicated process, unlike traditional elastic belts cut from rubber sheets, this belt features an exclusive contoured profile that provides better fit and practicality in the water. The beveled edges make it easier to slide and position the weights, optimizing load management during freediving sessions.

Main Technical Features

• Purpose-molded rubber material for freediving and spearfishing
• Contoured, beveled edges to make weights slide more easily
• Stainless steel buckle corrosion-resistant and with high mechanical strength

The stainless steel buckle ensures long-lasting durability even in marine environments, providing safety and reliability when fastening the belt during freediving sessions.

Standard Cordura C4 Fin Bag

The Standard Cordura Fin Bag by C4 is made from waterproof ripstop nylon, ensuring mechanical strength and long-lasting durability, even in underwater environments.

Designed as a bag/backpack, it allows you to easily carry your fins and part of your freediving and spearfishing gear, optimizing space and practicality.

Main features

• Cordura structure resistant to tensile stress and abrasion
• Dedicated external pocket for storing a mask, snorkel, or other essential freediving accessories
• Versatile design that combines functionality and comfort while traveling

This bag is ideal for freedivers and spearfishers who need a reliable storage solution for transporting their specialized gear, maintaining a balance between compactness and carrying capacity.

MB001 Carbon Fins for Freediving and Spearfishing

The MB001 fins are designed by C4 in collaboration with Marco Bonfanti, specifically developed for the needs of freedivers and spearfishers. Made from T700 carbon, they deliver an optimal combination of lightness, elasticity, and mechanical strength.

Reverse Parabolic Lamination Design and Technology

The main feature of the MB001 is the Reverse Parabolic: the parabolic flex curve is positioned close to the foot rather than at the tip, thanks to advanced lamination studies. This increases the thrust surface area in relation to hydrodynamic resistance, improving the mechanical behavior of the blade and significantly increasing propulsion.

The larger thrust surface makes it possible to use stiffer blades while maintaining the same level of effort, optimizing finning efficiency and performance in the water.

Technical Features of the Blade and Water Rails

• Blade size: 806 × 195 mm
• Fin size, size 42/43: 920 × 195 mm
• Material: T700 Carbon
• Available stiffnesses: 20 Super Soft, 25 Soft, 30 Medium
• Black water rails with a rounded profile to reduce turbulence, extending along the full length of the blade to improve water channeling and reduce edge vortices

Foot Pockets and Sizes

The MB001 fins are fitted with 250 foot pockets pre-shaped with a 3° angle, designed to ensure excellent comfort and smooth, direct power transmission.

The model is available in 7 sizes: 36/37, 38/39, 40/41, 41/42, 42/43, 43/44, 44/45, ensuring a precise and secure fit.

Applications

These carbon fins are specifically developed for freediving and spearfishing, offering a perfect balance between stiffness and elasticity for efficient thrust and greater underwater autonomy.

Lobster Neck Weight Segments Designed for Freediving

The segments for the Lobster neck weight are designed for freediving, with an innovative fastening system that allows the freediver to combine and assemble the segments according to their own weight and shape requirements.

The fastening mechanism uses rubber inserts that make the segments semi-mobile, allowing them to adapt to vertebral movement without limiting spinal mobility during freediving dives.

Technical Features

• Available in 5 different weights: 100 g, 200 g, 300 g, 400 g and 500 g, allowing modular, customized assembly.
• Variable size and weight to optimize trim in the water.
• Rubber inserts to ensure flexibility and adaptability to the natural curve of the back.
• Color: visible and identifiable red.

This modular system allows precise adjustment of the load on the neck weight, improving efficiency and comfort during breathing and underwater movement typical of spearfishing and freediving.

Salvimar Speeder Fins

The Salvimar Speeder Fins are made from variable-thickness polypropylene, with 3.5 mm near the foot and 1.8 mm at the blade tip. This construction provides an optimal balance between stiffness and flexibility, ensuring efficient thrust transmission with minimal effort during freediving finning and spearfishing.

Ergonomics and Comfort

The foot pocket is shaped from ergonomic rubber with variable thicknesses and integrates a molded rigid insole that improves power transmission and foot support. This configuration increases comfort, allowing for a snug fit and a high level of blade control.

