Hunt

AISI 316 Stainless Steel Penetration Cone for HUNT Shafts

The penetration cone in AISI 316 stainless steel is a technical accessory designed for installation on spearfishing shafts. It can be mounted on request by gluing or TIG welding, ensuring a strong and durable connection.

Machined from solid bar stock by turning, this small cone is designed to significantly increase shaft penetration when using a non-recessed flopper, improving accuracy and effectiveness underwater.

Technical Features

• Material: AISI 316 stainless steel, resistant to marine corrosion
• Manufacturing: machined from solid bar stock for maximum strength
• Mounting: gluing or TIG welding for secure fastening

Available Sizes

• Bore 7.0 mm, outer diameter 10.0 mm
• Bore 7.5 mm, outer diameter 10.0 mm
• Bore 8.0 mm, outer diameter 11.0 mm
• Bore 8.5 mm, outer diameter 11.0 mm

Recommended for shafts with a non-recessed flopper, the cone improves penetration during spearfishing, optimizing the shaft’s thrust and trim during the shot.

Loading Hook for Hunt Roller Spearguns

The loading hook for Hunt roller spearguns is made from 2.0 mm steel wire, ensuring high mechanical strength and long-lasting durability. This component is essential for assembling and using loading aids in roller systems, allowing the line to be secured safely and reliably while loading the speargun.

Used together with line and protective rubber, the hook allows you to assemble the loading aids required for efficient installation of the roller system, improving ease of loading and practicality in the water.

Technical features

• Material: 2.0 mm steel wire with high mechanical strength
• Compatibility: specific for roller systems
• Function: assembly of loading aids with line and protective rubber

Use

1. Assemble the hook with the line and protective rubber.
2. Install the loading aid on the roller speargun to make loading easier.
3. Ensure the system is properly secured and safe before freediving.

Replacement Recessed Single Flopper for Hunt Ocean Shafts

Replacement kit consisting of a recessed single flopper and matching rivet for installation, specifically designed for Hunt Ocean shafts.

This solution allows you to precisely and reliably replace the damaged flopper on your spearfishing shaft, quickly restoring its functionality.

Technical Features

• Recessed single flopper designed to ensure a stable connection with the shaft
• Complete with fixing rivet for solid, long-lasting installation
• Available in 3 different sizes, compatible with shafts from 6.25 mm to 8.0 mm in diameter

Application

Recommended for replacing the flopper on any damaged Hunt Ocean shaft, maintaining the original characteristics of the shaft body and ensuring proper performance during tracking and shooting in spearfishing.

M4 Threaded Insert - Hunt Technology

The M4 Threaded Insert by Hunt Technology is a precision accessory handcrafted from AISI 316 stainless steel, designed specifically for use in spearfishing and underwater equipment. With an M4 internal thread and an M6 external thread, it allows components with different metric threads to be adapted and connected on spearguns, reels, and underwater shooting systems.

Technical specifications

• Internal thread: M4
• External thread: M6
• Material: AISI 316 stainless steel

Material and durability

The choice of AISI 316 stainless steel is no coincidence: it is the stainless alloy of choice for marine environments, offering extremely high resistance to saltwater corrosion, pressure changes, and mechanical wear. It ensures total reliability even after intensive use in open water.

Hunt Technology handcrafted production

Hunt Technology is a Tuscan artisanal company founded by Paolo Dainelli, recognized in the spearfishing world for the exclusive quality of its machining and its meticulous attention to detail. Every component is designed by spearfishers for spearfishers, using premium materials and superior-grade finishes.

Compatibility and use

The M4 threaded insert is a versatile accessory, ideal for mounting, connecting, or adapting components on:

• Band-powered spearguns and pneumatic systems
• Reels and spearfishing brackets
• Hunt Technology release mechanisms and technical accessories
• Any application requiring conversion from M4 to M6 thread

Wrench for Slip-Tip Point Installation

Specialized tool for tightening and securing Slip-Tip points, essential for ensuring a stable and safe setup during freediving and spearfishing.

Made from stainless steel, this wrench provides excellent corrosion resistance and long-lasting durability in the marine environment.

Compatible with M7 thread, it ensures precise and reliable tightening of the tips, improving the safety and rigidity of the speargun or custom-mounted equipment.

HUNT Special Washer for Air Shafts

Washer specifically designed for pneumatic speargun shafts with diameters of 6.5, 6.75, 7.0, and 7.5 mm, ideal for freediving and spearfishing applications.

Manufactured using CNC machining, it ensures dimensional precision and consistent construction quality, providing perfect integration with air shafts.

The washer’s outer diameter is 10 mm, a configuration designed to optimize contact and mechanical strength during use.

Dynamic Arch for 2.0 mm Stainless Steel Wishbones

The Hunt Dynamic arch is a robust component made from 2.0 mm raw stainless steel wire, specifically designed for use on wishbones intended for spearfishing and freediving.

Technical Applications

This arch is compatible with metal and textile wishbones (Dyneema), offering a rigid structure while maintaining the light weight needed for efficient power transfer in the water. Used with Magnum arms, it forms the lightest articulated metal wishbone available, with a total weight of just 5 grams.

Main Features

• Material: high-strength 2.0 mm raw stainless steel
• Function: provides rigidity to textile wishbones while keeping them lightweight
• Compatibility: can be used on metal and textile wishbones for spearfishing
• Lightweight: helps reduce the overall weight of the wishbone
• Durability: durable, corrosion-resistant structure for marine environments

AISI 316 Sandvik Stainless Steel Curly Line Guide

The Curly Line Guide is a 2.0 mm diameter rod, bent back on itself to form an eyelet that allows the guided passage of the line coming from the reel. Made from high-toughness AISI 316 stainless steel produced by Sandvik, it ensures mechanical strength and durability in the marine environment.

