Blade Gara Impulse - Blue Metal

The Impulse Blue Metal Blade is designed to deliver high performance in finning during freediving and spearfishing. Ideal for freedivers of all experience levels, it features a thin, lightweight blade with a swallowtail design, optimized to improve directionality in the water and thrust transmission.

The blade is equipped with non-slip side rails that reduce lateral water spill, thereby increasing propulsive efficiency. The 29-degree flex angle ensures an optimal balance between maximum performance and minimal energy expenditure. The structure is engineered to provide high impact resistance, helping prevent accidental breakage during use.

Technical Features

• Blade material: plastic polymer
• Swallowtail design to improve directionality and thrust
• Non-slip side rails to reduce lateral water loss
• Flex angle: 29° for propulsive efficiency
• High mechanical impact resistance
• Self-adjusting Gara Modular Foot Pockets in thermorubber
• 2 cm Self-Adjusting elastic band for an ergonomic fit
• Available in two colors: Black and Blue Metal
  

Gara Impulse Blade - Black

The Impulse Black Blade is designed to deliver high performance during finning for freediving and spearfishing. Ideal for freedivers of all experience levels, it features a thin, lightweight blade with a swallowtail design, optimized to improve directional control in the water and thrust transmission.

The blade is equipped with non-slip side rails that reduce lateral water spill, increasing propulsive efficiency. The 29-degree flex angle ensures an optimal balance between maximum output and minimal energy expenditure. The structure is engineered to provide high impact resistance, preventing accidental breakage during use.

Technical Features

• Blade material: plastic polymer
• Swallowtail design to improve directional control and thrust
• Non-slip side rails to reduce lateral water loss
• Flex angle: 29° for propulsive efficiency
• High mechanical impact resistance
• Gara Modular self-adjusting Foot Pockets in thermoplastic rubber
• 2 cm Self-Adjusting elastic band for ergonomic fit
• Available in two colors: Black and Metallic Blue
  

Foot Pocket 250 C4 for Freediving and Spearfishing

The 250 Foot Pocket by C4 represents the evolution of the 200 and 300 lines, designed to provide superior lightness and elasticity while optimizing comfort and thrust transmission during finning.

Technical Features

• Rigid insole in integrated co-molded polypropylene, for improved biomechanical support and greater efficiency in power transmission.
• Soft thermorubber upper, elastic, ensuring a comfortable fit even without fin socks, increasing freedom of movement and comfort under load.
• Rails reduced to a minimum, simplifying blade attachment and reducing the overall weight of the foot pocket for a more balanced trim in the water.
• Single-screw fastening system that speeds up assembly and disassembly, improving ease of use while freediving.
• Low weight of just 246 grams, a feature that contributes to greater agility during finning and reduced muscle fatigue.

Sizes and Color

• Available in 9 sizes: 36/37, 38/39, 39/40, 40/41, 41/42, 42/43, 43/44, 44/45, 46/47.
• Black color.

Benefits for Freediving and Spearfishing

The 250 C4 foot pocket combines lightness, elasticity, and a rigid insole to deliver an excellent balance of comfort and responsiveness. The reduced rails ensure better blade efficiency, allowing a smoother, less tiring kick, essential for freediving and spearfishing.

C4 250 Foot Pocket for Freediving and Spearfishing

The 250 foot pockets are a major evolution of the 200 and 300 series by C4, designed specifically for freedivers and spearfishers who demand lightness, elasticity, and optimal comfort during the dive.

Technical Features

• Soft thermorubber upper with elastic properties, designed to ensure a comfortable fit even without socks.
• Rigid polypropylene insole co-molded internally, providing stiffness and stability in power transfer during the fin stroke.
• Minimized side rails, reducing weight and making it easier to attach the foot pocket to the blade, optimizing the system’s hydrodynamic efficiency.
• Single-screw fastening system that speeds up assembly and disassembly, ensuring quick, practical gear preparation.
• Total weight of only 246 grams, helping reduce fatigue in the water and improving finning fluidity.