Mechanical Strength and Hydrodynamics

The side rails are positioned under the sole of the foot and incorporate fused polypropylene side clips, ensuring excellent energy transfer from the foot pocket to the blade with no discontinuity points. This reduces hydrodynamic turbulence and prevents annoying interference while swimming.

Sizes and Specifications

• Stiffness: single
• Available sizes: 39/40, 41/42, 43/44, 45/46

3 mm Double-lined Neoprene Winter Beanie

The winter beanie is made from 3 mm double-lined Neoprene, a material that provides proper thermal protection during freediving and spearfishing in cold waters.

The double lining increases thermal insulation while maintaining excellent stretch and comfort. The elastic structure allows an ergonomic fit to the shape of the head, ensuring a comfortable fit without restricting movement.

Thanks to the fabric’s light weight and flexibility, the beanie provides an effective barrier against heat loss, improving comfort in the water and helping extend freediving session times.

Salvimar HyperStretch Neoprene Gloves

The Salvimar gloves are made from HyperStretch neoprene, ensuring a perfect watertight seal and exceptional comfort during freediving and spearfishing. The special construction provides excellent stretch and fit, essential for maintaining sensitivity and freedom of movement underwater.

Technical Features

• Reinforced palm with PuffGum technology, for increased mechanical resistance and durability during gripping and handling of gear.
• HT Weld System joints heat-welded and stitch-free, eliminating water entry points while improving thermal insulation and comfort.
• Design engineered to be worn correctly under the wetsuit cuffs, optimizing the watertight seal.

Operational Advantages

By using gloves in a slightly generous size and wearing them under the wetsuit cuffs, you achieve superior thermal insulation compared to gloves of the same thickness. This makes it possible to choose thinner neoprene, such as 1.5 mm, improving the sensitivity and tactile feedback essential during spearfishing.

Product Specifications

• Neoprene thickness: 1.5 mm
• Available Sizes: S and XXL

SigalSub Hydra Wetsuit for Spearfishing and Freediving

The Hydra wetsuit by SigalSub is made from Jako neoprene with a lined/open-cell construction, designed to provide the ideal balance between stretch and mechanical resistance during freediving and spearfishing.

Technical Features and Materials

• Camouflage outer lining in Lycra, durable and highly elastic, to improve concealment and freedom of movement in the water
• Reinforcements in supratex strategically placed on elbows and knees for mechanical protection and increased durability
• Sternal loading pad with external non-slip grip, improving stability while spearfishing and the feeling of security

Design and Fit

The wetsuit consists of a jacket with a double-clip beavertail closure that ensures a secure and practical fit. The pants feature a high waist with a smooth neoprene band, providing greater thermal sealing and preventing water from entering under the jacket.

• Watertight seals on wrists, ankles, and hood for superior sealing and minimized water entry
• Available in 5 sizes (2, 3, 4, 5, 6) to fit the body precisely and optimize comfort and mobility

Thickness Options

To suit different water conditions and temperatures, the Hydra wetsuit is Available in three neoprene thicknesses:

1. 3.0 mm for warmer waters and greater freedom of movement
2. 5.0 mm for versatile use and balanced thermal protection
3. 7.0 mm to provide thermal insulation during extended dives or in colder waters

Camoskin Med - C4 Spearfishing Wetsuit

Camoskin Med is a two-piece wetsuit designed for spearfishing and freediving, made with open-cell macrocellular neoprene on the inside and a stretchy outer lining with a gray/brown camouflage pattern.

Materials and Construction

The wetsuit is made from 100% CR (Chloroprene) limestone-based neoprene rubber with 99% calcium carbonate, one of the softest materials on the market thanks to its high elastic recovery. This neoprene is eco-friendly and TÜV certified for the absence of harmful substances such as phthalates and latex.

The inner lining is made of 95% polyester and 5% spandex, ensuring two-way stretch and excellent resistance to external elements, ideal for maintaining durability in the marine environment.