This essential accessory is installed under the speargun muzzle to guide the line coming out of the reel, helping it lay correctly and accommodating the line wraps connected to the shaft.

Technical features

• Rod diameter: 2.0 mm
• Material: high-toughness Sandvik AISI 316 stainless steel
• Shape: curly eyelet for line passage
• Installation: under the speargun muzzle

Applications and uses

The HUNT “R” curly line guide is suitable for:

• Guiding the line during loading and retrieval
• Line routing, helping prevent snags and uneven wear
• Line guide to keep the line connected to the shaft neatly organized
• Installation on wooden spearguns and existing spearguns

This component provides better line management in spearfishing and freediving, improving functionality and safety during use.

2.0 mm Stainless Steel “U” Line Guide

The “U” line guide is made from 2.0 mm diameter stainless steel rod, bent into an angled “U” shape. This specific geometry provides effective line management and support during spearfishing activities.

The choice of stainless steel ensures high mechanical strength and good corrosion protection in marine environments, delivering durability and reliability even with frequent freediving sessions.

The angled structure improves line guidance, reducing friction and making retrieval and shooting operations easier during spearfishing.

6.5 mm Stainless Steel Rocker Wrench for Hunt Shanks

The special 6.5 mm rocker wrench is made from stainless material to ensure mechanical strength and long-lasting durability in the underwater environment. This non-standard tool is specifically designed for optimal tightening of the Hunt shank, while preserving the hexagonal geometry essential for proper fastening.

Thanks to its rocker configuration, it ensures uniform and precise force transmission, reducing the risk of damage to the shank during maintenance or assembly of the pneumatic shaft.

Technical Features and Benefits

• 6.5 mm hex diameter, non-standard type for specific Hunt shanks
• Stainless steel material, providing high corrosion resistance in marine environments
• Rocker shape for controlled tightening that preserves the shank geometry
• Suitable for use with pneumatic spearfishing shafts, preserving the system’s mechanical functionality

Applications

An essential tool for freedivers and spearfishers performing maintenance or modifications on Hunt pneumatic shafts. It optimizes component durability by ensuring proper, secure tightening without deforming the mechanical elements.

Brass Penetration Cone - Hunt Technology

The Hunt Technology Brass Penetration Cone is an accessory for spearfishing shafts, handcrafted with CNC machining and the care and manufacturing precision that distinguish Hunt’s Tuscan production. Designed to improve shaft performance during hunting action, it combines technical functionality and material quality in a compact, reliable component.

Function and Benefits

The cone serves two essential functions: it helps the floppers enter and pass through the flesh and bones of the fish, reducing resistance on impact, while also making the shaft more hydrodynamic as it travels through the water, improving accuracy and trajectory.

Compatibility and Installation

• Particularly suitable for double-flopper shafts
• Available in brass for shafts with 6.25 mm diameter, 6.50 mm diameter, and 7.00 mm diameter
• Secured with strong threadlocker (not included)
• CNC machining for maximum dimensional accuracy and a perfect fit on the shaft

Material

Made of brass, a material that provides strength, corrosion resistance in marine environments, and low weight. For larger diameters (7.25 mm and 7.50 mm), Hunt Technology offers an alternative version in stainless steel.

Hunt Technology

Hunt Technology is a Tuscan artisanal company founded by Paolo Dainelli, specializing in the production of high-performance accessories and equipment for spearfishing. Each product is designed and manufactured with outstanding workmanship and premium-quality finishes.

High-Tenacity AISI 316 “U” Line Guide

The “U” line guide is made from AISI 316 Sandvik stainless steel rod with a 2.0 mm diameter, bent and angled to ensure precise, durable line guidance. Designed for installation either under the speargun muzzle or laterally above the reel, it offers versatile functionality for efficient line management.

Technical features and applications

• Made from high-tenacity AISI 316 stainless steel, ensuring excellent mechanical strength and long service life in underwater environments.
• Angled “U” shape designed to guide the line coming from the reel, helping it exit smoothly and preventing unnecessary friction during handling.
• Can be installed in two positions: under the speargun muzzle to guide the line during reloading, and laterally above the reel to lower the line and help maintain tension on the speargun while avoiding interference.
• Compatible with shooting lines connected to the shaft, ensuring smooth, controlled line routing.

Benefits in use and installation

This HUNT line guide is an essential accessory both for building wooden spearguns and as an add-on for already assembled spearguns. Its simplicity and light weight help avoid altering the trim of the line path, ensuring smoother, more precise reloading without obstructions.

Main functions

• Line guide and line pass-through to prevent tangles and premature line wear.
• Optimized line sliding during tensioning, making the speargun easier to swing and track.
• Mechanical support to maintain correct alignment of the shooting line connected to the shaft.

Spare Part Rivets for Freediving and Spearfishing Floppers

Peened rivets are an essential component for the maintenance and assembly of floppers designed specifically for freediving and spearfishing. Made of Stainless Steel, they provide high corrosion resistance and long-lasting durability in marine environments.

Available in 5 different sizes, these rivets allow installation on shafts of various diameters and models, ensuring compatibility with different technical flopper configurations.

Technical Features

• Material: Stainless Steel for high mechanical strength and durability while freediving
• Compatibility: Suitable for multiple flopper configurations for spearfishing and freediving
• Available variants: 5 sizes for shafts of different diameters and models

Use

Peened rivets are designed for changing and replacing floppers, making maintenance of underwater equipment easier. They provide a stable, long-lasting fastening, maintaining hydrodynamic efficiency and finning performance during freediving sessions.