Benefits

The combination of light weight, soft materials, and a rigid insole allows the 250 foot pockets to deliver an ideal balance between comfort and effective power transfer to the blades. The third-degree preformed anatomical structure securely wraps the foot, improving stability during underwater activity.

Specifications and Availability

• Available in 9 sizes: 36/37, 38/39, 39/40, 40/41, 41/42, 42/43, 43/44, 44/45, 46/47
• Color: White

Mares X-Wing Foot Pocket for Freediving and Spearfishing

The X-Wing foot pocket by Mares is a benchmark for lightness and ergonomics in the world of freediving and spearfishing, as the lightest foot pocket available on the market, weighing just 270 grams.

Materials and Construction

Made with two different materials, the foot pocket integrates a specific reinforcement on the sole to balance comfort and performance in the water. This combination provides greater mechanical resistance to deformation caused by blade thrust, ensuring a responsive kick while reducing the effort required from the freediver.

Design and Technical Specifications

• No side rails, for improved fit and smoother movement
• 30° blade insertion angle, optimized for efficient power transfer
• Available in 7 sizes: 36/37, 38/39, 40/41, 42/43, 44/45, 46/47, 48/49
  
• Foot pocket assembly kit not included

Size Guidelines

X-Wing foot pocket sizes should be considered for bare feet. When used with 3.0 mm neoprene socks, we recommend purchasing one size up to ensure comfort and a proper fit.

Main Features

• Lightweight: minimal weight to reduce fatigue during kicking
• Ergonomics: shape designed to fit the foot perfectly without side rails
• Responsiveness: sole reinforcement to maintain shape and improve thrust transmission
• Comfort: materials selected to balance comfort and resistance in the water

Spare Foot Pocket for Razor Fins and Carbon Blades

The Razor spare foot pocket is designed to improve the fit and thrust transmission of fins used for freediving and spearfishing. It is compatible with most carbon blades from various brands, making it a versatile choice for those looking for reliability and comfort in the water.

Available in sizes 39/40, 41/42, 43/44, 45/46 and 47/48, it allows you to find the most suitable size to optimize fit and foot stability inside the fin.

Technical Features

• Compatibility: suitable for Razor fins and composite and carbon blades from different brands
• Materials: made with high-quality components to ensure mechanical strength and durability
• Fit: improves the connection between foot and blade, ensuring effective thrust transmission and a smooth fin stroke
• Size availability: wide range for a perfect pairing and optimal comfort

Important Notes

• The price refers to a single foot pocket
• The mounting kit is not included and must be purchased separately

This foot pocket is one of the most widely used in the freediving and spearfishing sector thanks to its reliability and its ability to efficiently integrate different carbon blade models, helping to improve responsiveness and finning fluidity.

Elastomer Foot Pockets for Libeccio Fins

Foot Pockets from the Libeccio line made of elastomer, designed to provide optimal softness and comfort during freediving and spearfishing sessions. They are reinforced over the instep to ensure greater mechanical resistance and protection in high-stress areas.

These foot pockets are designed to ensure an excellent fit and compatibility with the Sport and Elite Blades from the same Libeccio line, ensuring efficient power transfer and smooth finning.

Technical features

• Material: Elastomer, for elasticity and thermal comfort
• Reinforcement over the instep for greater durability
• Compatibility: Libeccio Sport and Elite Blades
• Color: Black-Red
• Available Sizes: 39/40, 41/42, 43/44, 45/46, 47/48

The elastomer construction ensures a comfortable fit and good freedom of movement, while maintaining the protection and durability required during spearfishing and freediving sessions.

Salvimar K-Reinforced Foot Pockets for Freediving and Spearfishing

The Salvimar K-Reinforced foot pockets are specifically designed for freediving and spearfishing, combining technical innovation and selected materials to ensure high durability and comfort in the water. The special construction integrates multiple layers of thermorubber and textile fiber, ensuring a comfortable fit and excellent resistance to deformation even under the intense stress typical of underwater activity.

This advanced design helps maintain the foot pocket’s elasticity and shape, allowing effective compression and greater sensitivity during finning, while also protecting the foot on rocky or uneven bottoms.