Design and Comfort

Camoskin Med features a pre-shaped anatomical cut and a reduced number of panels and seams. The panels are hand-glued and the seams are non-through. This configuration improves fit, mobility, and stretch, especially in critical areas such as the shoulders, knees, and elbows, allowing smooth, efficient movement.

The jacket features a toggle closure, reinforced with glued Melco Tape and Lycra binding to reduce the risk of tearing when putting it on and taking it off.

Protections and Reinforcements

• Abrasion-resistant Reinforcements on knees and elbows with polyurethane finish
• Padded Chest Pad for additional protection when loading the speargun

Variants and Sizes

The wetsuit is available as a complete set or separately as a jacket or pants, to suit different spearfishing needs.

• Available thicknesses: 3.0 mm, 5.0 mm, 7.0 mm
• Available Sizes: 1, 2, 3, 4, and 5

Additional Technical Features

• Type C hardness range: 0-2
• Elongation at break: 600%
• Digital camouflage colorway for effective camouflage 

Replacement Recessed Single Flopper for Hunt Ocean Shafts

Replacement kit consisting of a recessed single flopper and matching rivet for installation, specifically designed for Hunt Ocean shafts.

This solution allows you to precisely and reliably replace the damaged flopper on your spearfishing shaft, quickly restoring its functionality.

Technical Features

• Recessed single flopper designed to ensure a stable connection with the shaft
• Complete with fixing rivet for solid, long-lasting installation
• Available in 3 different sizes, compatible with shafts from 6.25 mm to 8.0 mm in diameter

Application

Recommended for replacing the flopper on any damaged Hunt Ocean shaft, maintaining the original characteristics of the shaft body and ensuring proper performance during tracking and shooting in spearfishing.

Red Diver-Down Flag with White Diagonal Stripe

The red diver-down flag with a white diagonal stripe is the nationally recognized standard symbol used to indicate the presence of a diver in the water. This signal is essential for ensuring safety during freediving and spearfishing activities.

Technical Features

• Made from durable fabric, suitable for use in marine environments
• Compatible with any buoy or flag pole
• Available in three sizes to suit different needs:
  
  • Small: 30x20 cm
  • Medium: 40x30 cm
  • Large: 40x55 cm

Use in Freediving and Spearfishing

The flag is used to clearly and immediately signal the presence of divers in the water, improving safety during freediving and spearfishing sessions. The flag’s visibility and contrast allow other water users to easily recognize the signal.

Mantra Fins in 100% Pre-preg Carbon for Freediving and Spearfishing

The Mantra fins are the flagship model from Cetma Composites, specifically designed for freedivers and spearfishers who demand high-level technical equipment. Made entirely from 100% Pre-preg carbon, the blades are built using an exclusive hot-melt impregnation technology with tetra-functional resin, applied under high pressure, high temperature, and vacuum conditions. This process ensures a defect-free blade, with a consistent fiber/resin ratio across the entire surface.

Design and Technical Features

The engineered distribution of stiffness and mass in the blade allows its natural frequency to be tuned to the finning frequency range, leveraging the phenomenon of resonance to optimize thrust transmission and responsiveness. This advanced design improves the smoothness and efficiency of the kick during freediving and spearfishing activities.

Components and Comfort

• Assembly with S-Wing foot pockets without side rails, to increase comfort and freedom of movement.
• Constant-section water rails with a height of 10 mm, designed to improve hydrodynamic hold and stability in the water.

Available Variants

• Stiffnesses: 20 super soft, 25 soft, 30 medium, allowing a calibrated choice based on kicking style and the required level of stiffness.
• Sizes: 39/40, 41/42, 43/44, 45/46, to fit different foot sizes perfectly.
• Blade dimensions: 742 x 195 mm, sized to ensure an effective balance between thrust and maneuverability.
• Available graphics: gold, white, magenta.

Salvimar Drop Shorts in 2.5 mm Double-lined Neoprene

The Salvimar Drop Shorts are made from 2.5 mm double-lined Neoprene with a pre-shaped cut designed for freediving and spearfishing. This technical garment is designed to improve the wetsuit’s thermal seal, reducing water entry between the pants and jacket.

Thanks to its sealing function, the shorts help limit water flow, increasing thermal comfort and allowing longer breath-hold sessions in cold water or low-temperature conditions.

Main Features

• 2.5 mm thick double-lined Neoprene for improved insulation and durability
• Pre-shaped cut for an optimal fit and freedom of movement in the water
• Sealing function to reduce water entry between pants and jacket
• Increases thermal comfort during freediving and spearfishing sessions
• Available in sizes M, L, XL and XXL

Top Hunt 80 Modular – Horizontal Reel for Spearfishing

The Top Hunt 80 Modular is a horizontal-geometry reel designed specifically for ambush and aspetto-style spearfishing. Its compact structure (80 x 90 x 60 mm) and low weight make it suitable for mounting on lightweight spearguns, as well as on more common commercial models thanks to the modular mounting system with interchangeable washers.

Technical Features

• Frame and drag knob made from burnished AISI 316 stainless steel, ensuring mechanical strength and durability in the marine environment.
• Spool machined from solid floating plastic material, designed to ensure lightness and make line management easier in the water.
• Equipped with two rear anti-tangle rollers that prevent the line from tangling during retrieval.
• Spool line capacity: approximately 45-50 meters of 1.5 mm line, suitable for spearfishing requirements.

Advanced Drag

The spool drag is very lightweight and adjustable, maintaining the set tension even under line pull. This allows:

• Fast retrievals in situations involving small fish, surge, or murky water.
• Constant drag tension during ascent to maintain contact with the fish without risk of losing it.

The drag can be made self-releasing by removing the metal washer in contact with the spool; this feature is especially useful with larger fish, allowing optimal operation without having to manually loosen the drag.

Compatibility and Modularity

Thanks to the special mounting washers included, the Top Hunt 80 Modular can be adapted to virtually any type of speargun, including the most common models on the market. This system allows the spacing between the mounting screws to be adjusted, ensuring a simple and secure installation.

Specific Applications

The reel is recommended for freediving spearfishing, especially for ambush and aspetto-style hunting techniques, thanks to its smooth rotation, light weight, and solid construction.

Ghost C4 Fins for Freediving and Spearfishing

The Ghost fins by C4 represent a technical advancement in the spearfishing and freediving sector, with a design aimed at optimizing thrust and underwater stealth. The blade, made from high-elastic-return transparent technopolymer, offers responsiveness comparable to carbon blades, ensuring smooth and efficient power transfer.

Technical Features

• Blade material: transparent elastic technopolymer for underwater camouflage
• Blade dimensions: 800×195 mm
• Blade Stiffness: Medium
• Water Rails: variable geometry, high-pressure overmolded to improve handling and stability in the water
• Foot Pocket: 250 model, designed to provide comfort and a precise fit
• Available sizes: 36/37, 38/39, 40/41, 41/42, 42/43, 43/44, 44/45, 46/47

Technical Benefits

The transparency of the blade allows perfect camouflage in the underwater environment, reducing visual detection by prey and therefore improving the approach phase during spearfishing. The high elastic return of the technopolymer ensures powerful, energetic thrust while preserving a smooth finning action and the overall lightness of the fin.

The 250 foot pocket is engineered to provide a snug and comfortable fit, allowing excellent control and thermal comfort during the dive. The Ghost fins are the result of years of laboratory testing and field trials by recognized athletes in the spearfishing sector.

Additional Information

• 100% made in Italy product, synonymous with quality and attention to technical detail
• Each pair comes with an information leaflet containing instructions and recommendations for fin maintenance and protection

Cetma S-Wing Foot Pockets for Freediving and Spearfishing

The S-Wing foot pockets are designed to optimize power transfer between the foot and the blade, ensuring full, stable support.

Compared to conventional foot pockets, the portion of the blade covered under the foot is increased by approximately 60%, significantly improving thrust transmission during finning.

Technical Features

• Longitudinal stiffening bands: distributed along the full length of the foot, similar to a ski boot, they minimize rubber deformation and maximize power-transfer efficiency.
• Lateral vertical stabilizers: by preventing side slipping, they improve stability and channel the water for better hydrodynamics during finning.
• Innovative material: a blend of highly elastic natural rubber combined with durable thermoplastic rubber, ensuring comfort, durability, and anatomical fit.