Available in the remaining sizes 38/40 and 41/42, the K-Reinforced foot pockets are an ideal technical choice for safe and comfortable freediving and spearfishing.

Note: Mounting kit included

C4 Anatomical Insoles for Freediving and Spearfishing

The C4 anatomical insoles are specifically designed for freediving and spearfishing users, with special attention to shape, design, and materials to improve comfort and performance in the water.

The anatomical structure of the insoles helps reduce empty spaces inside the foot pockets, often caused by the symmetrical shape of the right and left foot. Without dedicated insoles, these spaces can lead to reduced fit and heat loss.

Technical Features and Benefits

• Comfort and fit: the insoles help support the plantar arch, ensuring a precise, stable fit inside the foot pocket and reducing fatigue during finning.
• Improved finning control: the better fit allows more efficient transfer of propulsive force, optimizing thrust and fin responsiveness during freediving.
• Thermal insulation: reducing empty spaces limits the flow of cold water, keeping the foot at a more stable temperature and reducing the risk of muscle cramps in the water.
• Compatibility: perfectly adaptable to C4 foot pockets and suitable for use with most foot pockets on the market, thanks to the option to trim them along predefined lines.

Size Specifications

The C4 insoles are available in three size ranges, covering a wide range of usable Sizes:

• 38-41
• 41-43
• 44-47

The insole can be shaped along the pre-marked cutting line to achieve a custom size and optimal fit inside the foot pocket.

X-Wing Blade - Mares

The Mares X-Wing blade is a high-level technical solution for freedivers looking for the perfect balance of agility, power, and control in the water. Made from high-quality elastomer, this blade is designed to deliver a smooth, stable, and high-performance fin stroke, adapting to the needs of those practicing freediving and spearfishing at every level.

Tapered Design and Variable Thickness

The tapered profile of the blade helps reduce water resistance during the fin stroke, promoting more agile and efficient movement. The variable thickness is one of the key elements of this design: it optimizes flex along the full length of the blade, delivering high propulsive performance without sacrificing maneuverability. The result is a blade that responds precisely and naturally to every leg kick.

V-Shaped Tip for Greater Stability

The distinctive V-shaped tip is specifically designed to ensure a more stable and directional fin stroke. This geometry reduces lateral water slippage, improving propulsive efficiency and movement precision—essential in hunting situations or during deep freedives.

Technical Features

• Material: high-quality elastomer
• Blade length: 713 mm
• Blade width: 190 mm
• Thickness: variable along the entire blade
• Tip: V-shaped design to prevent lateral slippage
• Flexibility: 30% softer than the Razor Pro model

X-Wing Pro Blade - Mares

The X-Wing Pro Blade is designed for freedivers seeking the perfect balance of agility, power, and control. Made from high-quality elastomer, this tapered blade delivers a smooth, efficient kick, perfectly adapting to the needs of those practicing high-level freediving and spearfishing.

Design and Technology

The tapered profile of the blade is not just aesthetic: it is the result of a precise technical choice. The variable thickness allows flex to be optimally distributed along the entire blade, ensuring high finning performance without sacrificing maneuverability or effective length.

Technical Features

• Material: high-quality elastomer, durable and high-performance
• Tapered profile with variable thickness for maximum hydrodynamic efficiency
• V-tip for a more stable kick and to eliminate lateral water slippage
• Large load-bearing surface for powerful thrust with every fin stroke

Dimensional Specifications

• Blade width: 19.0 cm
• Blade length: 71.3 cm (713 mm)

Why Choose the X-Wing Pro

The X-Wing Pro elastomer blade is the ideal choice for those who want a responsive, stable, high-performance fin. The V-tip reduces lateral water dispersion, translating every movement into direct, precise thrust. Ideal for freediving and spearfishing sessions where agility and control make the difference.

Single Blade Umberto Pelizzari - Sideral

The Sideral single blade, designed in collaboration with Umberto Pelizzari, is available in the Soft - 25 stiffness version. This feature provides an optimal balance between flexibility and thrust, essential for a smooth, responsive fin stroke during freediving or spearfishing.

The choice of material and selected stiffness deliver efficient power transfer without overloading the leg, improving energy management and stability in the water.

Single Blade Umberto Pelizzari - Aurea

The single Aurea blade, designed in collaboration with Umberto Pelizzari, is available in Soft - 25 stiffness, ideal for those who prioritize a fluid finning stroke and good adaptability when spearfishing.

This blade offers a balance of responsiveness and comfort in power transfer, optimizing efficiency in the water and reducing muscle fatigue during freediving descents.

Single Blade Umberto Pelizzari

The single blade Umberto Pelizzari is specifically designed for freediving and spearfishing, ensuring efficient power transfer and a smooth fin stroke. Available in two different stiffness levels, it lets you choose the ideal rigidity based on your needs for comfort and responsiveness in the water.

C4 Carbon 300 Foot Pockets for Freediving and Spearfishing

The 300 Foot Pockets represent an innovation in Freediving and spearfishing equipment by C4 Carbon. Their name comes from their low weight, just over 300 grams, which helps significantly reduce fatigue during underwater finning.

Technical Features and Materials

Made with an innovative material that provides mechanical strength seven times higher than traditional materials, these foot pockets combine lightness and toughness without compromising durability. The internal volume has been optimized to ensure high ergonomics, minimizing thickness in contact with the foot, improving comfort and adaptability during the dive.

Anatomy and Comfort

The anatomy of the 300 Foot Pockets provides a unique fit, achieved by overlapping the shapes of the anatomical Mustang shoes, with a third-degree pre-forming that increases their effectiveness. Energy transfer is distributed evenly across the entire contact surface, preventing irritation points or stiffness. This allows for better blade stability during the kick, with reduced pain and greater propulsion efficiency.

Hydrodynamics and Design

The design of the 300 Foot Pockets is aimed at minimizing hydrodynamic drag: the lines are fluid and continuous, with no steps or interruptions, to facilitate water flow. The glossy surface further contributes to smooth glide, optimizing fluid movement in the water and reducing fatigue for the spearfisher.

Technical Specifications

• Weight: approximately 315 grams in size 40-41
• Reduced internal volume for lower energy expenditure during finning
• High mechanical-strength material
• Snug anatomical fit with 3° pre-forming
  
• Available colors: Black, White, and Silver

Use and Compatibility

The foot pockets are designed for use with blades from the C4 line, but can also be adapted to other blades using the dedicated kit, to improve thrust transfer and finning efficiency.

Attention: The 300 Foot Pockets are sold as a single piece.

C4 Carbon 300 Foot Pockets for Freediving and Spearfishing

The 300 Foot Pockets are an innovation in freediving and spearfishing equipment by C4 Carbon. Their name comes from their low weight, just over 300 grams, which helps significantly reduce fatigue during underwater finning.

Technical Features and Materials

Made from an innovative material that provides mechanical strength seven times greater than traditional materials, these foot pockets combine lightness and strength without compromising durability. The internal volume has been optimized to ensure high ergonomics, minimizing thickness in contact with the foot, improving comfort and fit adaptability during the dive.

Anatomy and Comfort

The anatomy of the 300 Foot Pockets provides a unique fit, achieved by overlapping the shapes of the Mustang anatomical shoes, with third-degree preforming that increases their effectiveness. Energy transfer is distributed evenly across the entire contact surface, preventing irritation points or stiffness. This allows better blade stability during the kick, with reduced pain and greater propulsion efficiency.

Hydrodynamics and Design

The design of the 300 Foot Pockets is aimed at minimizing hydrodynamic drag: the lines are smooth and continuous, with no steps or interruptions, to help water flow. The glossy surface further enhances glide, optimizing fluid movement in the water and reducing fatigue for the spearfisher.

Technical Specifications

• Weight: approximately 315 grams in size 40-41
• Reduced internal volume for lower energy expenditure during finning
• High mechanical-strength material
• Snug anatomical fit with 3° preforming
• Available in 3 sizes: 38/39, 42/43, 44/45
• Available colors: Black, White, Blue, Brown, Silver

Use and Compatibility

The foot pockets are designed for use with C4 line blades, but can also be adapted to other blades with the dedicated kit, improving thrust transfer and finning efficiency.