Comfort and Fit

The S-Wing wrap around the foot following its anatomical profile for an ergonomic, comfortable fit, essential for long freediving dives and spearfishing activities.

Sizes and Accessories

• Available in sizes: 39/40, 41/42, 43/44, 45/46
• Mounting kit included for easy, secure installation

Salvimar Bite Air Snorkel

Snorkel with an ergonomic shape and a cross-section similar to that of the human trachea, the Salvimar Bite Air ensures excellent ventilation during freediving and spearfishing.

Made from hypoallergenic silicone material, the mouthpiece is especially soft and comfortable, providing a secure grip and excellent ergonomics to reduce jaw fatigue. The flexible, lightweight tube makes breathing easier while maintaining comfort and freedom of movement underwater.

The snorkel is available in two color variants, Black and Green, to suit aesthetic preferences without compromising functionality.

HUNT Line Slider for 6.75 - 7.0 mm Pneumatic Speargun Shafts

The HUNT Line Slider is a precision component designed for pneumatic speargun shafts with a 6.75 mm and 7.0 mm diameter. CNC-machined from solid heat-treated and burnished 17.4ph steel, it offers excellent strength and durability.

The overall length of 25.0 mm and the tapered shape with a decreasing profile toward the shaft tip improve hydrodynamics and help increase shaft speed, optimizing penetration during spearfishing.

Main technical features:

• Line slider outer diameter: 10.0 mm, compatible with spearguns that use standard 10.0 mm washers, replaceable in place of the washer itself
• Compatible with pneumatic spearguns equipped with a 12.0 mm washer, usable resting against the washer
• AISI 316 stainless steel anchoring tabs TIG-welded with double 2.0 mm holes, well radiused for line attachment
• Specifically designed to increase thrust transmission and improve shaft tracking in the water

Applications

Suitable for use with pneumatic spearguns with 6.75 mm and 7.0 mm shaft diameters, the HUNT Line Slider ensures high efficiency during shaft retrieval and release, a crucial factor for accuracy and smooth movement during spearfishing.

Mares Element Snorkel for Freediving and Spearfishing

The Element snorkel by Mares features an anatomical shape designed to ensure comfort and practicality in the water. The tube is made from a soft material that provides flexibility during finning, while the hypoallergenic silicone mouthpiece offers a comfortable fit even during extended use, minimizing oral fatigue.

The snorkel’s technical tube design is the result of extensive research carried out by Mares, with diameters and lengths calibrated to minimize internal turbulence. This allows natural, smooth breathing during freediving or spearfishing, improving efficiency during the ventilation phase.

• Materials: soft tube and hypoallergenic silicone mouthpiece
• Anatomical shape for improved ergonomics in the water
• Optimized diameters and lengths to minimize turbulence and facilitate breathing
• Tube color: black, ideal for underwater camouflage

Thanks to its combination of comfort, hydrodynamics, and specific materials, the Element snorkel is suitable for freedivers and spearfishers who need equipment designed to support breathing during extended time in the water.

Picasso 1 kg Hydrodynamic Lead Weight for Freediving and Spearfishing

The 1 kg hydrodynamic Lead Weight by Picasso is a weight specifically designed for freediving and spearfishing applications. Its optimized shape ensures efficient reduction of hydrodynamic drag, helping you glide through the water during dives.

This belt weight, thanks to its carefully engineered design, significantly improves weight distribution, providing better trim underwater and greater stability during freediving dives.

Main technical features

• Material: dense metal for consistent, reliable weight
• Weight: 1 kg, ideal for balancing trim during freediving and spearfishing dives
• Hydrodynamic design: shape engineered to minimize drag in the water and make finning easier
• Ease of use: integrates perfectly with the weight belt for secure, practical attachment

Benefits underwater

The shape of this weight contributes to proper trim and reduced muscle fatigue, improving fluidity of movement and the ability to maintain control during freediving dives.

Suitable for freedivers and spearfishers looking for precise balance and reliable weight for their sessions at sea or in inland waters.