Warning: The 300 Foot Pockets are sold as a single piece.

300 C4 Carbon Foot Pockets

The 300 Foot Pockets represent the latest innovation from C4 carbon in footwear for freediving and spearfishing. Weighing just over 300 grams, these foot pockets offer outstanding comfort and an extremely low volume that optimizes hydrodynamics during the fin stroke.

Design and Technical Features

The design of the 300 Foot Pockets is based on a balance between tradition, innovation, and technical functionality, with engineering focused on reducing volume and, consequently, water resistance and effort during movement.

• Reduced internal volume, a key element for minimizing perceived weight in the water
• Actual weight of just 315 grams in size 40-41, about half that of traditional foot pockets (600-750 grams)
• Material with mechanical resistance seven times higher than conventional materials
• Sinking characteristic, functional for trim during freediving and spearfishing

Anatomy and Comfort

The anatomy of the 300 Foot Pockets is derived from the overlapping anatomical shapes of the Mustang foot pockets, with a maintained third-degree pre-forming. The result is a unique, very enveloping fit that effectively distributes energy across the entire contact surface of the foot.

• Minimal thickness in contact with the foot for high adaptability and comfort
• Reduced painful pressure points
• More uniform energy transmission, improving finning efficiency

Hydrodynamics and Design

The shapes of the 300 Foot Pockets are designed to promote a continuous, uninterrupted hydrodynamic flow, eliminating steps and surface breaks. This results in a significant reduction in drag in the water and consequently less fatigue.

• Smooth, glossy surfaces for optimal glide while diving
• Design inspired by the natural efficiency of aquatic forms

Additional Details

• Colors: Black, White, and Silver
• Sold individually
• Compatible with C4 line blades or adaptable via kit to blades from other brands to improve thrust transmission

Adapter kit for C4 300 foot pockets on 2-hole blades

The adapter kit allows you to mount C4 300 foot pockets on blades with a standard 2-hole attachment, expanding foot pocket compatibility with various freediving and spearfishing blade models.

Designed to ensure a secure and precise fit, this kit lets you use foot pockets that were not originally designed for the specific blade, while maintaining proper hold and comfort during finning.

H. Dessault 350 Black Foot Pocket for Freediving and Spearfishing Fins

The H. Dessault 350 Foot Pocket is designed with a pre-shaped fit and differentiated thicknesses to optimize energy transfer from the foot to the blade without increasing overall weight. This feature improves responsiveness and finning efficiency during freediving and spearfishing dives.

The thin sections provide a high level of comfort, allowing extended use of the fins without foot fatigue.

Technical Features

• Material: TPE 75 ShA and high-modulus TPA, selected to combine elasticity and mechanical strength
• Weight: 350 grams for size 41-42
• Third-type pre-shaped anatomy for an ergonomic fit and improved hold
• Variable thicknesses to balance comfort and thrust transmission
• Mechanical fastening with safety screw for quick, stable assembly
• Compatible with interchangeable blades, ideal for customizing your gear to specific needs
• Available in 6 sizes: 36-37, 38-39, 40-41, 42-43, 44-45, 46-47
• Color: black (Black)

Assembly and Compatibility

The screw fastening system ensures solid, simple assembly of the foot pocket onto the blade, improving smoothness and control during underwater finning. The ability to use interchangeable blades makes this foot pocket versatile for different freediving and spearfishing gear configurations.

Replacement Screw Kit for C4 200 Foot Pockets

The kit includes a complete set of replacement and assembly screws specifically designed for C4 200 foot pockets. These components are essential to ensure proper fastening and maintain the structural integrity of the foot pockets during freediving and spearfishing activities.

The precise screw compatibility ensures optimal assembly, contributing to the durability and comfort of your freediving equipment while preventing failure points or loosening during dives.

Mounting Screw Kit for 250 C4 Foot Pockets

Complete screw kit with M6 threading, specifically designed for mounting 250 foot pockets C4 on freediving and spearfishing blades. The screws feature hand-tightening nuts to ensure quick and secure fastening without the need for tools.