HUNT Special Washer for Air Shafts

Washer specifically designed for pneumatic speargun shafts with diameters of 6.5, 6.75, 7.0, and 7.5 mm, ideal for freediving and spearfishing applications.

Manufactured using CNC machining, it ensures dimensional precision and consistent construction quality, providing perfect integration with air shafts.

The washer’s outer diameter is 10 mm, a configuration designed to optimize contact and mechanical strength during use.

Camera Mount for H. Dessault Element Masks

The camera mount is specifically designed to be compatible with the Element line of masks by H. Dessault, allowing underwater recording devices to be attached easily.

Element masks feature a removable front frame on which the mount can be installed, ensuring a stable and secure connection during freediving and spearfishing.

Technical Features

• Made from strong, lightweight polycarbonate, ideal for underwater use
• Dovetail attachment angle that ensures a precise, stable connection
• Equipped with a safety bayonet pin to prevent accidental release, even during intense movements in the water

Benefits

• Easy installation and removal directly on the mask front frame
• Allows secure camera positioning, improving ergonomics and weight distribution
• Improves hydrodynamics by reducing frontal bulk during spearfishing and freediving

C4 Dyn Socks in High-Modulus Thermoplastic Polyethylene

The C4 Dyn socks are made from high-modulus thermoplastic polyethylene, a waterproof and cut-resistant material specifically designed for freediving and spearfishing. This choice provides effective protection against water and abrasive agents, ensuring long-lasting durability in fresh and salt water.

Technical features and functionality

• Material: high-modulus thermoplastic polyethylene, waterproof and cut-resistant.
• Non-slip sole to ensure stability when using the fin.
• Ankle reinforcement that keeps the sock snug and prevents the fin from accidentally slipping during finning.

Use and versatility

These socks are versatile and suitable for use both in the pool and at sea. They can be used:

• as substitutes for neoprene socks in warm waters, offering comfort and protection without excessive thermal insulation;
• as oversocks over 2.0 or 3.0 mm neoprene socks in cold waters, to increase thermal insulation while maintaining freedom of movement.

Available Sizes

The C4 Dyn socks are available in five sizes to ensure a precise and functional fit:

• XS
• S
• M
• L
• XL

Extreme 60L Waterproof Backpack for Freediving and Spearfishing Gear

Extreme 60L is a waterproof backpack made from PVC Tarpaulin, a highly durable, waterproof, and tear-resistant material, ideal for carrying freediving and spearfishing gear.

With a capacity of 60 liters, this backpack lets you comfortably carry all the essential underwater gear while keeping it protected from water and external elements.

Technical Features and Functionality

• Large capacity and ergonomic shape for carrying wetsuits, cylinders, accessories, and apparel specifically for freediving and spearfishing
• Adjustable side elastic attachments for securely and conveniently fastening spearguns
• Dedicated front pocket for carrying fins, with a top clip opening for easy access and watertight closure
• Adjustable shoulder straps with a central safety buckle to ensure stability and comfort while on the move

Materials and Durability

The PVC Tarpaulin used provides mechanical resistance to abrasion, complete waterproofing, and long-lasting durability even in marine environments. These features ensure effective protection for freediving and spearfishing equipment during transport and dive sessions.

Comfort and Ease of Use

The Extreme 60L backpack is designed to make it easier to carry long, bulky gear such as fins and spearguns, thanks to the external attachments and dedicated pocket, without compromising handling. The adjustable shoulder straps improve weight distribution and stability, offering superior comfort during long preparation sessions or when moving to dive spots.

Nose Clip for Freediving and Spearfishing

Nose Clip is an ergonomically designed nose clip, built to provide lightness and compactness, making it easier to manage descent and ascent phases during freediving.

Technical Features

• Ergonomic shape specifically designed for comfort and effective nasal equalization
• Lightweight materials that ensure practicality without affecting underwater control
• Adjustable lanyard that allows it to be worn either directly on the nose or attached to the mask
• Black color for a discreet look that suits a wide range of gear setups

Benefits for the Freediver and Spearfisher

Allows you to keep your hands free during equalization, improving movement fluidity and focus during freediving and spearfishing sessions. The versatility of the adjustable lanyard optimizes comfort and ease of use in different dive conditions.