The finish is black, corrosion-resistant in marine environments, ensuring durability and reliability during underwater use.

The kit includes everything needed for the complete installation of a pair of foot pockets, making assembly precise and stable.

Insole for Gara Modular Fins

The Gara Modular insoles are designed to improve thrust transmission and optimize the fit of any fin or foot pocket, especially when the fit is too roomy.

Made from fully recycled semi-rigid material, they provide a good balance of stiffness and comfort, contributing to improved finning efficiency during freediving and spearfishing.

The insole is compatible with foot pockets from size 38 to 47 and can be precisely adjusted thanks to the pre-printed guide lines, which make it easy to trim to three different sizes for an optimal fit.

This insole is recommended for use with thin socks in temperate waters, improving thrust transmission without compromising sensitivity and comfort in the water.

• Semi-rigid recycled material for mechanical strength and environmental sustainability
• Adjustable to sizes from 38 to 47 via guided trimming
• Supplied as a pair for right and left foot
• Optimizes fit in fins with thin socks

Speargun for Freediving Spearfishing ApneaMaster 75 cm

The ApneaMaster 75 cm speargun is specifically designed for freediving spearfishing, providing an ideal balance between power and maneuverability. Its 75 cm size makes it suitable for medium-depth waters, making tracking and camouflage easier.

Materials and Construction

The main body is made from high-quality marine wood, known for its light weight and mechanical resistance in saltwater. The ergonomics of the handle are designed for a secure, comfortable grip during extended dives, allowing precise control of the speargun.

Technical details

• Diameter: 6.5 mm, ideal for a good balance between accuracy and power.
• Mechanism: reliable, fast trigger system that promotes responsiveness in the water.
• Trim: carefully balanced for smooth tracking and effective camouflage during freediving spearfishing dives.
• Band guides: reinforced to ensure durability and safety under powerful load.

Use and tips

1. Position the band in the dedicated guides, ensuring proper tension for the shot.
2. Grip the handle firmly to maintain balanced trim during the dive.
3. Use the ergonomic sight to increase accuracy when lining up the target.
4. After use, rinse the speargun with fresh water to protect the materials from saltwater.

Technical advantages for freediving spearfishing

Thanks to its light weight and optimal balance, the ApneaMaster speargun supports efficient finning and natural tracking without tiring the freediver. The precision of the trigger system and the strength of the guides allow you to make the most of the band’s power, improving underwater shot efficiency.

C4 Mounting Screw Kit for 250 Foot Pockets

The mounting screw kit is specifically designed for the 250 Foot Pockets from C4, allowing quick and secure attachment to spearfishing blades. The screws, featuring M6 threads, ensure precise installation with hand-tightening nuts, making attachment easy without the need for tools.

Technical Features

• Thread: M6
• Nut type: Hand-tightening for quick and easy assembly
• Compatibility: C4 250 Foot Pockets model
• Color: Black
• Quantity: Complete kit for mounting one pair of foot pockets

Benefits of Use

This kit ensures a stable connection between the foot pocket and the blade, maintaining the optimal alignment required for efficient power transfer during freediving finning. The choice of hand-tightening nuts improves practicality during assembly and maintenance, reducing setup time even when gear needs to be prepared quickly.

Water Rails Kit for Carbon or Composite Blades

The Water Rails kit is made of rubber and specifically designed for installation on carbon or composite blades used in freediving and spearfishing. This replacement kit is compatible with C4 blades and other brands, providing a simple and functional upgrade.

Technical features

• Height: 10.0 mm
• Length: 1 meter
• Constant-type side profiles
• Material: rubber suitable for mechanical strength in underwater environments

Application

The side profiles are attached to the blade by bonding with cyanoacrylate glue, ensuring a stable and long-lasting hold. This type of installation helps optimize the blade’s hydrodynamics, improving finning smoothness and responsiveness when moving through the water.

HD Maxx Plastic Blade - H. Dessault

The HD Maxx blade is designed specifically for the needs of freedivers and spearfishers, combining advanced materials with a functional design to ensure efficiency and comfort in the water.

Materials and Construction

The blade is made from a soft hardness polymer compound, providing optimal flexibility combined with high elastic rebound, reducing effort during finning. This combination also delivers high breakage resistance, ensuring durability and reliability even during extended use.

Applications

The HD Maxx blades are ideal for both spearfishing and freediving, offering an effective balance between blade responsiveness, comfort, and mechanical strength. The blade’s light weight and elasticity optimize finning fluidity, making long sessions easier with less fatigue.

Sigalsub Tsunami Foot Pockets Mounting Kit

The Sigalsub Tsunami foot pockets mounting kit is designed to attach the blade to the foot pocket in a stable, practical, and secure way.

The system uses a single Allen screw for quick assembly and precise coupling between the blade and foot pocket.

The threaded nut is integrated into a plastic plate engineered to ensure a strong, long-lasting hold, keeping the connection stable even during intensive freediving and spearfishing use.

The kit is compatible with the connection system of Sigalsub Tsunami foot pockets equipped with short rails.

Mounting Kit for Mares Razor Foot Pocket

This mounting kit is specifically designed for the Mares Razor foot pocket, ensuring a secure and stable attachment of the foot pocket to the blade. The kit is sold per single foot pocket and includes all the components needed for effective installation.

Kit Components

• Blade-retaining plugs: essential elements for keeping the foot pocket firmly anchored to the blade, ensuring stability during finning.
• Self-tapping screws: designed for quick, long-lasting assembly, corrosion-resistant and optimized for use in marine environments.
• Side rail retaining clips: designed to effectively lock the side rails and prevent unwanted movement during in-water activity.

Use

The kit is designed to attach the foot pocket to the Mares Razor blade assembly, essential for ensuring proper foot positioning, improving control and power transfer during freediving or spearfishing finning.

Mounting Kit for Mares X-Wing Foot Pocket

The mounting kit is specifically designed for the Mares X-Wing Foot Pocket, ensuring a secure and precise connection between the foot pocket and blade.

The set includes:

• Dedicated blade retainer
• Self-tapping screws for a stable, long-lasting installation

The kit is sold for a single foot pocket, allowing for a targeted, customized installation.

This accessory ensures a reliable connection that optimizes power transfer during finning, improving responsiveness and control in the water.

Mounting Kit for Cetma S-Wing Foot Pockets

The mounting kit is specifically designed for Cetma S-Wing foot pockets, ensuring a secure and precise attachment between the foot pocket and blade.

The set includes:

• 2x foot pocket retaining inserts
• 4x self-tapping screws for stable, long-lasting installation
• 4x plastic blade-protection washers 

The kit is sold for one pair of foot pockets, allowing for a targeted, customized installation.

This accessory ensures a reliable connection that optimizes thrust transfer during finning.

Replacement screw kit for 350 H.Dessault foot pockets

This kit includes all the components needed to install and replace the 350 H.Dessault foot pockets, essential for maintaining the optimal fit and functionality of your freediving equipment.

• 2 plastic inserts
• 2 stainless steel self-tapping screws
• 2 plastic washers

The stainless steel material provides corrosion resistance in marine environments, ensuring long-lasting durability and reliability. The plastic washers and inserts help provide a stable, secure fastening, preventing loosening caused by vibrations or movement in the water.

The black kit is designed to integrate perfectly with the 350 H.Dessault foot pockets, preserving their trim and functionality during freediving or spearfishing.

Mounting Kit for Spitfire Sporasub Fins

The mounting kit is specifically designed for Spitfire fins, ensuring safe and reliable assembly of the blades. It includes all the elements needed to secure the blade to the side rail, ensuring long-lasting stability and durability.

Kit components

• Blade retaining inserts, designed to keep the blade in position without causing damage or deformation
• High-quality self-tapping screws, ensuring a solid fastening and corrosion resistance in the marine environment
• Side rail retaining clips, essential for locking the internal structure of the fin and maintaining proper alignment

This kit allows precise, functional assembly, improving thrust transmission and fin responsiveness during freediving and spearfishing activities.